Search results

O
P4P800DLX and serail ATA: unable to recover from standby

Hi. I don't think there is a driver for onboard SATA controller since WinXP recognizes it just fine. Installation for the OS went fine. I was able to boot up my computer, use it until I put in stand-by mode. When I come back, hit the power button the wake up from standby, the harddrive made...
- Obelix
- Post #3
- Mar 12, 2004
- Forum: Motherboards
O
P4P800DLX and serail ATA: unable to recover from standby

Hi. Just wondering if anyone else is having the same problem as I have with my Asus P4P800 Deluxe and Hitachi 80GB serial ATA harddrive. Works fine but I am unable to recover from stand-by mode. Always give me a blue screen kernel error. I had a ATA100 drive before and it works just fine when I...
- Obelix
- Thread
- Mar 11, 2004
- Replies: 2
- Forum: Motherboards
O
unable to wakeup from standby

After installing a new serial ATA harddrive, my pc is now unable to wakeup after using the standby feature in WinXP. This feature was working fine with my previous drive, a parallel ATA WD 40JB drive. Is there any incompatible issue between the Asus P4P800 Deluxe, SATA drives and WinXP that I...
- Obelix
- Thread
- Jan 1, 2004
- Replies: 0
- Forum: Motherboards
O
No video out when first turn on.

I flashed the bios back to 1007 and experienced the same issue this morning when i turn on my pc again. I did not realize about this problem after setting up my pc. I thought it is related to the ram timing issue what I was working at the time. I don't have a spare power supply and hate to buy...
- Obelix
- Post #8
- Jul 25, 2003
- Forum: Motherboards
O
No video out when first turn on.

Yes. I did flash the BIOS to v1009. I think there is a v10 Beta available on the web and haven't tried it. Originally the board came with bios v1007. I will try to swap with another video card tonight and will see what will happen. Thanks.
- Obelix
- Post #6
- Jul 24, 2003
- Forum: Motherboards
O
No video out when first turn on.

Hi Boonesmi. I have the Enermax 365-watt power supply. Do you think it's the source of the problem? But once I hit the reset button then it works normally until I power it on the next time. So far, I only have a video card, a floppy drive, a hard drive and a dvd burner which I think do not used...
- Obelix
- Post #4
- Jul 24, 2003
- Forum: Motherboards
O
No video out when first turn on.

I have this strange problem after putting my system together. When first turn on the computer, I have no video or signal going to the monitor. If I hit the reset button, the system reboots then everything is working as normal. Eleven hours later, I come home from work and power the computer on...
- Obelix
- Thread
- Jul 24, 2003
- Replies: 7
- Forum: Motherboards
O
most overclockable P4 cpu

Hi. I just wonder which one is the most overclockable cpu for the i875/i865 chipset motherboards ? I think someone mentioned the 2.4c Ghz cpu couple weeks back. Price difference between a 2.4 and 2.6 is very slim. Thanks.
- Obelix
- Thread
- Jul 23, 2003
- Replies: 3
- Forum: Motherboards
O
*** Official ASUS P4C800/Deluxe (875P) Thread ***

Hi jhites. Thanks for all the helps and explanations. I think I understand how things work now when tweaking with this setup.
- Obelix
- Post #358
- Jul 21, 2003
- Forum: Motherboards
O
Asus P4C800-E Deluxe + Kingston HyperX PC3500

Hi. I have the HyperX3500 512mb kit ( 2x 256MB module) installed on the Asus P4C800-E, bios 1009 and P4 2.8C. The tightest setting I can have is 2-3-2-5. BIOS corrupts if set at 2-2-2-5. Default setting since I am not into overclocking.
- Obelix
- Post #5
- Jul 21, 2003
- Forum: Motherboards
O
*** Official ASUS P4C800/Deluxe (875P) Thread ***

Hi jhites. Did you set your memory speed at 400 or 320 when overclocking? On my setup, if the memory is set at 400 then i can't go beyond 208 for cpu bus speed. If I lower my ram fsb to 320 then I can overclock my cpu fsb to 225 and haven't tried anything higher but my Sandra memory bandwith...
- Obelix
- Post #355
- Jul 21, 2003
- Forum: Motherboards
O
*** Official ASUS P4C800/Deluxe (875P) Thread ***

Hi jhites. I don't have the options to disable the performance mode or performance accelerator mode. I set both to auto and could not boot up with FSB higher than 208. System hangs after rebooting and got overclocking failure error message. So the best performance i can get right now out my...
- Obelix
- Post #352
- Jul 20, 2003
- Forum: Motherboards
O
*** Official ASUS P4C800/Deluxe (875P) Thread ***

Thanks jhites. I am unable to do what you can do or get from your boards. My setting for memory is 2-3-2-5. I set all settting as you suggested and it locks up/hangs right after reboot. I can't get my FSB to anything higher than 209. Performance mode is set to Standard and Performance...
- Obelix
- Post #350
- Jul 20, 2003
- Forum: Motherboards
O
*** Official ASUS P4C800/Deluxe (875P) Thread ***

Hi jhites. I have a similar setup with P4C800-E, P4 2.8C and HyperX3500K/512 and unable to run the memory at 2-2-2-5 as yours. It crashed every time I tried with voltage to 2.85. Can you please help us getting to your setting ? Thanks.
- Obelix
- Post #347
- Jul 20, 2003
- Forum: Motherboards
O
how long to run memtest86 v3 ?

