Search results

  1. A

    Help me out. I need a case brand name.

    I have an IN-WIN which I think will allow that. I think it was a "500a" model. It's also a large case, if you don't need a large case, you might be able to buy 2 mid-tower cases for the same price.
  2. A

    running linux on my 486, which distro and can I do it??

    I think you'll find that Mandrake is for Pentiums and higher. There was a special version released for 386/486, but I don't think the latest is. It was a special 7.0 release I think. I very much like Mandrake and do recommend it, but only for the newer systems. I think a lot of the newer...
  3. A

    What do the "week x" things meen?

    It's coded on the chip as to what week it was made. People have found that certain weeks seem to overclock better than others. For Athons, that seems to be weeks 7,8,9 of this year so far. Myself, I have a week 7 Athlon 1Gig that's doing 1.4Gigs now, and I haven't even tested the limit yet.
  4. A

    10.0 x 133mhz = 1.33Ghz ...possible?

    I picked up an Asus A7V133 (rev 1.05!) last night, along with an Athlon-B 1 Ghz chip. It's a AXIA coded Week 7 chip. I quickly had it running at 10X multiplier on the 133Mhz FSB. That gave me the 1330Mhz that you're asking about. Actually, I had 1343Mhz as my FSB ended up slightly above...
  5. A

    Wow, never seen this one here! 1GHz TBird at 1.5GHz!

    No recommendation of a B vs a C chip? This is in reference to my difficulty in locating a C chip and the ease in which I can get a B chip. See above. Thanks.
  6. A

    Wow, never seen this one here! 1GHz TBird at 1.5GHz!

    Thanks for the reference to the article on the AXIA code. Unless you have an overclocking friendly store, it's likely pretty difficult to sort through their collection of chips (all the stores around here keep them in a backroom/safe) though. And trying to explain to them why you want a...
  7. A

    Wow, never seen this one here! 1GHz TBird at 1.5GHz!

    HI, What does the AXIA code mean? And why doesn't it appear on 1Ghz CPU's normally? I'm having a hard time getting a C chip in town, but the B's are available. Should I hold out for the C, or just go for the B? I'm looking for a 1Ghz chip, which I hope to overclock to at least 1.2Ghz (and...
  8. A

    How can I use an old system with Linux for a cable modem router?

    If you want to make a real easy gateway/firewall, check out www.coyotelinux.com. In a few minutes you'll have a single floppy that you can use for this. No hard drive required. It's quieter, cheaper, cooler, etc. There's a few other ones like this too, I just happen to use this one on an...
  9. A

    How to get Mandrake 7.2 to access my lan?

    Is your Mandrake install able to ping the Window's box? Is the interface up? 'ifconfig -a' will show you the settings and status of the ethernet card. Yes, Mandrake can be a gateway. Looks like you've got some basic debugging to do and that there's no quick answers here. Go and check...
  10. A

    Is it worth it to pick up Mandrake 7.2 if I already have 7?

    Ya, or download it. I found the 7.2 a lot nicer to work with than the previous ones. Of course the next release should not be far away either, so you may want to wait.
  11. A

    HELP: I can't get my ethernet card to work in Red Hat 7

    I ran in to a problem with these the other day. Seems like there is a new version of them that is a 905c or something like that. The standard RH 6.2 (don't know about 7.0) distro installs the wrong driver by default. As suggested here, you need to set the /etc/conf.modules to the correct...
  12. A

    Can i somehow make a bootable cdrom this way?

    Why don't you try fixing the original CD? People have had some success with repair kits or even the Brasso metal polish. Look around for further info. There was a web site that compared a number of products recently and showed the results. Unfortunately, I can't remember who it was.
  13. A

    The Best Linux?

    HI, Personally, I've like Mandrake. It's worked well for me. I just downloaded the Redhat 7.1 beta though and I'm about to try it. Remember that you can also download these distros, so if you have the bandwidth and a CD Burner (you can also do a net-install, but I prefer to have the CDs)...
  14. A

    How do I install IrDA functions on my desktop?

