Here is a little snippet for your case that you may need to set up
---------------->8---------------------
EXTERNAL_INTERFACE="eth0"
EXT_IP="your.ip.address"
WEB_SERVER=$EXT_IP #because you are going to forward the request later with ipmasqadm
ANYWHERE="any/0"
UNPRIVPORTS="1024:65535"...
So, your line would translate to:
/usr/sbin/ipmasqadm portfw -a -P tcp -L xxx.xxx.xxx.xxx 3450 -R 192.168.0.30 81
when you run your script.
That should run with no errors.
BTW, if you just run the exact line /usr/sbin/ipmasqadm portfw -a -P tcp -L $currentip 3450 -R 192.168.0.30 81 in CLI...
what is $currentip?
for me I would assume $currentip would be:
currentip=`ifconfig $ext_int | grep inet | cut -d : -f 2 | cut -d \ -f 1`
where $ext_int would be:
ext_int="eth0" (if I have a static ip), or
ext_int="ppp0" (if I have a dynamic ip using pppoe, or some sort of ppp connection)...
What did you write in the forwarding line?
I believe, that ipmasqadm does not manage network interfaces because ipchains already has the ability to manage them. ipmasqadm is a filter for paquets and can only handle IP addresses AFAIK. Someone may correct me if I am wrong.
Unfortunately...
OOOPS! I should have mentioned you had to install the forwarding utilitiy (ipmasqadm) in order to accomplish forwarding.
You should be able to find it for your particular distribution. It is pretty much a standard utility.
GL
Assuming you have port forwarding enabled (i.e. compiled the support and enabled it with echo 1 > /proc/sys/net/ipv4/ip_forward):
You first initialize forwarding (assuming your have flushed everything in the begining, i.e. /usr/sbin/ipchains -F):
#Make sure all port forwarding is denied, then...
Not necessarily. It just means that you probably have not compiled isapnp support with your kernel. But if you are absolutely sure your chipset is an ISA, then try compiling isapnp support in your kernel and see what it says when the kernel boots up.
Your PCI dump is exactly the same as...
I have the same laptop, with same chipsets. So I figure that if it works for me, then it should work for you too.
The reason it has 2 chipsets is because (if I remember correctly) IBM uses the 46xx chipset which controls more than just the sound (to put it in lame terms). They, themselves...
I will be assuming you have the the ALSA libraries, utilities and modules.
You need to install the libraries and utilites. Within the package you used to install, there should exist a system startup script which needs to be installed and then run to initialize the hardware (everytime you...
Who is providing your DHCP service? Your ISP? or do you have a router doing DHCP servicing? If you have a router, then you do not have it configured correctly. Check your DHCP options in it, and configure your DHCP server correctly. If you cannot figure out how to do it, want to rely on...
You need to edit your fstab under /etc. In order to let phillip mount the cdrom you need to have make sure phillip is part of the group users and then have the following line in your fstab:
/dev/cdrom /mnt/cdrom iso9660 noauto,ro,users 0 0
Why /mnt/cdrom? Because if...
Could you explain this? you mean with a GUI? or not?
?????? If you are trying to access the drive, why do you want it to unmount itself? Or do you mean pressing the eject button?
What do you mean? root is the only one that should own the /dos partition, if you try to change it using...
He should give us a sample format of the file containing the <Date>...</Date> tag just to make sure, because
What if he encounters two <Date>. . .</Date> tags on the same line?
ex.
.
.
.
<Host name=myhost port=777>
<Logger level="1" name="error_"><Home>"/var/log/hello"</Home>...
In Slackware you will not find the native NVidia drivers bundled with its distribution, but rather the drivers hacked by XFree86 upto some of the early NVidia TNT2 cards. Even if you used the ones provided by XFree86, you would not be able to take full advantage of your video card's hardware...
Have you ever considered joining a LUG in your area? Those guys can be of great help, and you can inteact, and get your questions answered personally. I bet you can even bring your system along if you let them know ahead of time. Just watchout for those who think are gurus and try to confuse...
What are you running it with? Are you using the startup script, or are you just running it from CLI?
Here is how you set it up (Assuming you installed the Slackware package that came with the distro):
1. su as user mysql (or log in as user mysql). It should already exist.
2. run the init...
Agreed. . . but this new ruling needs a better approach. . . It seems to work in some cases, but not in others, and that is a pretty good argument when anyone sees the replays . . . I wonder what FIFA is going to do about that, ' cause I am sure many teams have complained about the eyes on...
Good rule. But this one was doubtful. . . There was contact during the fall which says the defender was charging . . . At best it should have been a minor no call in favor of the S Koreans with no card . . .
/edit: Clarified
Agreed, but that should have been a no call. . . not a card because, like you said, there was contact. . .
Wrong. The hand hit him on the cheek near the back of the neck, but he ended up covering his nose. . . Contact there was, but Totti wanted a bit more. . .regardless there was contact...
The few that pop into my head
Turkey VS Brasil : What penalty? (made Turkey lose the game)
Croatil VS Italy : What offsides??? (took away two goals for the win)
Recently:
Belgium VS Brasil : What foul? (after Belgium scored)
Mexico VS US : Hello? Handball in the goalie area!!! (could have...
Sounds to me like you dozed off there for a bit. A yellow card count does not mean anything, but the actual visual action that was called was. . .
What is done is done. . .
It should get interesting now, now that this world cup has turned out very strange with all the bad calls that have...
On behalf of the Italians, I would like to thank FIFA for have such piece of crap refs in this world cup. They have ruined a perfectly great game for the Italians, and others as well . . .
Oh, well . . . Good Luck to S. Korea. . .
This is what I see on the second half:
1. S. Korea will begin to bring people forward to attack
2. Italy will just try to play like they did towards the end of the first half (more defensive)
3. S. Korea will push forward for an attack
4. S. Korea will lose the ball
5. Italy will rush an...
Agreed on the U.S. getting lucky. . . I had them 3rd (but more towards last) in the group finals, instead Portugal is the 3rd . . . wow, who would have thought . . . Well, the whole World Cup this year has been unpredictable, so who knows what is going to happen now. . .
U.S and S. Korea Advance. . . Next is:
U.S. vs. Mexico . . . Should be a good one, 'cause both play the same . . . when they want to ;)
S. Korea faces Italy in their next match. . . should be a good one. . . Hopefully Totti will wake up . . .
Luckily for them, S. Korea just scored on Portugal, so now they are back in as long as the scores hold. . .
Bad performance though . . . I am a bit disappointed that the U.S. does not know how to play offense . . .
Actually it was not, because a challenge without going for the ball in the goalies box is always called. . . he was smaller than the defender and that is what gave it away too. . . If he would have jumped at the same time and scored, then it would have been a questionable call. . .
Unfortunate...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.