Search results

X
e2200

im using the f4 bios, cpu voltage @ 1.136 fsb @ 200 x 11 multi memory @ 800 mhz running @ 1.8v +3.3v (ocz 8500 spec says to run @ 2.1v 5-5-5-15) pci-e @ 100 pci @ 33 everytime i try to push this rig it hangs also it wont accept the 2nd stick of ram
- xWilDx
- Post #4
- Feb 3, 2009
- Forum: CPUs and Overclocking
X
e2200

Hi im having problems with my pc ive just completed a new build and the only problems im having is to overclock it and for it to accept the 2nd ram module, here is my spec: psu: winpower 450w atx cpu: e2200 conroe dual core Mobo: ga ep45 ds3 version f9 bios ram:ocz pc8500 ddrII 1066 reaper...
- xWilDx
- Thread
- Jan 10, 2009
- Replies: 3
- Forum: CPUs and Overclocking
X
OCZ PC8500 DDRII 1066 2x1GB

ok here are some settings cpu-2200 l2 cache-1024 bus - 200 fsb 200 multiplier-11 volt 1.104v Ram- cas lat ras to cas ras to precharge tras 333 5 5 5 15 270 4 4 4...
- xWilDx
- Post #7
- Jan 6, 2009
- Forum: Memory and Storage
X
GA-EP35-DS3L as an OCing board.

can someone help me who has experience with the ga ep45 ds3bios updated to f9, im wanting to know how to push my e2200 from 2.200 to near 3.0 safely and also to allow my ocz reaper 2x1gb pc8500 ddrII 1066 ram to work with this....any suggestions,new to gigabyte boards :/
- xWilDx
- Post #31
- Jan 5, 2009
- Forum: CPUs and Overclocking
X
OCZ PC8500 DDRII 1066 2x1GB

Lol rebate? what for? sorry im new to this term rebate - refund? im british come on lol :)
- xWilDx
- Post #3
- Jan 5, 2009
- Forum: Memory and Storage
X
OCZ PC8500 DDRII 1066 2x1GB

Hi Im having problems getting my system to recognise 2GB of the ocz reaper pc8500 ddrII 1066, the settings suggest it to be set to 5-5-5-15 @ 2.1v, i tried a few settings to no avail system just crashes, updated the bios on the ga-ep45-ds3 from f3 to f9 version and still no improvement, ive...
- xWilDx
- Thread
- Jan 5, 2009
- Replies: 6
- Forum: Memory and Storage
X
GA-EP43-DS3 RAM slot issues

Can i just ask what type of power supply you are using?
- xWilDx
- Post #3
- Aug 27, 2008
- Forum: Motherboards
X
GA-EP43-DS3 RAM slot issues

hi there, im having the same issues with my new ga ep45 ds3 motherboard, constant ram faults.
- xWilDx
- Post #2
- Aug 27, 2008
- Forum: Motherboards
X
If I were to overclock

ok guys ive got my pc8500 1066m ddr2 the ocz reaper edition with this being a new build should i expect any errors with the ram?
- xWilDx
- Post #8
- Jul 31, 2008
- Forum: CPUs and Overclocking
X
If I were to overclock

ok this is my new build im putting together i have all the parts apart from the ram case: galaxy III ATX Form Factor 12" x 10.5" or smaller USB2.0 + AUDIO Dimensions :410(H) X200(W) X 480(D) mm Standard ATX 7 slots psu: OCZ600SXS-EU GameXtreme cpu: E2220DualCore 2x2.4GHz 800MHz 1Mb...
- xWilDx
- Post #2
- Jul 29, 2008
- Forum: CPUs and Overclocking
X
If I were to overclock

Hi to all, If i were to overclock the Intel Pentium Dual-Core E2200 2.2GHz 1M Cache S775 800MH to say 3.0hz what would i need using the ga - ep45 ds3 i have thought of using OCZ 2x1GB 240DIMM PC2-8500 Reaper 1066 memory but when overclocking would the fsb rise from 800? and does this effect the...
- xWilDx
- Thread
- Jul 29, 2008
- Replies: 10
- Forum: CPUs and Overclocking
X
Downloading speeds ?

