Epinions has a few revies of the 4210. It seems that the sound quality and range are not the best, but its expandability and features make it attractive.
_ben
I have a combination of SCSI and IDE. The problem I ran into is running out of IRQs. Even though windows has IRQ sharing some devices just don't want to share, ie. my video capture card and my Hollywood Plus DVD decoder. I had to free up some IRQs by disabling anything that I didn't need, so...
Do you set your IP, DNS, Gateway etc or is it assigned by DHCP? The reason I ask is that I had the same problem once and it turned out that more than one computer was using the same IP. Like your situation things would be working fine. I could surf, I could check email and then all of the...
You mentioned you tried 4 different drives and flipped the cable around, but have you tried other floppy cables? You probaly already did this, but it is simple enough to overlook.
-Ben
Hello Everyone,
I have a lot of old SIMMs hanging around, and I don't remember if they are EDO or FP let alone the size of each of them. Is there a site that has a listing of the chip part numbers so I can identify them.
Thanks
Ben
Hi Guys,
I have a HP 7500 CD-RW and I can't get any software to recognize the drive. When i install Adaptec EZ CD it tells me that it cannot find a suitable IDE channel. I can read CD's from it but I can write. Here are my computer specs
Athlon 700
256MB RAM
Soyo SY-K7VIA Mobo
20 GB Quantum...
Hi Guys,
I have a HP 7500 CD-RW and I can't get any software to recognize the drive. When i install Adaptec EZ CD it tells me that it cannot find a suitable IDE channel. I can read CD's from it but I can write. Here are my computer specs
Athlon 700
256MB RAM
Soyo SY-K7VIA Mobo
20 GB Quantum...
I have purchased three refurb monitors to date (one 17" Sony 200ES and two 15" Sony 100ES) and I have had problems. One of my 15" crapped out after the warranty period, but less than a year. The 17" buttons are falling off, but otherwise it is working really well. I guess...
Hello Everyone,
I just picked up a classic Athlon 700 and I was wondering if I need to purchase a cooling solution. I don't plan on overclocking. So is the stock black casing sufficient?
Ben
The explorer adds a couple of programmable buttons on the thumb side (right hand). I have one of both and I really like the explorer, but my girlfriend's hand don't fit it too well (small hands).
Ben
I'm sure there are a lot of places you can look on the web, but my favorite is Motely Fool. They have a lot of information and you there's a forum there too.
Ben
This may sound trivial but reseat the components....maybe connections are being made...reseat the cpu, put the ram in another slot, and reseat the video card.
Hope this works,
Ben
<< By accepting this free long distance, you are agreeing to receive subsequent email offers through Gotitdirect.com >>
You might want to think about using a hotmail address......
I haven't used this particular keyboard, but I have used several other infared keyboards and they are such a pain. Any little thing that gets in the way will screw up transfers. I have since boutgh the logitech RF keyboard and it works great.
Hope this helps,
Ben
I'm looking to buy a digital camera and I was wondering if any of you have some suggestions. I want something mid to high range. I am willing to spend ~800 on the camera and ~300 more on accessories.
Thanks,
Ben
I've had this printer for about a year and it is great. PC Mag had it as the best printer of the year in 1998 (if you care about that sort of thing). Here is their review:
http://www.zdnet.com/pcmag/special/bestof98/periph5.html
I have had it spit out a couple of sheet together a couple of...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.