Search results

D
Is there a 2011 winner for N dual-band WiFi router?

I'd love to consider the Apple route but frankly, it's like religion. I just can't go that route. I guess I'll look at using the 3xxx line instead or in parallel with the 4xxx line.
- drunkgamer
- Post #9
- Jan 3, 2012
- Forum: Networking
D
Is there a 2011 winner for N dual-band WiFi router?

Thanks for the responses. @JackMDS - While I agree networking is not a sport, I do think you have "best in class" components - in every single category, almost always. For example I don't think many can argue that the DIR-655 for the first year or two was clearly a best-in-class wifi...
- drunkgamer
- Post #6
- Dec 30, 2011
- Forum: Networking
D
Is there a 2011 winner for N dual-band WiFi router?

Hi All, In looking back at the routers that have come out this past year, what would you say right now is a great, battle-tested, well-featured router? For me, router functionality comes first with WiFi functionality close behind. Also, I'm coming off using two DIR-655's which have been...
- drunkgamer
- Thread
- Dec 30, 2011
- Replies: 13
- Forum: Networking
D
Is there a "best" surge surpressor? (small field?)

Sweet baby dwarven Jesus. If this wasn't cut and paste, its an epic reply. Why couldn't someone like you answer my more important questions! :) P.S. I guess your telling me to get the Tripp Lite.
- drunkgamer
- Post #5
- Dec 16, 2011
- Forum: Peripherals & Components
D
Is there a "best" surge surpressor? (small field?)

Ok, I hate when people ask if there is a "best" anything because it's impossible to categorize what best means. So I'll try and specify: 1) I find very few mainstream surge supressors to begin with and Belkin seems to have somewhat cornered the market. 2) I simply what reliable...
- drunkgamer
- Thread
- Dec 16, 2011
- Replies: 7
- Forum: Peripherals & Components
D
CAT6: Bonded pair vs non-bonded pair?

Thanks for info. Sadly, I'm having trouble finding the Belden cable and don't want to pay more than I need to or to wait 4-6 weeks to get it. I'm considering going with Berk-Tek although I've never heard of them - though that means little as I'm a noob. Also, while there is nothing I can...
- drunkgamer
- Post #7
- Dec 5, 2011
- Forum: Networking
D
CAT6: Bonded pair vs non-bonded pair?

Heya Spidey, Thanks for the info. I can see why installers hate it (or could) because hey...who wants any job to take longer than it should (i.e. extra time to terminate bonded-pair)? But since this is for my house and for my own needs, I can take a little longer ;) As for why not...
- drunkgamer
- Post #3
- Dec 2, 2011
- Forum: Networking
D
CAT6: Bonded pair vs non-bonded pair?

Not sure if anyone here has experience - or at least knowledge and an opinion... I'm thinking of using Belden Bonded twisted pair CAT6 cable for a home installation. Their 7851A cable (bonded) is not that much more than their non-bonded cable of 4812. Here is a PDF on both cable as part...
- drunkgamer
- Thread
- Dec 2, 2011
- Replies: 6
- Forum: Networking
D
Quad-shield and power lines?

Thanks for info. I feel better now as its going to be a lot more work to try and avoid them in the garage. Two other Qs spring to mind: 1) What would be the symptoms of electrical interference on RG6 carrying source cable/internet data? How could I tell or measure? 2) I know most electrical...
- drunkgamer
- Post #3
- Nov 26, 2011
- Forum: Networking
D
Quad-shield and power lines?

I've read quite a few times that one should not run cat5/6 parallel to power lines if not at least 1 foot apart. How does this apply to RG6 that will be carrying in my cable internet from the street drop-off box? The previous owner never had the house wired with conduit from the street so...
- drunkgamer
- Thread
- Nov 26, 2011
- Replies: 3
- Forum: Networking
D
Simple rack mount system for a home possible?

Yes, it's mostly all for data comm. However, since I'm going this route - I'd like to have the option of some real rack-mounted devices. Potentially a slim server without a deep profile, etc. But yes I'm looking at both wall and 2 post racks now. I guess it's clear there are no 'popular'...
- drunkgamer
- Post #8
- Nov 25, 2011
- Forum: Networking
D
Simple rack mount system for a home possible?

Yeah I'm now starting to look at those as options too I guess. Any particular brand known for being good wall-mount rack units? Many also seem to be small (8U or 11U). I'm hoping to get closer to 20U although truthfully, I can have any shelf below to hold items that do not require a...
- drunkgamer
- Post #6
- Nov 25, 2011
- Forum: Networking
D
Simple rack mount system for a home possible?

Thanks for the advice. I did look at 4 post racks - and need to look some more - but the problem I have is that I only can go about 23" in depth as this is going into a normal residential wardrobe closet. It will mostly just contain a patch panel and a shelf with switch, router, modem...
- drunkgamer
- Post #4
- Nov 25, 2011
- Forum: Networking
D
Simple rack mount system for a home possible?

