HSF fell off friends Athlon and fried it. Don't know if "dangling" hsf damaged mobo.
Visual inspection shows nothing.
Will BEEP CODES tell me if mobo ok, or even work at all if cpu not installed ?
Mobo is Luckystar K7VAT+
Thanks all for the replies.
It is a HP Vectra VLi8.
There is no option in the bios to enable/disable. And no option to boot AGP or PCI first.
Nor is there a jumper on mobo.
I finally found some banter on this subject on the HP IT boards. Though not mentioning my...
Yah. Its happened to me several times in Chicago in the past ten years. Only ones I remember was two
guys talking about some real estate deal and another was some woman yabbing at her hubby while he
was on the way home. No they couldn't hear me, luckily for that woman cause I repeatedly said...
Have onboard AGP graphics that cant cut it for gaming. (only 8 megs at 2x agp)
No bios setting or jumper to disable it.
No $ for new pc.
All I got is @ 100 bucks and an empty PCI slot.
P3 450 , 96 megs ram , Win98se
Can I disable AGP in harware profiles and install PCI video card ...
Hey, thanks man. I think your right about the Geforce 4 mx. I've been to HPs' site. I'll have to go back and see if I can find a jumper cause I know there is no bios setting to do it.
But even if there is no jumper can I not install a PCI vid card anyway and and somewhere designate it as the...
Of equal/greater importance to knowing what type/size vehicle you need and how much you can afford to spend (less is better imho) is to ask around until you find a good and trustworthy mechanic.
Whenever I need to buy used vehicles of any sort my mechanic checks it out from top to bottom for...
Not sure I understand the question/problem. I have two cdrw drives working in my rig. A Plextor and a Yamaha. ( one is on primary ide as master other is on secondary ide as master , three 40 gig hard drives, two of which reside in Dataport bays, are on primary and secondary of Promise ultra...
Can I do that? Have an HP Vectra vli8, P3 450, 96 megs ram, Win98se.
No way to disable or upgrade onboard AGP. Need answer please. A
PCI vid card Recommendation also appreciated. ($100 or less for games)
I'm trying to print a 43meg bitmap as tiled pages using Corel Photo Paint 6. I have win 98se, 256 megs ram, and over 39 gigs free on drive C. I get message saying not enough space on drive. Why can't i get this piggy to spool up and print. ?
I used to have the same problem with an old 2x Matsushita. What worked for me was to clean the lens over the laser (gently) with a cotton swab doped with white vinegar,fantastic, ammonia or alcohol. Had to do it @ every 6 mos. Then it crapped out completely. I don't know for sure but I...
:P
OK Fine ! I got it to work by shuffling cards in the PCI slots.
If everything was powered down before I did anything why did I have to
move stuff around to get it working ??????
Just powered everything down so I could take out my cards to move
my mobo outta the way temporarily. I just needed to get at 1 lousy screw to remove the feet on my tower an replace em with wheels.
Put everything back exactly as it was ( same slots etc.) Now get message "can not find pci...
What, of any significance, is the differance between the two series? :confused:
OOOPS, sorry, I just found the answers in a search. (I Dummy)
Is the 60 gxp really better ? Are there any bugs with it as in the 75gxp.
I just uploaded a completed stei wu. When screen says "getting data" an error message appears saying "File Not Found". What is the
problem ? Ive done hundreds of work units and never had this happen.
Dyngoe,
You must be correct about the "gateway" as that was the first thing the tech had me do.
Yep, the router is a Zyxel Prestige 314 (essentially the same as the Netgear RT314)
I have the drivers you are reffering to. (ver 5.3 disk one and two) I also have an...
Dyngoe,
Thanks for the info. In all the setup guides I have read, I never came across any mention of setting the "gateway" to the routers IP address. I'm gonna read them a 4th time just to see if I missed it.
The 3Com drivers I have were dowlnloaded from the very page...
I finally (after 2 mos.) found the time to set up my Zyxel P314.
I had to get help from a Zyxel tech. Over an hour on the phone and it
still wasn't working, and I even had all the info he needed at the ready. (I must say his patience amazed me) Poor guy must have just gotten tired and missed...
:confused: Wow! Thanks for all the info guys. I have saved this page for
reference. Now I can get on with my little home network. I can hardly wait to see what troubles my lack of knowledge will bring my way. :D
I have a Zyxel 314 router. I was about to install it when I noticed that the TCP/IP properties for my NIC shows a "specified" IP address of 192.168.1.10 / 255.255.255.0
The factory default IP address for the router is 192.168.1.1 / 255.255.255.0.
Does it matter if they both have...
I know that they are identical hardware wise. Currently the
Netgear is @ 129.00 and the Zyxel is @ 154.00. The only real diff.
tween them is software. Also the Zyxel includes a cat5 cable, a crossover cable, and a terminal cable. So value wise they are about the same.
I read that the...
The "driver" the Kenwood uses is just "standard" stuff from your os cd.
The latest "firmware" I have is 226g (I think).
www.kenwoodtech.com is where you need to go for any updates. Their web
site has been down for several days that I know of. I just got a...
I also have the Kenwood 72X. I have had no problems reading any cdr or cdrw made on my Plextor 12/10/32A. No problems ripping from cds direct to
my plex either.
jojo316 is right about the Creative 52x being a cheap pos. My buddy got one in a new pc he just bought and accidently bumped the tray...
If it's really grungy or if your just a clean freak, take EVERYTHING out
of case (including pwr supply)and place in bathtub or driveway. Use the
citrus stuff as Lord Evermore said ( simple green and fantastic work good too)and a brush and hose = brand new case. Same thing with monitor case if...
Best I ever did (or maybe worst:) was 135 on Kansas turnpike. Long stretch
of road flanked by flat cornfields, no ditches, no crossroads, and no one else on road to horizon front and rear. It was actually my "co pilots"
idea. So I went for it. What a DUMMY I was. It was a brand new 79...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.