Well I just ripped everything apart and even reseated the cpu. Now it doesn't reboot loop but I don't get any picture on the screen nor do I get a post.
So last friday my computer just turned off out of the blue. After that it just spun the fans for a fraction of a second and then when i tried to hit the power on button again nothing happened.
After this i concluded that the PSU must have gone haywire so I went out and bought another one...
Exactly! No one really gives a crap if it is made in Asia, America or Europe as long as it is a good product and that is what Nokia has been releasing for a pretty long time.
Well I'm Icelandic and the thing about the fairies is actually true. My late grandfather saw them a lot when he was younger and I've heard few of the stories, although he knew countless. Like when he was young and was rounding up sheep in the mountains where he lived he used to see whole...
If they are 12oz cans then that is easy, think the most amount of beer ive consumed in one evening is about 12 18oz cans and that took roughly 4 hours.
Are we talking about 0.5L or 0.33L cans? If its the smaller ones then that's no problem, should also be able to do the other ones but it will take a bit longer because 6 liters of liquid is rather much.
I really think that the US is the only western country that this happens in. Here in Iceland religion is no issue, you just believe what you want to believe and people couldn't care less.
Ok I didn't read through the whole thread when I wrote this but for me it just feels like it is such an incredible failure of logical thinking to believe that there is an almighty being that controls everything that happens in this world. Especially when that being has not revealed its existence...
I have the same cooler with a 2500K and I can also move it a little bit to the sides like Hogan mentioned. My temps are around 33 idle and 60-64 at load when I'm running 4.8GHz 1.4V, so it's definitely seated correctly.
Ok so now i got through that screen and into windows using another HDD with installed Win7 but after running Win for about 30secs the same thing happens.. I have no idea what could be failing :/
Yes safe mode worked with out a problem, but my computer stopped turning on at all now so I suspect the PSU is dead. Also the Restart button and the Power button don't work after everything dies.
Edit: Tried using another PSU and get the same results, although it is only a 430W but I thought it...
So I left my computer on and went outside for about 10 minutes, when I came back the computer had shut off and wouldn't turn on again until I had reset the CMOS. After that it boots normally until it encounters the Welcome screen on Win7, right when its about to pass it everything stops working...
I'm getting a new monitor soon and the choice is between these 3:
24" -- BenQ G2420HDBE
25,5" -- http://www.newegg.com/Product/Produc...-047-_-Product
27" -- http://www.newegg.com/Product/Produc...-103-_-Product
Now my dilemma is if I should get the BenQ and keep my Acer Al2016W as...
Well ive almost decided to get a i5 750 and ASRock P55 Pro/USB3 ATX motherboard with 4GB of DDR3, but im wondering if you have any clue on how well this board overclocks?
So as I said in the title im running 2x 8800 GTX but im getting very bad results from 3dmark 06 and Vantage, only getting 11k on 06 and 13k on Vantage, Im using the 266.58 driver.
The system is E6320 @ 2.6GHz, 2GB DDR2 Ram and ASUS P5N-E SLI motherboard.
I'm guessing I'm just capped so...
I know I should be looking at SB but I live in Iceland and they are really expensive over here, core i5 2300 costs me $290 for example while the Phenom 955 is at $166 and the i3 540 is at $150, I wont really have that much money anywhere in the close future so im looking at the best bang for the...
I'm wondering about upgrading from my C2D E6320 thats OCed to 2.7GHz but im not sure whether I should get a Phenom 955 or the i3 540, all the benchmarks I've looked at show them as rather similar.
The system will mostly be used for playing games, surfing the net and watching movies.
Need...
I've been trying to overclock my cpu over 2.8GHz and have run into some trouble would be great if someone could help me out here :)
All info needed can be found here http://forums.guru3d.com/showthread.php?t=270464
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.