I have two 4GB kits with two sticks in each kit for a total of 8GB.
When I run two sticks (rows 1 & 3) the system is perfectly stable but when I fill all four slots the system becomes about as stable as Charles Manson.
Both kits work perfectly when used alone so I know I'm not dealing with a...
I have a DFI P35-T2RS running an E3110 @ 500x8 ... I have two banks filled with 2x2GB DDR2-100 memory. I have an identical 4GB kit that I'm thinking about installed but I'm not sure if I'll be forced to lower memory speed. I recall that back in the KT333 days you could only run your memory at...
I've tried putting a blob in the middle of the heat spreader and it doesn't always squish out evenly; as is clearly visible when you remove the heatsink and parts of it have no paste on it. I've tried the line and the cross method with the same results. I find the best way to do it is to cover...
So, I'm going to remove Vista from my dual-boot machine.
Here's how my dual-boot is setup. I simply installed Windows XP in one partition and then after that I installed Windows Vista Ultimate in a second partition. Once Vista was installed it saw XP in the other partition and automatically...
vDIMM is set to "Normal" in the BIOS and the options are to add voltage by +0.1v rather set the actual voltage e.g. 1.8, 1.9, 2.0 etc. These modules are rated at 2.2v and my previous Mushkin modules were rated at 1.8v! As best I can tell the P965 chipset supports up to PC2-6400 so it might not...
So, I just installed a set of Crucial Ballistix PC2-8500 modules and find that the system becomes unstable beyond a DRAM/FSB ratio of 2.66
The odd part about this is that this memory is rated for 1066MHz and with my FSB at 333 and the ratio at 2.66 the memory is only running at 886MHz; which...
In anticipation of the 45nm processors I flashed my 965P-DS3 rev. 3.3 to F13o
I was not able to test an E8400 with the board but was forced to go back to F11 as F13o would not allow me to push the FSB on my E4300 beyond 200MHz! Even 201MHz and it would become very unstable and hardly load...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.