Search results

  1. G

    AMD HD 6850 Review/Benchmark [You were wrong if you thought I couldn't add more]

    To the OP: nice card, now try pushing it to its limits. I've had my Sapphire 6850 at 940/1180 stock voltages, I'm pretty sure yours can even pass it. Putting a bit of voltage won't hurt too. Hit the 1ghz mark core with a little added volts.
  2. G

    card update or total upgrade?

    Too outdated in the AMD motherboard naming scheme. But still, I'd go for a rebuild with an X6 1055T, OC the hell out of it, get a nice cheap AM3 board and just keep the GTX260. Davidh373's recommendation is good.
  3. G

    card update or total upgrade?

    Does the M2N Sli support phenom II X6? A 1055T overclocked would be a nice upgrade if ever.
  4. G

    Inadequate cooling from Freezer 7 Pro?

    This thing worries me, the hottest core reaches 70c on around 90~95% load while playing GTA IV. On video encoding which I do quite often, it even reaches highs of 75c. Is this still safe? If not, what's a good cooler priced below $40 that could reduce temps?
  5. G

    Inadequate cooling from Freezer 7 Pro?

    The fan speed is already set at its maximum (2500 rpm). Should I pull the trigger and get a new cooler? I was looking at the CM hyper 212 plus 'cause of the good reviews.
  6. G

    Inadequate cooling from Freezer 7 Pro?

    Here's the deal, checked with coretemp and my 3ghz Q6600 (1.325vid) is idling at temps ranging from low to high 40s depending on the core (being cooled by a Freezer 7) with ambient temps at around 32-34°C. Just yesterday I replaced the thermal paste with the noctua nt-h1 in the hopes of...
  7. G

    Question on laptop graphics

    I've only tried two games right now with the stock drivers that came with my Asus laptop. MW2 runs on max reso (1366x768) on low-mid settings on multiplayer (12-18 players) and can handle it fine. Dragon Age runs on max reso (better on 1280x720), mid settings w/o frame buffer effects and AA. I'm...
  8. G

    Question on laptop graphics

    Not too sure but the 310M would be on the same level as the mobility 4570. I agree with Soleron, the 4650 would really be twice the 310M since it is indeed twice as fast as the 4570. I should know because I have a mobility 4570. May I ask though what games you plan on playing on this laptop?
  9. G

    Asus K40AD Athlon II M300

    Sorry for not updating and thanks for your reply. Here's the case, the power scheme I've been using was the Power4Gear Hybrid which apparently is bugged. Switching between power schemes doesn't change clock settings even when the cpu is loaded. Solution was to just use the standard power schemes...
  10. G

    Asus K40AD Athlon II M300

    Hey guys, recently got an Asus K40AD with specs: Amd Athlon II x2 M300 (2.0ghz) Ati mobility radeon 4570 2x2gb ddr2-800 ram 320gb hdd Windows 7 64-bit pre-installed Been wondering which program correctly displays cpu frequency. CPU-z reports it at 800mhz (x4 multiplier) even during...
  11. G

    Video card going bad? Getting BSODs with Atikmdag.sys

    Had that same problem with the atikmdag.sys with my 4850 on a Windows Vista 64 OS. Reverted to XP SP3, same problems. Finally RMA'd the card and the replacement didn't have any such problems anymore. It seems like a hardware problem, something might be wrong with your video memory.
  12. G

    External Hard Disk detection problems.

    I have a 320gb Hitachi 2.5" HDD inside a Hard Disk Enclosure. The HDD is already formatted and ready to be used. The issue now is, whenever I plug in the HD Enclosure when the Computer is already on, the HD won't appear in My Computer. Then I tried plugging it while the computer is still off...
  13. G

    COD4 Weird FPS Dips

    Wow, even on the green side this happens huh? I have the same experience, this didn't used to happen before as well, then I remembered updating my drivers then this started happening! I can't be too sure though but theoretically, this shouldn't be happening since other 4850 owners playing COD4...
  14. G

    COD4 Weird FPS Dips

    Hey guys, I posted a while back regarding my problem about my COD4 FPS dropping to the 10s. Now, I think I found the solution after hours of tinkering with my settings. It seems that the texture resolution, normal map resolution, and specular map resolutions have something to do with it...
  15. G

    Restarting Computer when playing

    Increased the voltage by one notch and it doesn't hang up or restart anymore. I forgot that I had to increase the voltage when the overclock resetted. How stupid of me, thanks anyway!
  16. G

    Restarting Computer when playing

    Hey guys, thanks for the replies. Sorry, haven't reinstalled the game yet. And this also happens in CoD: WaW. Maybe I should try adjusting voltages by a bit and check again. Oh and I'm not sure about memory acceleration, my Mobo is a P5Q Vanilla, you guys have any idea if it has that?
  17. G

    Restarting Computer when playing

    Posted a while back about my restarting PC that got temporarily resolved by resetting drivers to 9.5. Now, whenever I play some COD4, it randomly restarts at any point of the game, sometimes after 30 minutes, totally random. I tried playing other games such as Anno 1404 which seems more...
  18. G

    Unstable 4850?

    Hey, thanks for the reply. Finally found the problem, Catalyst 9.7 Drivers! Reverted back to 9.5 and games like CoD4 and CoD:WaW run flawlessly again. Whew, for a moment there I thought I had to start buying new parts. Turns out a lot of folks have been having problems with these newer drivers...
  19. G

    Unstable 4850?