No sorry i never tested while running a bit torrent because the computer hangs up and dies
- xWilDx
- Post #6
- Mar 4, 2008
- Forum: Networking
X
$3000 Challenge

Ok whats the cheapest you could build with good/high specs? buying parts from established retailers? as including keyboard/mouse ,speakers?
- xWilDx
- Post #18
- Mar 4, 2008
- Forum: Computer Building
X
Downloading speeds ?

This is where you lose me ^^ throttle ? bt program? how would one go about doing this? im a fast learner
- xWilDx
- Post #4
- Mar 4, 2008
- Forum: Networking
X
Which one would you get ?

Is there no ATI/AMD fans still out there? what about the x2 hd3870?
- xWilDx
- Post #12
- Mar 4, 2008
- Forum: Graphics Cards
X
what 3dmark score should I expect?

Hey my commodore 64 benchtests came back higher than 10k :shocked:
- xWilDx
- Post #11
- Mar 4, 2008
- Forum: Graphics Cards
X
X48 + ICH10R?

IT LOOKS LIKe I WILL BE HOLDING OUT FOR A FEW MORE MONTHS WITH MY NEW BUILD thanks to dfi and alike chopping and changing there minds on controllers and heating circulation system and such.........baaaaaah!
- xWilDx
- Post #8
- Mar 4, 2008
- Forum: Motherboards
X
Downloading speeds ?

done a speed test confirming upto 512kpbs and yet my router status confirms 576kpbs download stream and upload stream is 288kpbs
- xWilDx
- Post #2
- Mar 4, 2008
- Forum: Networking
X
Downloading speeds ?

Hi im running a network of 2 pc's 1 wired 1 wireless through a netgear dg834g V3 both are 10/100, i dont know much about this but im only getting 60kb/ps and upload speeds of 30kb/ps when using a torrent downloader,ive done internet speed tests coming back as 0.25mps yet im subscribed for 2-4mps...
- xWilDx
- Thread
- Mar 4, 2008
- Replies: 9
- Forum: Networking
X
$3000 Challenge

The mac daddy pimp =O, i take it most seem to like the quad q6600 cheap + o.c potential, and nearly all forums i visit seemingly most like the 8800gt, not too expensive yet good o.c , does that mean that most are nvidia fan's? How about the x2 hd3870 ?
- xWilDx
- Post #10
- Mar 3, 2008
- Forum: Computer Building
X
Killer NIC network Card

Well your right its not really woth the money so i'll invest it into noob school or better yet a nice graphics card, or a locking nut for my porsche 911 carrera
- xWilDx
- Post #20
- Mar 3, 2008
- Forum: Networking
X
Dfi's Juicey X48 Motherboard

You say this but yet your pc rig mentions you have 1 of these MoBo's? well this is something to keep in mind....i take it would be quite impossible to fit 4 x2 hd3870's in?
- xWilDx
- Post #13
- Mar 3, 2008
- Forum: Motherboards
X
Dfi's Juicey X48 Motherboard

That blurry bit has something to do with thermaltakes new heating system
- xWilDx
- Post #12
- Mar 3, 2008
- Forum: Motherboards
X
X38 MoBo Cooling

And hey WIRED "watch it or i'll punch the beak off
- xWilDx
- Post #17
- Mar 3, 2008
- Forum: Cases & Cooling
X
X38 MoBo Cooling

well i looked at that http://www.vr-zone.com/article...48-T3R_Board/5601.html and with it having solid japanese transistors and a powerful heat pipe cooler by thermaltakeshould solve the issue?
- xWilDx
- Post #16
- Mar 3, 2008
- Forum: Cases & Cooling
X
Help With An Old Build

i take it would not be worth buy new parts for as it wouldnt be worth doing up? or playing around with it and see how far i can fry it?
- xWilDx
- Post #7
- Mar 3, 2008
- Forum: CPUs and Overclocking
X
Help With An Old Build

so basically do a raffle for charity and hope someone wins it?
- xWilDx
- Post #6
- Mar 3, 2008
- Forum: CPUs and Overclocking
X
$3000 Challenge