    HI, I recently installed one on an Asus A7V motherboard. I think it is the ASUS IR device. I'm using it with the Palm Vx and it's working just fine. One really big thing to watch out for. Make sure that you have a place to install it (a case window) and that it's at a reasonable place...
  15. A

    Please clarify: Can pc133 RAM be used as pc100?

    HI, I've got a friend with a K6-2 500 on a P5A with a mixture of PC100 and PC133 RAM totalling 196 Megs. I think it's one stick of 64M of PC100 and 2 of 64M of PC133. Seems to be working just fine for him.
  16. A

    Any way to recover corrupted CDRW data?

    HI, I don't know if this will help you or not, but my HP drive came with a package called "CD Diagnose". It has a bunch of advance things like: "Recover Track" which tries to recover the last track on a CD if it was damaged. It will let you close sessions/tracks. Have a...
  17. A

    Do you like your trackball better than a mouse?

    I have a Logitech Trackman Marble from a few years back. I used it exclusively for the first year or so. It was great for normal desktop stuff, but I didn't find it worked well with games like Diablo. I switched to a Mouseman+ and I've been using it now for about 1.5 or 2 years. The...
  18. A

    AIW Radeon

    Go check out the forums and documents over at www.rage3d.com. There's lots of help there, and lots of discussion on what order to install things to make sure it all works. My AIW is working pretty well.
  19. A

    Photoshop, PaintShop Pro, or Another...?

    You may want to look in to some of the photo specific software. I tried out paintshop Pro and it is a really great package, but I found that for what I needed, PhotoSuite from MGI did the job for 1/3 the price.
  20. A

    Do AMD motherboards work well with video capture and TV cards(and other questions about AMD stuff)?

    HI, I have an Asus A7V with a Duron 650 running at 800Mhz. About a week ago I bought an ATI AIW Radeon. The system seems to be working quite well.
  21. A

    Overclocking or upgrading a Compaq 7800 laptop

    Hello, I've got a Compaq Armada 7800 laptop here with a PII 266Mhz CPU. I know they sold these with up to a 400Mhz CPU. Can anybody give me some advise on either overclocking what I have (I've done this lots on a standard PC, but never a laptop), or whether I can upgrade the CPU from 266 to...
  22. A

    upgrade cpu/overclock a Compaq laptop

    Hello, I've got a Compaq Armada 7800 laptop here with a PII 266Mhz CPU. I know they sold these with up to a 400Mhz CPU. Can anybody give me some advise on either overclocking what I have (I've done this lots on a standard PC, but never a laptop), or whether I can upgrade the CPU from 266...
  23. A

    Which Linux to use...

    HI, I'll jump in and say Mandrake as well. The 7.2 Final release just came out this weekend. It's on the mirrors, but the main web site hasn't said anything yet. I just finished installing it from ISOs and this is one of the first sites I've gone to (after Mandrake's then slashdot). I've...
  24. A

    How to clean my new monitor.

    Water. Seriously, a clean damp cloth and a bit of elbow grease (don't get it on the monitor) should help quite a bit and not risk your monitor.
  25. A

    Where can I get a P2T Thermal Probe for my Asus K7M? (I live in Canda)

    I think DealsDirect has what you want for $10. Check out this page: http://www.dealsdirect.com/catalog/mall.cfm?CATEGORY=82 They are an Ottawa area store and I've bought from them locally. I haven't tried their shipping service.
  26. A

    Has anyone tried the new Force Feedback 2?

    HI, I posted the following back on September 23rd about my bad experiences with these joysticks not working: http://forums.anandtech.com/messageview.cfm?catid=27&threadid=239126
  27. A

    Poll: Does anybody use ReWrite, with their burners?

    I currently have a 4x2x24 burner and find that CDRW is too slow for general use. I do use it sometimes, like when providing downloads from the Internet to my dad that only has a 33K connection. I am planning on buying the plextor 12x10x32 drive and hope to use CDRW much more then. One...
  28. A

    Emergency! Can't boot to Windows! VCOMM.