    Here's the deal, I've had this rig for a little more than a year now and it hasn't given me any problems so far. Lately, I've noticed whenever I play CoD4, sometimes the computer would just hang but won't restart. The screen would just freeze but no BSOD. Wondering now if maybe my 4850 has...
  20. G

    New Build with weird CPU issues

    I assume you haven't heard of speedstep yet. It downclocks the cpu by lowering the multiplier to x6. When it runs under load, multiplier goes up to x10. If you want to have it run at x10, just disable speedstep.
  21. G

    w00t! got my hd4830 to 800MHz!

    Thats quite an overclock you got there. I got my 4850 to 740/1150 but without any change in voltage, I feel it can still do more since I stopped at these settings. But nevertheless, these 4800 series chips can overclock like mad, get what you paid for and more.
  22. G

    New build - triple monitors!

    Awesome screenshots man. I wish I could get a triple monitor set-up as well but space is very limited. I've been wondering about how to go about it myself for quite some time now, but really I think the tripleheadtogo isn't really the best solution as well.
  23. G

    Suggestions for solid AGP card with DVI?

    The best you can get from AGP right now is a 3850, not sure if there's still 3870 AGPs. These things wouldn't do the resolution any justice, if you plan on playing new games, you won't be able to crank up the settings to high even.
  24. G

    Palit 4850 problem with RF Online

    Hey, I've been having a problem together with some other folks playing RF Online. Some may not know this since it's only popular in some parts of Asia and Brazil. Anyway, everytime I close the game client, there's like an 80% chance of my pc restarting. I'm running a Q6600 oc'ed 3ghz, prime95...
  25. G

    Can't overclock Q6600 beyond 3ghz

    Sorry, to clarify I tried running ram at 1:1 with 400fsb to test 3.2ghz which failed. I will try running 350fsb with ram at 1:1 without any voltage changes to see if ram could be causing the problem. Duvie, I do run prime95 small ffts to test my overclock beyond 3ghz and I noticed in the...
  26. G

    Can't overclock Q6600 beyond 3ghz

    Ram is running at 801mhz so its at the stock specifications. Btw, I also tried getting the chip to 3.1ghz (345x9) but its still unstable with the same settings as I have with 3ghz (333x9). I tried 1.4v just for 3.2ghz and it was able to boot up but prime95 made it restart in just around 15...
  27. G

    Can't overclock Q6600 beyond 3ghz

    I've been reading some other posts and it said I shouldn't get my NB up to 1.4v without active cooling. And to answer your question Duvie, I do have a VTT adjustment option, and my ram is running currently 400 with fsb at 333. I'm assuming the ram's still running at stock so I guess that isn't...
  28. G

    Can't overclock Q6600 beyond 3ghz

    I'm back guys, thanks for the replies. Tried raising NB voltages to 1.30v and even sb to 1.20v while upping core voltage to 1.35v. This is with 400x8 running ram at 1:1. Booted to Windows loading screen but restarted after choosing a profile. Me thinks this chip requires tons of volts just to...
  29. G

    Can't overclock Q6600 beyond 3ghz

    I've been running my Q6600 @ 3ghz for a few months already and it is rock stable tested already even with temps at around 37-40 idle and 60-65c 100% load temp. This may be cos of high ambient temps, I'm living in a tropical country. Now, I want to go beyond 3ghz but any adjustments with the...
  30. G

    Can an s939 X2 4800+ support BluRay playback?

    Those low profile cards of AMD would be cheaper than the Nvidia cards you are planning on getting. If you aren't going to use it for gaming then I suggest go with AMD instead, they'd be perfect for playback.
  31. G

    HD4850 or 9800gtx+

    I have a palit 4850 sonic and it can reach 740/2300 with its cooler stable, no volt mods necessary. I've heard that some were even able to get it to 770 core. But seriously, both your options are almost equally matched, just choose your personal preference. I'll be biased with the 4850 though.
  32. G

    Will I see performance drop going from e8400 to Q6600?

    The e8400 @ 3.6ghz should outperform that quad in most games which aren't optimized for quads. But if you play games with multi-core support like GTA IV, the Q6600 would do much better. as for the 1066fsb thing, the q6600 is a sandwich of 2 e6600 cores (correct me if I'm wrong) which ran on...
  33. G

    4850 driver problems

    Ok, I got back my pc and they replaced the card with the same make and model. It's working pretty flawless as of now. Tried farcry2, COH, call of duty 4, call of duty world of war, nba 2k9 and all run smooth. Praying nothing ever goes wrong.
  34. G

    4850 driver problems

    This is craptacular. I called the shop and they said they'll replace it with a HIS ICEQ 4850. Ill keep this thread updated.
  35. G

    4850 driver problems

    Tried Company of Heroes. VPU recovery pops up after a few seconds. I chose not to send error report, then after a few seconds, another VPU recovery error.
  36. G

    4850 driver problems

    Well, Call of Duty 4's the first game I've tried so far.
  37. G

    4850 driver problems

    bump
  38. G

    4850 driver problems

    Hey guys, My Palit 4850 sonic is causing some serious problems in 3D gaming such as Call of Duty 4. Everytime it will load the map, once the 3D starts appearing, it crashes and a window appears saying VPU recovery blablabla. The thing is, I've been asking around and there might be driver...
  39. G

    Problems with my 4850

    Oh sorry I wasn't able to check that anymore. Sent it out already, everyone ive talked to thinks its the vram. Had some memory dumping on the blue screen a while back.
  40. G

    Problems with my 4850

    Sent it already for RMA. Im really hoping my next one will be flawless.
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |