Search results

  1. B

    how to make a disk bootable

    i tried the CD repair method, i was dropped into a DOS-like prompt, i tried fixmbr, fixboot, none of them put any of those boot files on the disk... also thanks for the advice on backup, i do burn all pics to cd/dvd, the rest i could just re-install
  2. B

    how to make a disk bootable

    the MoBo's BIOS allows either SATA drive to move up in the boot sequence, my problem is whatever is needed to boot up is not on the 2nd disk, where the OS is
  3. B

    how to make a disk bootable

    i have a system that has 2 SATA drives, i installed Windows XP on the 2nd disk, that is the disk is behind the other disk in boot order, i noticed even though the OS installation(directories and etc) is on the 2nd disk, there are some "boot" files on the 1st disk such as "ntldr", "boot.ini". so...
  4. B

    1988 vs 2008

    back in the days, could people buy parts and put together a system by themselves or you pretty much had to buy a prebuild?
  5. B

    AMD K10.5 is 10-20 percent faster than K10

    competition's good
  6. B

    Best Motherboard for the price for moderate Overclock?

    unless you record stuff on a regular basis and need to offload to your pc frequently USB 2.0 is good enough
  7. B

    why can't I overclock more than 3.1ghz

    ^what he said
  8. B

    why can't I overclock more than 3.1ghz

    I doubt a 300W power supply could have 25 Amps on its 12V rail, even if it has more than one 12V rail.
  9. B

    What reading in SpeedFan corrresponds to NB temp?

    i have E2200/Gigabyte GA-73VM-S2 if it matters
  10. B

    Is Vcore CPU specific or mobo specific?

    also as far as i can tell, PM is working...
  11. B

    Is Vcore CPU specific or mobo specific?

    oh and multi is set to 6
  12. B

    Is Vcore CPU specific or mobo specific?

    320 FSB and Prime95'ing...core temps around 65C and Vcore 1.38V, i increased BIOS voltage to 1.42V though, so a vdroop of .04V? update: been Prime95'ing almost 10 hours now, still running with around 65C, i did saw it peaked up to 67C occasionally
  13. B

    Is Vcore CPU specific or mobo specific?

    Larry, this is embarrasing, but how do i enable PM? i will try lower my multi to get the highest FSB.
  14. B

    Is Vcore CPU specific or mobo specific?

    interesting info, what about my question on FSB wall as it relates to MoBo's?
  15. B

    Is Vcore CPU specific or mobo specific?

    another question i have, is FSB wall CPU specific or MoBo specific? obviously the higher the multi the higher one can overclock that particular CPU, but at the same time i hear this notion about a MoBo being a good overclocker, that would mean a good board also has some influence on how high can...
  16. B

    Is Vcore CPU specific or mobo specific?

    don't think it's the auto update, so when increasing BIOS voltage i can up a little more than 1.4V, because vdroop would make the actual Vcore below 1.4V?
  17. B

    Is Vcore CPU specific or mobo specific?

    ah...ok, back to aigomorla's explanation, when i raised BIOS voltage from 1.3V to 1.312V, 2 increments of 0.006V which is my MoBo(Gigabyte GA-73VM-S2)'s predefined smallest unit, in both SpeedFan 4.33 and CPU-Z 1.43, the Vcore reading is still 1.2xxxV well below 1.3V, i know there is this vdroop...
  18. B

    Is Vcore CPU specific or mobo specific?

    SpeedFan 4.33, "Readings" tab, lower left hand coner, there are 2 numbers labelled "Vcore1" & "Vcore2", Vcore1's reading is 1.26V, Vcore2's reading is 1.82V. Why is that, i have set the BIOS voltage back to the original/default 1.3V for my E2200.
  19. B

    Is Vcore CPU specific or mobo specific?

    in SpeedFan 4.33, there are 2 vcore voltages being shown, the 1st one seems to corrspond to what i set, but the 2nd always shows 1.8V even before i raised vcore, what's up with that?
  20. B

    Is Vcore CPU specific or mobo specific?

    so is 10% a safe bet for E2200?
  21. B

    Is Vcore CPU specific or mobo specific?

    The specification of E2200 is "1.162V-1.312V", maybe i'm not looking at the right number. But i constantly see people raise their Vcore to 1.38 or 1.4, i thought you are not supposed to increase more than 10%?
  22. B

    Replaced PS have question on antec EW 380

    make sure the CPU fan is plugged in, as trivial as that sound...
  23. B

    anyway to use onboard and stand alone cards at the same time?

    Any help would be appreciated...
  24. B

    What's the Synchronous RAM speed w/a 1333FSB proc?

    unless you are running multiple 64 bit OS's, and vmware and everything, why do you need more than 2G of memory?save the money and get a better video card/bigger disk/quality cooler/better power supply...the list goes on
  25. B

    anyway to use onboard and stand alone cards at the same time?

    i meant using the 2 video cards connected to 2 monitors at the same time
  26. B

    anyway to use onboard and stand alone cards at the same time?

    any software or just bios settings?
  27. B

    Speedfan 4.33

    Is there a chart detailing correlations between FSB frequency and VCORE value? i assume it's CPU & motherboard specific, but still even if it's only for populars like Gigabyte's P35's, does such a chart exist?
  28. B

    Speedfan 4.33

    ok, both tests stopped, reporting hardware failure, does that mean i need to scale down FSB, and start thinking about raising vcore?
  29. B

    Speedfan 4.33

    I got both CoreTemp 0.96.1 and SpeedFan 4.33 reporting the same temperature, i'll tke it it is reading correctly then. So i've got my E200 FSB to 275Mhz, only 5 seconds into Prime95 Torture test, Core #1 reported hardware failure and the that test thread stopped, the other test thread on Core #2...
  30. B

    Speedfan 4.33

    Do i still need to offset +15C on each core? also do i have to run Prime95 for 24 hours? i oc'ed my E2200's 200Mhz FSB to 266Mhz, when running prime95 both core temp would shot up to 65C at times, would that be considered unstable?
  31. B

    Power supply recommendation

    55 - 60 amps? really? is it the FX chip that draws that much power?
  32. B

    Overclocking by tweaking the multiplier.

    and my understanding is if you are just doing modest oc, such as getting to 3Ghz, you don't even need to do that much with RAM, which means inexpensive value set would do, unless i'm mistaken...
  33. B

    Opensource Layer4 Switching

    I doubt a mere application running on the same Linux OS would work, a packet would still traverse through inbound TCP/IP stack, hit the supposed load balancing app, traverse another TCP/IP stack outbound, then hit one of the nodes in the clusters, the system sitting in front would then become...
  34. B

    Some quick E2200 + IP35-E results

    I didn't buy a new case, the old one has only a 80mm exhaust out take fan, given that and stock cooling and no upping vcore, what is the max i can get out of my E2200?
  35. B

    A Seemingly Silly Question about a Motherboard

    wasn't able to find much, except for this AMD board review that makes a generalization about nForce chipsets lock down AGP/PCI bus http://www.pcstats.com/article...?articleid=1594&page=3
  36. B

    thermal paste on Pentium Dual-Core E2200

    So i'm getting ready to put everything together, but i couldn't find separate thermal paste in the CPU box, i did find however on the underside of the heatsink, the side that attaches to the surface of the CPU, some "pad-looking" substance seemingly adhesive though solid to the touch, is that...
  37. B

    A Seemingly Silly Question about a Motherboard

    I have the same board, I think i saw somewhere that nForce chipsets automatically locks down the PCI/PCIe buses to its nominal ceilings.
  38. B

    Some quick E2200 + IP35-E results

    I have the same Allendale chip but my mobo is Gigabyte GA-73VM-S2, can i jump directly to 2.9-3.0Ghz, that is raise FSB direct from 200Mhz to 270Mhz, would that be safe?
  39. B

    Why sparc?

    I would like to add the T1/T2/T5120...etc are the low end entry level server models.
  40. B

    Why sparc?

    If you are simply talking about a typical workstation, then no, there isn't any advantage over a x86 system except for the fact that some niche apps are built for Sparc platform. Now if we are talking about a server, then Sparc scales much better than any x86 or x64 systems, AND CHEAPER.
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |