ccc can't control fan speed once i hit 60*. flashing it does not help. I think it is time for a newegg return. Dang.
Anyone else have any info? HIS has not responded to me yet either.
I have the same card that just arrived (not sending in rebate yet in case they want the card back)
My card is nice and quiet until I play a game for 30+ seconds. Then she goes to 100% (or at least super loud) and doesn't come back down until 30 seconds of being out of the game. The air...
superheating <> super heated? I'll rephrase, The 4850's really really really hot core temps. ;) Either way, I don't see any other x1800 vs 4850 cooling threads, but it is cool. I can try to find somewhere else to post my results (or lack of). I am up for suggestions.
O come on, 2 months exactly and talking about modern video cards and cooling their super heated cores! :)
I didn't find the threat until to tonight or I would have posted sooner.
Crap, I just planned to do the same thing. Just got a broken x1800XT on ebay cheap ($10) and have $7 worth of heatsinks to hack apart for VRM and Ram cooling. I was planning on a $17 hack and slash cooling system that wasn't a 747 taking off in my case during gaming. I like quiet, so I...
Don't worry then. Ignore that big number and just watch your core temps. That is what I do with my 610i/7050 chipset motherboard, it has no CPU reading just cores.
Well everyone, my IP35-E died AGAIN! I think I am only allowed to have an awesome computer for 4 months in a row, or maybe only 10/12 months. I no longer get a post/video signal (again). I don't think this board was designed for a quad core or I just got a terrible board. It is even a 45nm...
So get this. No reply from them since the day before this post. Their phones DON'T even ring now. I can't sing up for their forums because I never received the confirmation email... This is not going well. I've been one month without my quad! (and I just got a xeon 3085 = E6850 in my...
I feel like my options are pretty poor. I feel like going to all gigabyte at this point.
Vote and/or post what you think.
My IP35-E died overnight about 3 weeks ago. I managed to get it to post once out of 25 tries and then gave up after 2 complete re-seatings and testing every other part...
E2160 (1.8GHz 1MB cache)
Stock 1.8Ghz @ 1.3X Volts and somewhere around 55-60* Celcius full load (prime 95 x 2).
U-Volt 2.1GHz @ 1.09V idle and 1.07V load, 44*C full load.
Speedstep and EIST on, but I can answer some of your questions.
Gigabyte boards do not seem to change voltages (when...
Haha yeah. I tried my regular generic stuff too.
Now I think it might be my new 4850 dying. I tried the 4850 in my ds3l (parent's build) and I get nothing on once output and a really messed up display on the other (dvi) output. I'm going to contact VisionTek today. I put the 9600gt back...
Yeah, it is sitting unplugged with battery out and the jumper on clear cmos. I think I'm going to give it another shot at lunch (5hrs of clear cmos, and mine usually cleared right away before). Having a GeminII sure is a pain when you need to move memory. I can't even add any memory without...
Completely dependent on BIOS support. I'm running an ICH9 board (now sorta dead... as of this morning - IP35-e) with a xeon 45nm quad (q9300 equiv.) and it worked fine once aBit had a bios for it. So as long as there is bios support it should work. Either way I'd give it a shot. There is...
So it was dead when I got up this morning as it was long beeping away. I pulled all the memory except one 512 and I get nothing now. No post now. The HD light stays solid through the whole start up (after the double boot of course). Once someone how after a reset/cmos I did manage to get to...
If I limit max CPUID in the bios (aka enable) I can't get any extra voltage to the cpu, thought it was C1E or EIST, but it wasn't either of them causing the low volts. Maybe I can get stable now with just a small cpu voltage increase!
I'm giving up on going higher. I have tried Vcore, nb...
Hmm interesting...!
I am at 3.075
1.21Vcore in Bios (1.07) 4 core loaded in windows
1.25 (I think, like 2-3 notches up) VTT
1.33 Northbridge too.
65% GTL REF (never went over 63 before... might be my problem)
2.2V ram (ballistix 1GBX2 + 512MBx2) = 3GB 4-4-4-12 (410MHz)
And I've been...
I'm into computers as you can see... I'm also in dual channel ;) 2x1gb + 2x 512MB.
I only have GTLREF in one spot. I think I'm already at 65% if not I'll try the next one up. I'm also not sure if it is NB or core that is the problem. I'm leaning toward needing more NB and better NB...
hmm I think without advanced knowledge of what is going on that would be hard to say. Mine runs like a top during the testing (they have low priority) and as soon as I turn them off all cores go to 0-1% use and my system responds flawlessly. Check your antivirus or another background process...
