I'd like some help to figure out a way to increase the max voltage delivered to the IMC on this board im using a i5 750 currently at a wall at around 3.5 ghz. and im pretty sure its because of the 1.2 volt max IMC voltage.
Is it possible I can do a pencil mod to the IMC/VTT resistor if I can...
All you need to do is pull the power supply out and test it by shorting the green wire to ground its possible its not the power supply, also if it is true that it takes a proprietary emachines power supply you can get them on ebay for cheap.
You should just download OCCT it will give you all the temperatures, voltages, and allow you to stress test it, does this happen if you take the battery out and run it straight from the cord?
Looking for any wireless router. Will buy someone 10 dollar item on Amazon as small repayment off my Points 2 Shop account. I need one desperatey im tired of mooching off the neighbors connection.
dgf- The bios I modified is the P5B-Plus's bios. You just extract the cpu microcode (which is how it identifies the CPU)from the Commando bios which is essentially the same board they both use the same AMI bios which is modular. Nothings better than an AMI bios IMO, which is why I buy nothing...
Make sure you have the current bios from the ASUS site saved on your USB before trying to update just incase. Even if the bios doesnt work you are still able to use EZ-Flash, when I first modified my P5Q Turbo I messed up pretty bad cause I extracted one of the PCI roms wrong and it was hanging...
Once you extract the file then you'll see their both 1024KB. It should work since the only thing changed is the CPU Microcode and updated one of the PCI controller roms.
I've modified the bios for you, extracted the P6 Microcode which is what they patch to add new cpu's. The commando seems to have no problems with 45nm's.
The latest bios for the plus is so old and their all betas.
Just load up EZ flash and flash like normal. Let me know if it works ok...
According to this chart it supports both since 1102 bios. It says something about a chipset limitation but thats irrelevant sine the FSB would be well past that.
It may worrk if you mod it's bios using the commando's bios you extract the memory tables and p6 cpu microcode. Should be possible using MMTool I'll see what I can find.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.