Hi guys, Happy Thanksgiving... Many thanks for the previous info on low voltage cabling! So I was about to get ready to start getting things going when I ran into a site called Smarthome. I was browsing around and started to think about using a small rack in my closet instead of the...
- drunkgamer
- Thread
- Nov 24, 2011
- Replies: 7
- Forum: Networking
D
Cat6 cable and hardware?

Thanks guys. I ordered the cable from Graybar and also all the hardware that I _know_ I need. One final "usage" question. I've seen people talk about using plates like this: http://www.amazon.com/Vanco-120624X-.../dp/B0016ZWRQ8 I'm guessing it helps when you have cable for like...
- drunkgamer
- Post #50
- Nov 21, 2011
- Forum: Networking
D
Cat6 cable and hardware?

BTW, I called Leviton and they said their Cat6 patch panel that is for their structured cable enclosures (plastic vs. metal for racks) uses the "A" wiring model and not "B". But it doesn't really matter since as long as both sides follow the same pattern, it's all the same. Thanks for the...
- drunkgamer
- Post #44
- Nov 18, 2011
- Forum: Networking
D
Cat6 cable and hardware?

I appreciate all the responses. I'll admit, I'm getting a bit lost with all this "code" stuff. I'm sure it's very valuable, especially for industry professionals in terms of best practices, etc... ...but for a layman like myself, do I need to read any of that or as long as I do the...
- drunkgamer
- Post #42
- Nov 18, 2011
- Forum: Networking
D
Cat6 cable and hardware?

Yeah, I didn't mean I was using a spade bit on drywall ;) I'm not THAT much of a noob. I mean some people suggest to cut a 3" or 4" hole with a holesaw and then put in a spade bit at an angle. The problem is that this angle isn't nearly as big (via the opening) as I'd hope. So basically...
- drunkgamer
- Post #33
- Nov 15, 2011
- Forum: Networking
D
Cat6 cable and hardware?

Yeah, the issue is that I need to go around two corner in the room (the attic is basically on the other side of the room so I'm going through the wall with the target keystone/plate, through the sloped ceiling, and into the other wall and then attic). So basically, I'll not be able to pull...
- drunkgamer
- Post #30
- Nov 15, 2011
- Forum: Networking
D
Cat6 cable and hardware?

Hey guys, I appreciate the debate as I like learning why people choose to use one approach over another. I'm fairly convinced neither approach is "right" or "wrong" but that there are many variables that give pro's and con's to each - and equally functional and non-functional. I'm torn as...
- drunkgamer
- Post #25
- Nov 15, 2011
- Forum: Networking
D
Cat6 cable and hardware?

Fair enough...and I do like the idea that once you do it right, you don't have to mess with it again. I bought a 42" Leviton panel enclosure cabinet. I keep reading their patch panels are not very robust. Do you know if I can use any other patch panel that would still fit in a structured...
- drunkgamer
- Post #10
- Nov 14, 2011
- Forum: Networking
D
Cat6 cable and hardware?

Heya adamantinepiggy, Thanks for the lengthy response. As for #1/#3 (is patch panel necessary?), what you say goes somewhat along the same lines of what I heard. A patch panel is nice, but unless you have a need to move connections around, there is more harm than potential benefit from...
- drunkgamer
- Post #8
- Nov 14, 2011
- Forum: Networking
D
Cat6 cable and hardware?

Thanks for the great feedback. Also, I read the sticky and all comments a couple times now (not sure how I missed it the first time around) and have a few questions: 1) Why is using a patch panel the "right" way? I've had a couple people via Angie's List come out to give estimates and all...
- drunkgamer
- Post #5
- Nov 13, 2011
- Forum: Networking
D
Cat6 cable and hardware?

Hi all, I asked a question before about a cabling project I was thinking of undertaking (and am now) but it deviated a bit - no thanks to me - towards installation vs what I actually need. So I wanted to ask real quickly...for running CAT6/6a and RG6 from a central closet to a few rooms...
- drunkgamer
- Thread
- Nov 12, 2011
- Replies: 50
- Forum: Networking
D
What cable types make sense for in-wall/attic house wiring?

Hmmm didn't think about that. So I tie a pull-down string to the end of the cable im pushing down so that if I need another I have an end sitting in the attic? I guess that makes sense for the runs where they do just drop down from the attic. The painful one in the bedroom (flat roof, no...
- drunkgamer
- Post #8
- Nov 8, 2011
- Forum: Networking
D
What cable types make sense for in-wall/attic house wiring?

Thanks guys for the responses! I'm sorry to have taken so long to respond but with a 5 month old...I'm happy I can still take a shower from time to time :/ So your points make me ask a few questions: 1) I was tempted to go with cat6a vs cat6 since why not future-proof - I don't plan on...
- drunkgamer
- Post #6
- Nov 7, 2011
- Forum: Networking
D
What cable types make sense for in-wall/attic house wiring?

Hi all, I'm debating trying to wire all the rooms of my house myself vs. hire someone to do it. I'm not as opposed to spending $$$ as I am worried about how bad the walls get ripped up to get the job done (portions of home have no attic or crawlspace). Part of my confusion is to what...
- drunkgamer
- Thread
- Nov 6, 2011
- Replies: 8
- Forum: Networking
D
Best modular computer desk?

