Search results

C
Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

I have installed win7 64bit RC. Runs with no problems at all. :)
- cammell
- Post #11
- Aug 3, 2009
- Forum: Motherboards
C
Problem with microsoft network

Tried, but not succesfull www doesnt work, ping doesnt reach main router and further... strangely instant messaging program went online (have no clue how)
- cammell
- Post #10
- Jul 31, 2009
- Forum: Networking
C
Problem with microsoft network

I made better pic of my network better scheme So, if im correct, it is impossible to have microsoft network over this Im i correct ?
- cammell
- Post #8
- Jul 30, 2009
- Forum: Networking
C
Asrock 4CoreDual-SATA2 + ASRock 4CoreDual-VSTA + ASRock 775Dual-VSTA

Yeah Mr Vain :) Since i was looking for info about this mobo (Asrock 4CoreDual-SATA2 ) im a member of anandtech forum, here i found most informations about it. Mobo is good, working as main PC near two years - with no problems :) Greetz !!
- cammell
- Post #5
- Jul 30, 2009
- Forum: Motherboards
C
Problem with microsoft network

Thanks JackMDS, RADUQUE !! Tried yesterday with changing wifi client/router dhcp settings, and with dhcp set off or to client - pc2, and pc3 didnt work. Could you look at my routers settings, and tell me exactly which DHCP should i change ? There is picture attached: routers_settings
- cammell
- Post #5
- Jul 29, 2009
- Forum: Networking
C
Problem with microsoft network

Hello I have set up home network, like on the scheme: Scheme Internet is working fine, also can ping all computers. Microsoft network however is working only beetween PC2 and PC3. Any suggestion ? Greetz Pawel
- cammell
- Thread
- Jul 27, 2009
- Replies: 11
- Forum: Networking
C
Overclock GA-945GCM-S2L - disappearing drive

I have GA-945GCM-S2L mobo and E2160 CPU. Tried to overclock to mere 3GHZ, but FSB above 250MHz gave me strange resoults. One of IDE ports settings just disappear, making my sata drive (!!) unvisible to system. After reading default settings, all went back. Do you thing that bsel mod may solve...
- cammell
- Thread
- Feb 6, 2008
- Replies: 0
- Forum: CPUs and Overclocking
C
Asrock 4CoreDual-SATA2

OVERCLOCKING STORY CONTINUES... Have solved some HSF installing problems on different topic, now CPU is 30-32 C idle @2900. Unfortunatelly - when comming to stress (ORTHOS or even Cinebench9.5) its reseting. Have noticed that temp went @44 C when comp went reboot. Im using TAT for...
- cammell
- Post #333
- Dec 3, 2007
- Forum: Motherboards
C
Asrock 4CoreDual-SATA2

It seems you are using different MOBO since 4coredual-sata2 has only two DDR2 slots. Or maybe you were "succesful" inserting DDR2 memory in DDR slots ... :/
- cammell
- Post #332
- Dec 3, 2007
- Forum: Motherboards
C
Too high temp on E2180@2850

GuitarDaddy: CPU volts: 1,32 DDR - 181MHz (ddr333-loose timings) When ORHOS - temp goes rapidly to 45 and further to around 55-60 then reseting Cant do much in BIOS about overclock settings, any CPU volt rising is hard-mod case. VirtualLarry Some forum people like MrVain keeps their...
- cammell
- Post #7
- Dec 2, 2007
- Forum: CPUs and Overclocking
C
Too high temp on E2180@2850

Thanks for suggestions :) Have cleaned both, CPU & HS, applied rice amount of AC5 and it works. Now idle is 30-32 C. BUT still, ORTHOS makes computer reset after ~15 min. Will it make a different if i change HSF to budget AC Freezer 7 PRO PWM ??
- cammell
- Post #4
- Dec 2, 2007
- Forum: CPUs and Overclocking
C
Too high temp on E2180@2850

Hello Ive overclocked E2180 on ASROCK 4coredual-sata2 MOBO to 2850. When trying 3GHz im getting BSOD right after boot. My PSU is CHIEFTEC 400W, GFX 7300GT. Cores temp on idle is ~52C, after starting ORTHOS it takes few minutes to computer reset due overheat. Have instaled box HSF, pins...
- cammell
- Thread
- Dec 2, 2007
- Replies: 7
- Forum: CPUs and Overclocking
C
Asrock 4CoreDual-SATA2

At least - BSEL mod sucesfull - before my conductant wasnt conducting ;) JUST STIRL IT UP Can run about 2850MHz - an on ORTHOS after few minutes cores (metered by SPEEDFAN) are 80C and comp is reseting. At 3GHz BSOD just after boot. Will search an opinion if its a cooling or proc problem.
- cammell
- Post #324
- Dec 1, 2007
- Forum: Motherboards
C
Asrock 4CoreDual-SATA2

Thans Mr Vain Will give a try this 1.60a Now overclocking is working to about 270Mhz - after that processor keeps value 2.7GHz even with 340MHz FSB. Othos tests @2.7GHz was positive for 3h - but when i woke up computer has been reseted. Proc temp was about 50C, cores about 70C. Im using...
- cammell
- Post #319
- Nov 29, 2007
- Forum: Motherboards
C
Asrock 4CoreDual-SATA2

DOES ANY ONE KNOW WHY CANT I SEE INTEL SPEEDSTEP In my menu - advanced -> cpu ??? CPU IS E2180 That drives me maaad
- cammell
- Post #305
- Nov 27, 2007
- Forum: Motherboards
C
Asrock 4CoreDual-SATA2

Finaly, yesterday have recived 4coredual-sata2 & E2180.. Strange, but winXP from previous P4 run on new motherboard, will install new anyway - its booting to long. First i run on default. Run smooth. Tried to overclock and if fails. Couldnt find anywhere in BIOS, (advanced CPU) something like...
- cammell
- Post #289
- Nov 22, 2007
- Forum: Motherboards
C
Asrock 4CoreDual-SATA2

Hazelnut Well, than maybe E2180 would be better choice @ FSB like 290... Will think about
- cammell
- Post #230
- Nov 8, 2007
- Forum: Motherboards
C
Asrock 4CoreDual-SATA2

Reasuming Am still planning to buy this mobo - cheapest upgrade from XP3200 since no need for memory/graphic card repleace. Correct me please if i got things wrong. This mobo will go round 300MHz FSB easly with simple processor mod (plan E2140) Also, wont have problems with AGP card (Palit...
- cammell
- Post #228
- Nov 8, 2007
- Forum: Motherboards

RESOURCES

Top Bottom