I'm struggling to get my x3320 stable @ 3.0+ I can run prime for 16 hours at 3.0 but even with some raised voltage I am only prime stable for an hour at 3.15. I'll have to read that guide and see if I can get higher as well.
Exactly! DDR 1gbx2 (pc3200) 2-3-2-6 Kingston + ASUS MB + 2 x 120gb sata hd's (can sell both and buy a new high speed 250gb 16mb cache for the price these 2 hd's will ebay for!) + an agp x800xl. I think I might be able to sneek about 250$ out of this stuff. Actually the $250 will pretty much...
Here is my list O stuff:
IP35-e
Xeon X3320 (like q9300)
3 GB DDR2-800 Crucial Ballistix
X-FI sound card
600Watt Ultra PSU
ASUS DVD Burner DL+- RW
DVD Rom
PNY 9600GT
Ultra Aluminus Black Full Tower Case
Cooler Master Gemin II CPU/MB Cooler
Floppy Drive
Seagate ST3250410AS (The very...
I have a x3320 and it says 1.25 max as well. I am running the (q9300 equiv.) x3320 @ 3.00GHz 1600fsb with 1.15V and 1.31 NB Voltage. Everything else normal volts or open timings etc for stability right now.
Sweet! Mine will have a Gemin II with two 120mm's (tricools) on low on it. So I was thinking 3.0 for general use and 3.5 for benchmarking and bragging! Who knows, might be 3.5 all the time! I love this forum.
No reply! That must be a good sign. I just won a NIB x3320 (q9300) on ebay for ... Drum roll... 198$ shipped (10% off ebay coupon ftw!) to replace my 5 week old M0 E2160 (now going into my parents build)! I can't wait to see 4 cores go at some video/sound encoding.
Id like to do some older game benches like oblivion too.
I tried to do the benchmark in the crysis demo but it kept telling me I wasn't pointing to the root folder. I'll have to try again. I really want to do some gaming resolution testing since (most) people use 1680x1050 for the average...
System:
MB: IP35-e
CPU: E2160(1.8) @ 3.00GHz & 1333FSB
Mem: 2x1GB & 2x512MB (3GB Total) Crucial Ballistix DDR2-800 @ 800MHz 4-4-4-12 (1.2 ratio for the test)
PSU: 600Watt Ultra
Other stuff not important for this!
Data charting done in Open Office.
UC = under clock since the 8800gs I...
Do the quad core xeon procs work in the ip35-e? I'm guessing they will since the ip35-e supports 45nm dual cores and other quads, but what about a 45nm quad xeon or 65nm quad xeon?
Wow, that is a really good idea. I might have to consider that. Thanks.
BTW I have an e2160 @3.00 at about 1.37vcore running nice and cool around 56*C loaded with my Gemin II (free after rebate) gigantic cooler! The best part is this board does let me run 3-3-3-9 on DDR2!
-Too bad the...
****Fixed**** Took it to a friends to try the cpu in their mb. Worked great. So I decided to try in my mb again and it worked! I think I had a monitor that didnt like the signal over a kvm. Something dumb anyway! Anyway thanks all and here are some numbers from a 15GB hard drive (old...
X800xl does not x800 pro does, neither work with their respective power (I also have the 12v plugged in above the pci-e slot, also tried without it, didn't matter) no post/video, no bios beeps.
I don't know if you missed my first post but I've tried two tested and working power supplies, one ultra (which works great in the other system I've had it in) and an antec (also worked great in another system) and I DON'T have memory in it since I don't get bios beeps but yes, I did try my...
Yes I have a bios beeping speaker connected ;)
I gave you all the specs you need. I don't even have the ide plugged in and nothing works. If I don't get bios beeps without memory or video when cpu/memory/v-card are plugged nothing else matters.
Im RMA'ing it Monday if no one figures...
update, took mb out of the case to a piece of wood after reseating the cpu. Now it starts, stops and then starts and stays running. I never get video (on either video card I have, two different x800's) and I NEVER get bios beeps, even with the v-card out. Bad mb?
Ok, first post for a problem with my new IP35-e. When I push the power button everything goes on for about 3-4 seconds and then it just shuts off, and 3 seconds later turns back on and repeats this cycle. I have let it do this 4 times before killing it (thought maybe this was double boot, but...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.