Yeah, it IS expensive. It's supposed to be really good quality so while it's sparse/clean, it's industrial strength. I'd need to get another "table" of theirs with a bottom shelf where I'd put the printer, scanner, server, and NAS device. I do agree though that you'll have things like...
- drunkgamer
- Post #4
- Sep 29, 2011
- Forum: Computer Building
D
Best modular computer desk?

Hopefully this is the best place to post this. Ok, the concept of 'best' means different things to different people, but I'm in the market for a new computer desk. I spend a lot of time at mine (work, gaming, browsing, etc.) and ideally, I'd like out with an adjustable (in some form)...
- drunkgamer
- Thread
- Sep 29, 2011
- Replies: 4
- Forum: Computer Building
D
XFX Horror Story

XFX. Reading a bunch of bad experiences with their cards AND their customer service. Like someone else said, companies change. You either are growing/getting better or going in the opposite direction. No one stays the same. Seems like XFX has really gone downhill. I recently got a...
- drunkgamer
- Post #111
- Feb 8, 2010
- Forum: Graphics Cards
D
P8600 vs T9400 - How can I tell?

I am wanting to order a laptop (Montevino platform) but cannot decide between the T9400 and P8600. $$$ aside, I know the T9400 has twice the cache (6mb vs 3mb) but uses 10 more watts (35 to 25). It has a marginal increase in clock speed but that can almost be excluded. Does one run that...
- drunkgamer
- Thread
- Jan 2, 2009
- Replies: 1
- Forum: CPUs and Overclocking
D
HP DV5T or HDX16T Questions before buying...

Ok guys, I tried searching the many threads here for info, and although some of my questions were answered, even more were created and before I can click buy, can you please answer the following? Thanks! 1) Can you identify any performance/technical considerations other than screen resolution...
- drunkgamer
- Thread
- Jan 2, 2009
- Replies: 1
- Forum: Laptops
D
CFM rule of thumb?

Can you point me somewhere to read and learn more. I originally went with Zalman because all I heard (read) was Zalman Zalman and it has the most reviews and positive percentage of any cooler on Newegg (specially the 9700). So you cant argue with the numbers - if you are to believe them and...
- drunkgamer
- Post #17
- Apr 26, 2008
- Forum: Computer Building
D
CFM rule of thumb?

I'm learning that ain't the only thing brother. Here is a site that I love reading (waiting for my login to get approved so I can post on the darn forums) so I'm not trying to make fun of anything but this thread floored me: http://www.xtremesystems.org/f...d.php?t=173999&page=84 They are...
- drunkgamer
- Post #14
- Apr 25, 2008
- Forum: Computer Building
D
CFM rule of thumb?

Sorry, I didn't mean to imply you can't OC it because of course you can. But from reading some posts, it seems that since the proc is designed for 1333 and the bus is 1333, when you OC the proc, it strains the bus more since the bus can't go higher vs. using a board with 1600 potential...
- drunkgamer
- Post #12
- Apr 25, 2008
- Forum: Computer Building
D
CFM rule of thumb?

You know, I spent some time reading the installation guide for the Zalman 9700 just to know what to expect since this is my first time...and I didn't like what I read about the single clip that holds it in after feeling it's weight in Fry's. I never knew any of these upper-tier units were so...
- drunkgamer
- Post #11
- Apr 25, 2008
- Forum: Computer Building
D
CFM rule of thumb?

I am now starting to question the board as well. It came recommended to me from someone on Tom's Hardware. The board does have great reviews no matter where you look but...I just don't know how much of an OCer I'm going to be and that is a big advantage for that board. I think also having...
- drunkgamer
- Post #9
- Apr 25, 2008
- Forum: Computer Building
D
Need advice on X38/X48 and DDR3 combo please!

I started arguing with him about stuff again last night and told him he's on his own (in a nice way). Basically I got tired of convincing him of things he needs to DECIDE. Plus, this should be a fun process if you are doing it yourself (albeit a bit stressful and nervous for me as a first...
- drunkgamer
- Post #8
- Apr 25, 2008
- Forum: Computer Building
D
Need advice on X38/X48 and DDR3 combo please!

I tried telling him that. Thats why I'm going with the ASUS Rampage Forumula and DDR2 1000 PC-800 G.Skill 2x2gb. It should hold me well as I'm not a big OC'er so with E8500 and the rest, I hope I get good stability. I was going to go with a X38/DDR2 Gigabyte board (forgot the model, I...
- drunkgamer
- Post #3
- Apr 24, 2008
- Forum: Computer Building
D
CFM rule of thumb?

BTW, I am not trying to overthink or underthink (but I do analyze too much) but rather learn and understand. Well. Yes, the system I have in mind right now is: LATEST BUILD PROCESSOR: Intell E8500 ($290) http://www.newegg.com/Product/...x?Item=N82E16819115036 MOTHERBOARD: ASUS...
- drunkgamer
- Post #5
- Apr 24, 2008
- Forum: Computer Building

RESOURCES

Top Bottom