Search results

  1. Skinnee Labs GPU Contest

    you get a virtual high-five. :) And ambient didn't really help much. :D

  2. Skinnee Labs GPU Contest

    Did you get the verification email and click the link? If so, we then get notified of the account for approval, which we usually approve it rather quickly once we're notified. edit: I updated the verbiage on the account screen to call this out a bit more.

  3. Skinnee Labs GPU Contest

    Yup, well currently in Cottage Grove. Was relocated to the Twin Cities from Grand Rapids, MI in 2004.

  4. Skinnee Labs GPU Contest

    Just a reminder, contest ends tonight @ 11:59:59PM Central... Get registered and get your entry in!

  5. Skinnee Labs GPU Contest

    Thanks for posting the contest Aigo! Make an account and guess the average temperature from the sensor pictured. International contest too. And to be clear, the prize is still sealed and has not been taken out of the box. :)

  6. Now it looks like I need a pump...

    Eric gave feedback to Koolance and the really listen to our feedback and typically implements on the next revision. We do the same for all parts we review, some companies listen, others don't.

  7. XSPC Rasa 750 RS360 kit

    I am really happy to see these kits are getting more people to consider and adventure into water cooling. In fact, due to their popularity and what seems to be easy implementation, we have decided to add water cooling kits to our test schedule for this year. So a big thanks to you in the...

  8. Project: Evangelene - SFF build with a Bite

    He is alive... quit trying to look busy at work and get this build done already!!!

  9. Project: Evangelene - SFF build with a Bite

    :colbert:

  10. Project: Evangelene - SFF build with a Bite

    I see my post achieved intent. :D

  11. Project: Evangelene - SFF build with a Bite

    progress?

  12. Forza 3 game night - part 2

    Is there another Skinnee lurking around here?

  13. Deciding on the Corsair H50

    If you're going to spend $70+ on either of the Noctua's... pay the couple bucks more and experiment with the H50. I was quite happy with the usability and performance of the H50 through testing (review coming very soon).

  14. Swiftech Apogee XT or Koolance CPU-360?

    Easier bleed, less potential for problems... the D5 is built like a tank!

  15. Swiftech Apogee XT or Koolance CPU-360?

    DDC vs. D5 is one of those never ending debates. Both have been taken from other intended uses and applied to water cooling. IMO, D5's are an easier starter pump and once you get more comfortable go with DDC's.

  16. Anyone ever get a bad batch of TIM?

    Yeah, I'm not liking MX-3 at all... bring back the MX-2 and 30g tubes at that!

  17. Indigo Xtreme Engineered Thermal Interface

    Vapor reviewed it... http://skinneelabs.com/indigoxtreme.html

  18. Anyone ever get a bad batch of TIM?

    I've been using MX-3 since MX-2 has pretty much disappeared from etailers. To me, MX-3 is completely different than MX-2... 3 seems to be oily like you're seeing and the consistency is completely different than I was used to. All four tubes I went through testing Air Coolers was the same. Some...

  19. Anybody try the dime trick with the Megahalems?

    Not true, some are bowed. And screw the corners, as long as you get good contact over the majority of the IHS you're all good. The Intel IHS's these days have more ups and downs than a Kardashian. :D

  20. Noctua NH-U12P SE2 Opinons?

    decreased, yeah "gain" may not have been the best term to use. :)

  21. Noctua NH-U12P SE2 Opinons?

    Just wrapping up my testing and the Noctua NH-U12P is included. There was roughly a gain of 2C with Push/Pull versus a single fan in Push. Mind you, I was running these coolers at a rather high OC (one of my mistakes for this round-up), results will vary. The fans are nice and quiet though.

  22. Any comments on the Thermalright Venomous X?

    I'm holding my comments about specific coolers at the moment as I still have some testing to complete before I am done for this round and review. What I will say goes towards every cooler I'm testing presently: Manufacturing tolerances and variance between two Titan Fenrirs, Megahalems...

  23. Thermalright Chill Factor 2

    One more thing to note... this is the only cooler thus far that has mount variation. I knew I opened my mouth too soon. :D

  24. Thermalright Chill Factor 2

    Yeah, I even tried the TRUE in the same mount. While the TIM print isn't as good with the TRUE's own mounting system its still better. With a set of calipers, the TRUE comes in at 15mm thickness and the VX at 14.78mm. I really think my situation is case of mount system and base thickness. This...

  25. Thermalright Chill Factor 2

    Well I'm not quite sure yet, but I am not getting the TIM print I expect nor the performance that I should be seeing. I do have my monocle and old english pipe at the ready for investigation though.

  26. Thermalright Chill Factor 2

    Thanks Ruby! I guess my initial hypothesis was wrong, back to figure out what is wrong with my VX.

  27. Thermalright Chill Factor 2

    Slightly OT here... On your VX, when you tighten the "pressure screw" down to all the way (70lb. pressure) does the hold down plate rise off the cooler base (ie: create a gap between the hold down plate and cooler base)?

  28. DIY Corsair H50 killer...?

    Yup, TIM print are like snowflakes. I don't know why the Air coolers aren't showing much variation, for the most part I'm getting less than a degree variation between mounts. I'm either one of the worlds most consistent cooler mounters, there are other thermal/mechanical factors in Air Coolers...

  29. DIY Corsair H50 killer...?

    I do agree with you Ruby, for waterblocks yes, but not for Air Coolers. Having been through almost 100 mounts on different air coolers the mount variation and result in temp difference is extremely small. I say extremly small only because I compare to the mount variation seen with waterblocks...

  30. How frequently do you guys purge/clean your WC set ups?

    Lets not forget the Thermochill never ending flux in the loop either. :twisted:

  31. P6T7 Under Water!

    ouch... remind me to stay out of threads where Ruby posts. :D

  32. QDC Help please?

    ahh... ok, thats easier then You have the male part right if you want the male to mount/screw into the block... but the female end you chose is 3/8" ID. 7/16" ID tube is larger than 3/8". You might have to go with the 1/2" barb end female part in order to use 7/16" tubing.

  33. QDC Help please?

    <cough> QDC Review </cough>

  34. P6T7 Under Water!

    Gillbot... get Ruby a hatchet quick!!!

  35. CoolIT ECO A.L.C Vs Corsair H50

    Yup, I don't plan on changing the setup and procedure I have. If so, that means a whole lot of retesting and that is never fun. I know (I've been following your threads on several different forums), many people want to see the head-to-head comparison... just a matter of time. I have to finish...

  36. CoolIT ECO A.L.C Vs Corsair H50

    I don't have the DH-14 in the current set of Air Coolers I'm testing, but I do have the Fenrir. I'll try to get the DH-14 in the next set of Air Coolers for testing.

  37. DIY Corsair H50 killer...?

    We'll know soon enough. :sneaky:

  38. Anyone use a CCF on their LGA1366 board?

    Pardon my stupidity, whats a CCF?

  39. best thermal paste?

    Couple of different methods discussed here...

  40. DIY Corsair H50 killer...?

    really?
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |