Search results

T
Can you attach a router to a switch?

I see, thank you for your help, it's been greatly appreciated :) I've also added the pictures to the previous post, I guess they were stored in my browsers cache and I was the only one able to see them :)
- tihifnis
- Post #13
- Aug 27, 2014
- Forum: Networking
T
Can you attach a router to a switch?

I see :) Hm...I need some help with how the setup would look like, if indeed it is possible with a switch. I take it you mean this setup will work then :) https://www.dropbox.com/s/pjj1nj8quhzryir/setup-2.jpg?dl=0 1) That way I've got a hardware firewall like azazel1024 mentions 2) I've only...
- tihifnis
- Post #11
- Aug 26, 2014
- Forum: Networking
T
Can you attach a router to a switch?

Ah, good point about the firewall! :) Well my router is fine-ish for now, I can get 45mbit/70mbit vs 98/99mbit without it, but if I open utorrent it completely crumbles. I can barely access the management page, surfing is like with a 56k modem and I can only download through utorrent with...
- tihifnis
- Post #9
- Aug 26, 2014
- Forum: Networking
T
Can you attach a router to a switch?

Thanks VirtualLarry, I can see what you mean about only getting one IP. Guess I'll need to buy an expensive router then :(
- tihifnis
- Post #5
- Aug 26, 2014
- Forum: Networking
T
Can you attach a router to a switch?

Hi there, I have 100/100mbit internet from an RJ45 socket in the wall. If I take an Ethernet cable and plug it into my PC, I can download with almost full speed which is great, but I miss having wifi for my laptop and smartphone. I found my old netgear router and while I now have wifi too...
- tihifnis
- Thread
- Aug 26, 2014
- Replies: 14
- Forum: Networking
T
Is the PCI-E 6+2 connector safe too?

I see, thank you very much =)
- tihifnis
- Post #3
- Jan 12, 2011
- Forum: Graphics Cards
T
Is the PCI-E 6+2 connector safe too?

Hi, I just upgraded from a HD4830 card to an Nvidia 460 GTX. This card however, requires 2x PCI-E power connecters. My PSU (Sea sonic SR2 500 watt) only has 1 PCI-E 6 pins and 1 PCI-E 6+2 pins connector. My worries is whether it's a good idea to use it to power the card. The card came with a...
- tihifnis
- Thread
- Jan 12, 2011
- Replies: 2
- Forum: Graphics Cards
T
Statistics help :(

Ah ok, I well remove the pictures then :) Mark R, according to your last equation the answer is 0.019, but when I take the 2.344 and look in my Z table, I get 2.344 = 0.4905. I then say 0,5 minus 0,4905 and I get the answer 0.0095. But since the deviation is on both sides of Z, I just multiply...
- tihifnis
- Post #20
- Dec 13, 2010
- Forum: OT Discussion Club
T
Statistics help :(

edited
- tihifnis
- Post #14
- Dec 9, 2010
- Forum: OT Discussion Club
T
Statistics help :(

Wow..thank you very much! I can't quite figure it out yet so have to go through it a couple of times, but I'm so grateful that I have an answer now :)
- tihifnis
- Post #13
- Dec 1, 2010
- Forum: OT Discussion Club
T
Statistics help :(

Hi again, I tried to help someone explaining this but instead I made an ass out of myself :( I couldn't answer why the two parts aren't identical, and I honestly didn't spot it myself. Can someone enlighten me on this? E[X^2] - (E[X])^2 Why is it X^2 in the first, and [X] in the second...
- tihifnis
- Post #11
- Dec 1, 2010
- Forum: OT Discussion Club
T
Statistics help :(

Ok I see, thank you everyone for helping me out :)
- tihifnis
- Post #10
- Nov 23, 2010
- Forum: OT Discussion Club
T
Statistics help :(

Hm..I can you see that you say ^2 before you minus the mean, but can you mathematically do that? My statistics book says it is the other way around. I tried your example this way and it gave me a slightly different result. .475*3 + .263*1 + 0 = 1.425 0.263 and 0. Then I minus the mean...
- tihifnis
- Post #5
- Nov 23, 2010
- Forum: OT Discussion Club
T
Statistics help :(

Hello again =) I have yet another question but I thought I would keep it in the same thread. Question: A quality-control analyst wants to estimate the proportion of imperfect jeans in a large warehouse. The analyst plans to select a random sample of 500 pairs of jeans and note the proportion of...
- tihifnis
- Thread
- Nov 23, 2010
- Replies: 19
- Forum: OT Discussion Club
T
ATI + LCD @ 120hz causes jittering/distortion problem

It's still not fixed with 10.2 but as written above, 120hz is available in all resolutions now. I'm still using rivatuner to fix the distortion problem.
- tihifnis
- Post #109
- Mar 6, 2010
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

Through the OSD :)
- tihifnis
- Post #94
- Jan 13, 2010
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

I've found a working fix for it now! \o/ Long story short.. Download rivatuner http://downloads.guru3d.com/downloadget.php?id=163&file=4&evp=2d213e528fb556c354432a3976bff55a Open Rivatuner. Click on the right triangle icon located beside the card information. Mine says something like...
- tihifnis
- Post #87
- Jan 4, 2010
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

This is taking the thread the wrong way guys. Bottom line is this. It's 120hz without the 3D glasses that works with vidia software. It might be 60hz with the glasses, I don't know and I don't care. It's not some weak solution or interpolated image. It's true 120hz. You can read it in every...
- tihifnis
- Post #85
- Jan 4, 2010
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

I've been digging some myself now, and I don't understand ATI/Dave's think it's been fixed. As I still can see several posts on AMD's forum regarding 120hz problems. This is just one of the posts...
- tihifnis
- Post #69
- Jan 3, 2010
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

Isn't there a HD5000 and HD4000 user that can verify whether there problems are fixed with 9.12?
- tihifnis
- Post #68
- Jan 3, 2010
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

Hm..according to Dave it's been fixed. But I wonder whether he only means the HD5000 cards. Can someone with a HD5000 card verify that there are no more problems?
- tihifnis
- Post #65
- Jan 2, 2010
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

Posed on Beyond3d now..I hope Dave Baumann might be able to shed some light on any progress. http://forum.beyond3d.com/showthread.php?p=1373896#post1373896
- tihifnis
- Post #63
- Jan 2, 2010
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

I have just tried the official drivers, but it still doesn't work. Nothing has been fixed, and it's not even recognized as a known problem in the driver change logs. It's so ridiculous. Nvidia users have had the frequencies 60, 75, 85, 100, 110 and 120hz in ALL resolutions since the screen was...
- tihifnis
- Post #49
- Dec 18, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

Yes, that was the very first thing I tried. I tried both with rivatuner and CCC. I found some old threads on ATI forum which describe the exact same problem. The thread goes back to 2008 and is regarding the HD4870 card and blinking problems. If you read it through, you can see it's the same...
- tihifnis
- Post #44
- Oct 27, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

I had no luck with it. I've also tried the 9.11 beta but it's sadly the same :(
- tihifnis
- Post #41
- Oct 26, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

That sounds great. I hope they'll be able to fix it with the 9.10 version. I'm just a bit worried about his reply regarding the 4000 cards :l
- tihifnis
- Post #33
- Oct 3, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

Well, I found a guy with a Sapphire HD4670 and he has no problems. "I'm on win7 RTM x64, Catalyst 9.3. I tried Catalyst 9.9, but the only difference I'm noticing there is that there were options like scaling added to the menus which don't work. Therefore I downgraded to 9.3. On native...
- tihifnis
- Post #29
- Oct 1, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

See the main update, don't have it working quite yet :) I've submitted what I've found to ATI, so hopefully they'll be able to fix it soon. It's like praying to Santa for a Victoria Secrets model though, so the more people to submit the problem, the bigger our chances of getting a fix gets.
- tihifnis
- Post #27
- Oct 1, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

That's very kind of you, but I'm from the old world....you would have to ship it all the way over the Atlantic ocean :)
- tihifnis
- Post #26
- Oct 1, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

It's weird we only get 120hz in native resolution, since the nvidia users get it in all.
- tihifnis
- Post #24
- Oct 1, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

It's right here :) http://www.entechtaiwan.com/files/moninfo.exe Hehe, no it doesn't work like that. The newer driver versions add support for newer cards, bug fixes, added functionality, performance fixes and so on. For instance, the 9.9 version added/changed the following bug fixes and...
- tihifnis
- Post #23
- Oct 1, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

Ok, I want to find out what the problem is. Could all of you that have a working system with a Samsung 2233RZ please post the following: Brand and model and manufacturer of the card O/S and whether it's 32 or 64bit Version of Catalyst driver. Do you only have 120hz in the native...
- tihifnis
- Post #20
- Oct 1, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

What Cat are you using? And what OS? Perhaps the issue is entirely OS and Catalyst dependant though I doubt it.
- tihifnis
- Post #19
- Oct 1, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

I just got a reply from Samsung, that claims it's an ATI driver problem. Incredible that they still haven't been able to fix it.
- tihifnis
- Post #17
- Oct 1, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

Another one with 2233RZ and ATI problems. As soon as he uses an Nvidia Card, it works perfectly. http://www.rage3d.com/BOARD/showthread.php?t=33950739
- tihifnis
- Post #16
- Oct 1, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

I completely forgot to ask, but what brand is your ATI card? Edit: Nevermind, I just saw it now :) Sapphire just like me.
- tihifnis
- Post #12
- Oct 1, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

I just got the best reply from Sapphire.
- tihifnis
- Post #11
- Oct 1, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

Sorry about the large youtube videos, didn't see it was fullscreen but I fixed it now =) "Glad" do see I'm not alone with the problem. What a poor reply by Samsung by the way. Even though I don't think they are to blame, they should still be more interested in trouble shooting. I hope we can...
- tihifnis
- Post #6
- Sep 30, 2009
- Forum: Displays
T
ATI + LCD @ 120hz causes jittering/distortion problem

Edit 3: I know what the problem is now, but I'll leave the original text, in case other users can benefit from it. I have also tried a variety of fixes, before I found out that the problem was ATI's drivers. To summarize: Nvidia users have no problems. They have no distortion and they can use...
- tihifnis
- Thread
- Sep 30, 2009
- Replies: 134
- Forum: Displays

RESOURCES

Top Bottom