Thanks the replies. I have a P4P800DLX, P4 2.8C and Corsair TWIX512-3700. Setting is 3-4-4-8 as recommeded by Corsair but memtest reports numerous errors. I thought the memory is bad so exchanged to Kingston HyperX3500 and duplicated the same problems. The Kingston is rated at CL2 but I lowered...
- Obelix
- Post #6
- Jul 18, 2003
- Forum: Motherboards
O
how long to run memtest86 v3 ?

If getting errors, then how many errors are acceptable or if a pair of memory is good then it should not be any errors?Thanks.
- Obelix
- Post #3
- Jul 18, 2003
- Forum: Motherboards
O
Kingston DDR to a P4P800

Hi Bawaji. Thanks for the reply. I tried 2-2-2-5 and my system was unable to post with mode turbo un-activated. I can't use the turbo mode in any setting I tried. I am not into overclocking and just want a fast and stable system at default speed. I did test each module on the first blue slot and...
- Obelix
- Post #9
- Jul 18, 2003
- Forum: Motherboards
O
how long to run memtest86 v3 ?

Hi. Does anyone know how long to run memtest86 v3 to find out whether the memory module is good or bad? Thanks.
- Obelix
- Thread
- Jul 18, 2003
- Replies: 6
- Forum: Motherboards
O
Kingston DDR to a P4P800

Hi. I have a similar setup but unable to make these to work together. P4P800 Deluxe, P4 2.8CGhz, and Corsair TWINX-3700 512MB. System is unable, keeps crashing and/or rebooting itself and BSOD. I exchange to Kingston HYPERX KHX3500K2/512 and have the identical problems. Run memtest86 v3 and it...
- Obelix
- Post #7
- Jul 18, 2003
- Forum: Motherboards
O
Memory for P4P800DLX

Hi. I set the voltage to 2.75volt as recommended by RAM GUY, the person who administers the forum at Corsair website. It did not help. I ran memtest86 v3 and it reported hundred of error failures at various addresses within the first few minutes. I sent it back to the vendor this morning. The...
- Obelix
- Post #3
- Jul 15, 2003
- Forum: Motherboards
O
Memory for P4P800DLX

I had bad luck with Corsair TWINX512-3700 and returned it to vendor. Setting was at 3-4-4-8 as recommended but WinXP was not stable and applications shut itself down numerous times. Thought that Corsair is good brand. I am not into overclocking so what is the best memory out there for this board...
- Obelix
- Thread
- Jul 15, 2003
- Replies: 3
- Forum: Motherboards
O
corsair or muskin memory module?

Hi. I am planning to buy the Asus P4C800 or P4P800 in a near future and wonder which brand of memory to purchase. Both Corsair and Muskin are good. If you have a choice, which brand would you pick. Thanks.
- Obelix
- Thread
- Jun 11, 2003
- Replies: 1
- Forum: Computer Building
O
raid setup on MSI 655Max board

Hi. I have the MSI 655 MAX motherboard and unable to make the RAID configuration to work with 2 ATA drives. There are 2 connectors for SATA and one connector for Parallel ATA. Tried to install my hard drives to the Parallel ATA and unable to make them work, either with master/master or...
- Obelix
- Thread
- Apr 12, 2003
- Replies: 2
- Forum: Motherboards
O
Unable to format with P4S533

Hi Budman. I checked the color coded connector and it did not help. The thing that trouble me is Windows Me is running fine on this setup while W2K and WXP are not. I call Asus tech.support this morning and the technician suspects I may have a bad memory module (?) but I don't have any problem...
- Obelix
- Post #15
- Dec 17, 2002
- Forum: Motherboards
O
Unable to format with P4S533

Hi. Thanks for the replies. I have double-checked the ide cable and the jumper setting. It's a single drive setup so WD recommends to remove the jumper (master only). Drive info does show up in the BIOS correctly. Windows XP Setup sees the drive and I can partition into two but formatting...
- Obelix
- Post #13
- Dec 17, 2002
- Forum: Motherboards
O
Unable to format with P4S533

Just wonder if anyone out there is using the P4S533 board with Windows XP Pro or Windows 2000 Pro. This board is not listed in the Microsoft Compatibility list for W2K and WXP which may be the answer for the problem I am having. The P4S533-E is listed though.
- Obelix
- Post #7
- Dec 16, 2002
- Forum: Motherboards
O
Unable to format with P4S533

Hi all. I've tried both cable select and master drive only configuration but still have the same problem. I have a spare Promise ATA100 controller and installed it in PCI slot4 but have the very same problem running off the Promise controller. This is a very weird problem. The drive comes with a...
- Obelix
- Post #5
- Dec 16, 2002
- Forum: Motherboards
O
Unable to format with P4S533

Hi. I am unable to install Windows XP Pro and/or W2K Pro on my setup. Asus P4S533 and Western Digital 80MB 8MB cache hard drive. Both XP and W2K recognize the partition but after formatting, I received an error stating that I have a bad/damaged drive. Weird thing is I was able to format this...
- Obelix
- Thread
- Dec 15, 2002
- Replies: 16
- Forum: Motherboards
O
CMOS battery keeps failing ?

Hi. For the past few days, since Thrusday night, my P4S533 boots up to a screen with the following error CMOS checksum error. Default loaded. CMOS battery failed. I replace the battery from my Asus P4B266 and it still gives me the same error. Do I have a bad board ? Once you hit "del" keys to...
- Obelix
- Thread
- Jul 28, 2002
- Replies: 3
- Forum: Motherboards
O
P4S533 and USB front ports problem!

Hi. I have the P4S533 and unable to make the USB front port of my CoolMaster case to work. The USB2 and USB3 connectors on the board seem to work only with the included usb adapter to be mounted on the back of the computer. I use the usb compact flash card reader and it works fine from the back...
- Obelix
- Thread
- Jul 6, 2002
- Replies: 3
- Forum: Motherboards
O
CPU/Memory frequency ratio for P4S533

Hi. Can someone please explain the meaning for the cpu/memory frequency ratio? I have a P4 2.26Ghz and a stick of Samsung 512MB DDR PC2700. Should I set the ratio at "auto" or manually set it to 4:5. Thanks in advance.
- Obelix
- Thread
- Jul 4, 2002
- Replies: 1
- Forum: Motherboards
O
No sound when captured with AIW Radeon

Dear rbv5. I think there is a misleading instruction on the installation. This is what I see in the manual as well as ATI has on their website. http://www.ati.com/support/connectors/radeonaiw/connectradeonaiwvideoinput.html If I connect the cable as instructed on the webpage above, I have no...
- Obelix
- Post #4
- Apr 19, 2002
- Forum: Graphics Cards
O
No sound when captured with AIW Radeon

Hi. Just wonder if anyone has sucessfully captured video using the ATI Radeon AIW. I connected as described in the manual, video in and sound in to the big purple dongle then connected to the AIW card. Select composite signal from ATI TV then capture the video. Video playback is fine but no...
- Obelix
- Thread
- Apr 18, 2002
- Replies: 6
- Forum: Graphics Cards
O
video capture card

Hi. Bought a Leadtek Geforce4 Ti4600 and it does not have video in. I would like to transfer video from my 8mm tape to computer and burn them to video cd. Any recommendation on a capture board and what is the best way to handle this are greatly appreciated. Thanks.
- Obelix
- Thread
- Apr 15, 2002
- Replies: 8
- Forum: Graphics Cards
O
Using 1 dimm or 2 dimms ?

Hi. Just wonder if it will be better to use 2 ddr modules or 1 ddr module on the P4B266 or on most motherboards in general. Thinking about getting a single 512MB ddr module or I should get 2 256MB module. Thank you.
- Obelix
- Thread
- Apr 4, 2002
- Replies: 3
- Forum: Motherboards
O
Soyo P4S Dragon Ultra

Thank you for the input. I don't overclock my computer so it should not be a problem. I am looking for a motherboard with stability and not having a problem out of the box. Reasons I select the Soyp P4S Dragon Ultra are the onboard Ethernet and the RAID controller built-in. Thanks once again.
- Obelix
- Post #7
- Feb 28, 2002
- Forum: Motherboards
O
Soyo P4S Dragon Ultra

Hi. I've been thinking about getting the Soyo P4S Dragon Ultra with the P4 2.0Ghz cpu. Just wonder if anyone has any experiences with this board? Any input is greatly appreciated. Thank in advance.
- Obelix
- Thread
- Feb 28, 2002
- Replies: 6
- Forum: Motherboards
O
is the new Athlon XP cooler?

Hi. Just wonder if the new Atlhon XP is running cooler than the Tbird series. My 1Ghz Tbird puts out quite a heat on the Asus A7V. Thank you.
- Obelix
- Thread
- Oct 25, 2001
- Replies: 2
- Forum: CPUs and Overclocking
O
Asus P4T abd SB Live!

I am just wondering if someone else has the P4T and the SB Live. I am experiencing a loud popping noise everytime I shut down my computer. Right at the moment when the power is cutting out. I have tried moving the SB Live card onto different PCI slots, from slot 1 to slot 5 but did not help...
- Obelix
- Thread
- Aug 29, 2001
- Replies: 2
- Forum: Computer Building
O
W2K and ATA100 controller

I plan to install W2K on the Asus CUSL2 board. I installed on the Intel VC820 and it's been working fine since it's an ATA-66 controller. I did the upgrade on the Asus CUSL2 couple weeks ago and received a message that i will need the update driver for the controller so I quit out of the...
- Obelix
- Post #4
- Jun 20, 2001
- Forum: Operating Systems

RESOURCES

Top Bottom