    HI, What have you tried to do to fix it? Have you tried safe mode? Have you tried the boot menu and having it ask you before running each thing during startup? Have you disconnected the scanner? Can you still get in to the hard drive to edit/replace files? I did a search on my HD and...
  29. A

    Plextor DMA on ASUS A7V ->Plextor Support Team->Not Possible

    Stealthy, With the change from the Asus to Abit boards, what difference have you seen as far as the Plextor drive goes? I.e. what difference did getting to enable the DMA mode make for you? I assume the CPU usage went down, but has that impacted you in anyway? Thanks.
  30. A

    Sound at last! Sound at last! Thank God Almighty, I have Sound at last!!!! (still need help though)

    Champo41, Here's all my IRQ's. I have an A7V and a SB Live! (X-Gamer). 0 System timer 1 Standard 101/102-Key or Microsoft Natural Keyboard 2 Programmable interrupt controller 3 Communications Port (COM2) 4 Communications Port (COM1) 5 Creative SB Live! 5 ACPI IRQ Holder for PCI IRQ Steering 6...
  31. A

    Plextor 12/10 or Yamaha 8/8 for just under 2/3s the price?

    Noriaki, You can get a better price then those. I'm in Ottawa and I know of at least two good shops that sell the plextor for under $450. One is even an online store and you could order from it if you are not in the local area (and can drop by it). Check out www.dealsdirect.com. They...
  32. A

    POLL: Post your HDD scores (HDtach 2.61)

    Asus A7V with Quantum LM 20 Gig on the ATA 100 controller. Random Access time 10.2ms Read Burst 55.7 mbps Read Speed Max 29 mbps Min 25.5 mbps Avg 26 mbps CPU 2.0%
  33. A

    Wingman Force 3D joystick, what's it like? is it as good as Gamers Depot say?

    HI, I can't really provide a comparision, but I do own a Logitech Wingman Force 3D. I only got it a few days ago. I like it myself. I find it more comfortable then my previous Wingman Extreme. So far I've only played Crimson Skies with it. I do find that it is very sensitive and it is...
  34. A

    Plextor 12x10x32A

    Citadel, I would just like to confirm which VIA chipset you are using. Do you know what version, or could you provide me with which motherboard you are using? In particular, I'm concerned about my Asus A7V motherboard with the VT82C686A EIDE Controller. Also, which drivers, the MS ones or...
  35. A

    Backup Software with Plextor 12/10/32 CDRW?

    Corky-g, When I asked about a virus, it wasn't the concern of cloning one (although that is a concern), but that an activated virus could wipe out your clone disk too since it's still present if you are only using the 'hide partition' option to shield that media.
  36. A

    Backup Software with Plextor 12/10/32 CDRW?

    Radarman, Before switching products, check out Drive Image 4.0, it also goes direct to CDRW. I haven't tried it myself yet though.
  37. A

    UDMA CDRW on VIA chipsets

    Tboo, How did you check for the DMA mode?
  38. A

    Plextor 12x10x32A

    HI Bclay23, Could you tell me what motherboard/chipset you are using it on, and whether DMA works for you? I've started another thread last night asking about this. I want that drive, but it seems to have problems with DMA on VIA chipset motherboards. I want to clear this up before...
  39. A

    Backup Software with Plextor 12/10/32 CDRW?

    Corky-G, OK, I see why this works for you. You're using two devices for backups, not just one. You're making up for the shortfalls of using a second disk by supplementing it with CDR or SuperDisk. I was trying to find just one solution. Perhaps I should consider your method, although it is...
  40. A

    UDMA CDRW on VIA chipsets

    HI, It might be difficult to know for sure if you have DMA one. One way would be to watch the CPU usage while reading a large file from the CD drive. I found that the VIA DMATOOL would allow me to turn on DMA for my HP 8110, but it was lying. The drive doesn't seem to be a DMA drive, and I...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |