u konw what's wierd is i have it all turned off, but cpu-z still says that my processor is flipping between x6 and x8 multiplier so I dunno.
I'm at 1700 mhz bus, 3.4 ghz
NB at 1.275 vcore +0.25 - bios
vcore shows 1.072v - cpuz no load
vcore shows 1.280v - cpuz w/ prime 95 after 1 min on small eft test
i can go up to 3.8, but i'm just keeping it at its current setting.
try going up to 1700. mine wouldn't post between 1550-1675 (somewhere in there...
i've running my e7650 @ 3.4 for about a week without a crash now. had to up vcore and nb by 3 steps. it's been fairly cold so i can't really judge how hot things are running fairly.
CPU-Z still shows my vcore voltage at 1.288, I keep wanting to push the CPU so much harder since I have a lot of vcore to go before i hit intels termal limit.
My E6750 @ 3.4. vcore and NB are bumped up 2 steps. core temp under no load is ~30C. Under prime 95 it stays around 55C. was prime95 stable over night.
My m/b died about a week ago and newegg sent me a replacement. This new one runs MUCH cooler. E6750 o/c to 3.4. NB was bumped up 2 steps as was vcore. core temp reads ~55C under load with prime95. With my first m/b I would be in the mid 60C's
My m/b died about a week ago and newegg sent me a replacement. This new one runs MUCH cooler. E6750 o/c to 3.4. NB was bumped up 2 steps as was vcore. core temp reads ~55C under load with prime95. With my first m/b I would be in the mid 60C's
I'm running a MSI P6N Platinum board w/ the E6750. I can get it to 3.6ghz, but when I get it to that speed, my processor core temps rise to 67C. What's interesting is my vcore under cpu-z is never above 1.325v. Is this normal?
So it looks like I can hit 1800fsb w/ a .05 vcore increase and NB at 1.4. What's interesting is my load temp gets to 67c, but the vcore shows under 1.325 at all times. is this normal to have such a high processor core temp, but with a vcore that doesn't show much increase over stock?
no adjustment to anything other than vcore was needed. I did have to manually set my memory timing and power though. crucial ballistix pc6400 4-4-4-12 @ 2.2volts.
With my P6n Platinum & E6750, I can hit a FSB of 1713 (So memory is 800mhz). I did need to increase Vcore by .01250 though. No other changes were needed. It's likely that I can o/c even more, but I haven't tried yet. Computer seems fairly stable. Will need to run prime 95 tonight.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.