Yes , this is of course to see what type of rig you could build with as many gadgets and accessories(spending every last nickel)
- xWilDx
- Post #7
- Mar 3, 2008
- Forum: Computer Building
X
FX5500

Ah thanks..i downloaded the driver, installed it and the graphic card is struggling/fan is always screaming at me at start ups i think this agp graphics card is a failure >.< that and its too damn loud in general use (puts earplugs in a night to get sleep) its the galaxy fx5500 i might...
- xWilDx
- Post #5
- Mar 2, 2008
- Forum: Computer Building
X
Help With An Old Build

:shocked:Hello to all, I have been given an old pc rig which isnt half bad i was wondering what to do with it? Here is the spec ive found on it upto now-> Psu: Compaq 220w-input-100-127/200-240v 6a/3a 50-60hz Output +5 +3 +12v 11a 15a 5a +12.8v...
- xWilDx
- Thread
- Mar 2, 2008
- Replies: 6
- Forum: CPUs and Overclocking
X
So now, we are starting to get a verdict on the Radeon-HD-3870 X2 and Crossfire in general

Thats the sweet spot of Xfire cards thats why i opted for the sapphire x2 hd3870 i even heard a rumour of the sapphire atomic water cooled x2 hd3870's as usual waiting on drivers will be an issue!
- xWilDx
- Post #12
- Mar 2, 2008
- Forum: Graphics Cards
X
HELP!

473ueruuerueruy
- xWilDx
- Post #31
- Mar 2, 2008
- Forum: Graphics Cards
X
HELP!

Well i dont mind your critisism, thats what a forum is for discussions ^^ I have done extensive research on alot of major brands(even posted latest tech stuff) I do favour some companies more than others so with that in mind i have choosen the sapphire x2 hd3870 1gb the reason for this is i can...
- xWilDx
- Post #30
- Mar 2, 2008
- Forum: Graphics Cards
X
CrossFire Power Supply!

After spending time researching lol! i have chosen the Ocz 750w silent which can be viewed here-->http://www.amazon.co.uk/OCZ-Si...r-Supply/dp/B000ZGSDEY it seems to get good reviews and is ample for a possible quad setup too of x2 hd3870's
- xWilDx
- Post #19
- Mar 2, 2008
- Forum: Power Supplies
X
X38 MoBo Cooling

Here is the list of the final components going into my rig: Case: Thermaltake Xaser VI(WC)VG4000BWS http://www.amazon.co.uk/Therma...&qid=1204478965&sr=1-1 PSU: Ocz's Quad silent 750w http://www.amazon.co.uk/OCZ-Si...r-Supply/dp/B000ZGSDEY MoBo: Dfi's X48-t3r fsb 1600 ddr3 Retails...
- xWilDx
- Post #14
- Mar 2, 2008
- Forum: Cases & Cooling
X
HELP!

check out the water cooled sapphire at fudzilla . com
- xWilDx
- Post #27
- Mar 2, 2008
- Forum: Graphics Cards
X
HELP!

:beer: I think i will choose this -> but thanks for your posts(nearly 30) http://www.fudzilla.com/index....view&id=5797&Itemid=40
- xWilDx
- Post #26
- Mar 2, 2008
- Forum: Graphics Cards
X
Dfi's Juicey X48 Motherboard

Someone is using there higher powers of admin to stop me posting whatever for?
- xWilDx
- Post #2
- Mar 2, 2008
- Forum: Motherboards
X
HELP!

I think ive choosen this new product http://forums.anandtech.com/me...=2158855&enterthread=y
- xWilDx
- Post #25
- Mar 2, 2008
- Forum: Graphics Cards
X
HELP!

Lol i dont need anyone to stick up for me but thanks anyhow im nearing 30
- xWilDx
- Post #24
- Mar 2, 2008
- Forum: Graphics Cards

RESOURCES

Top Bottom