thanks mate - CRAZY though isnt it............ that all these problems have occured because Gigabyte cant even get the voltages correct!!!!!!!!!
I am still a bit lost why 1 stick of memory would fail +0.3 and the other was fine, but the memory was fine at +0.0.
I would have thought it was...
ANOTHER UPDATE: You will be amazed!!!!!!!!!!!
I had tested the memory (read earlier posts) and 1 stick failed the other passed in Prime. The voltage was set to +0.3 (the memory is rated for 2.1V (1.8+0.3))
I dropped the voltage to +0.0 in the bios and the memory that was crashing passed...
ANOTHER UPDATE:
I had tested the memory (read earlier posts) and 1 stick failed the other passed in Prime. The voltage was set to +0.3 (the memory is rated for 2.1V (1.8+0.3))
I dropped the voltage to +0.0 in the bios and the memory that was crashing passed Prime for 3 hours. I then...
i am running my system at default mobo and processor........ I have tried upping the vcore voltage slightly and the mem voltage, but this doesnt work......
i have tried running the vcore at 1.33 and it does the same...........
I am not really trying to overclock at the moment, just want a stable system first
well i started getting more fails, blue screens etc...... so tested with both memory again and it failed several times in Prime95 on different tests.......
UPDATE:
I have completed tests with both sticks of memory 1 at a time:-
Everything set at stock (slack timings):-
memory @ 5 5 5...
well i started getting more fails, blue screens etc...... so tested with both memory again and it failed several times in Prime95 on different tests.......
UPDATE:
I have completed tests with both sticks of memory 1 at a time:-
Everything set at stock (slack timings):-
memory @ 5 5 5...
When running most games
e.g.
Tiger Woods
Medal of Honour Airbourne
Overlord
GRAW2
and maybe others...... it comes up with some weird event log entries
Could you please check the event log and click on Application and see if you have some entries
Called Desktop Windows Manager...
thanks for everyones help so far :)
well this morning it was still okay (9 hours) So I am going to leave it whilst at work which will be another 10 hours........ If it is still green I guess its working fine now with the increase voltage........
Its running at 2.7 at 3v (in bios) with mem...
cheers mate :)
i think upping my memory voltage to +.3 seemed to have sorted the prime95 failing. Been running now 2 hr 20mins. Will keep it running over night
Okay tried upping my memory voltate to +0.2 and it failed after 80minutes again.
I have now decided to do the following:-
I have updated the bios to F4 (seemed to go okay)
Reset to optimal settings
Changed the memory voltage to +0.3
Changed memory settings to 4 4 4 12
Changed cpu...
i will eventually............
but i was trying to take it one step at a time..........
hence prime95 at stock.........
but the errors im getting is bugging me at stock
cheers mate........
I can try them........
But the worrying thing this is at default cpu (2400) and default memory (5 5 5 15).
Is this normal that you have to increase vcore and memory volts?
The other thing that worries me is that cpu-z shows such a lower figure and that to me could...
Hi fellow OCukers,
I have a P35C-DS3R and q6600 q0 chip........ (full specs at bottom)
My system was running stable so I decided to run Prime95 25.4 at stock to make sure the CPU was fine before I started overclocking.
The first time I run it 2 cores failed at around 1 hour. Temps...
Hi fellow OCukers,
My system was running stable so I decided to run Prime95 25.4 at stock to make sure the CPU was fine before I started overclocking.
The first time I run it 2 cores failed at around 1 hour. Temps seemed to get up to around 58 for 2 cores and 53 for the other 2.
I had...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.