Search results

  1. Corsair Vengeance LPX 2800MHz DDR4 Review

    Overclocking Corsair 2800MHz Vengeance LPX kit offers two XMP profiles. First is 2800MHz DDR 16-18-18-36-2T at 1.2v profile, and second XMP profile rated for 3000MHz DDR 16-18-18-39-2T at 1.35v. We set the Corsair kit running at Profile 1 which is 2800MHz and system booted fine. Windows...

  2. Corsair Vengeance LPX 2800MHz DDR4 Review

    Now zooming under the heat spreader and we found that the kit is made of single sided DIMMs( that is the memory chips are placed only on one side) having 8 x Hynix H5AN4G8NMFR (a 512M x 8 configuration 4Gb DDR4 Memory chip) ICs . On the other side we found a long strip of epoxy tape used to...

  3. Corsair Vengeance LPX 2800MHz DDR4 Review

    Corsair Vengeance LPX 2800MHz DDR4 Review The latest Intel X99 Series platform comes with DDR4 memory form factor offers higher frequencies, greater bandwidth, and lower power consumption than DDR3 modules. Many vendors offers wide range of DDR4 product, but today we are looking and...

  4. Gigabyte X99 UD4 Motherboard Review

    W Prime v2.10 Power Consumption Wattage reading as per displayed by APC Pro 1000VA (Model no. BR1000G-IN) UPS. Pros Affordable X99 board Very Stable Good and easy OC with Easy Tune I/O LED with ON/OFF capabilities Black sleeve SATA cables Built-in M.2 and SATA Express support Cons...

  5. Gigabyte X99 UD4 Motherboard Review

    Bundled Software Overclocking Overclocking on Gigabyte x99 UD4 was very easy. Auto tuning feature of Gigabyte’s EasyTune application took Intel i7-5820K from stock 3.3GHz to 4.3Ghz easy. Further under advanced CPU OC feature we were able to overclock upto 4.8GHz stable with Vcore at...

  6. Gigabyte X99 UD4 Motherboard Review

    9. ITE IT8620e is SuperIO chip monitors temperatures, voltages and other key metrics for normal operation and overclocking. 10. Fan control and monitoring is performed via ITE IT8792E the system controller. 11. NXP L04083B . NXP Semiconductors a 4 differential channel, 2-to-1 multiplexer...

  7. Gigabyte X99 UD4 Motherboard Review

    5. Gigabyte AMP-UP Audio is powered by Realtek ALC1150 (under the EMI shield) is a high-performance multi-channel High Definition Audio Codec that delivers an exceptional audio listening experience with up to 115dB SNR, ensuring users get the best possible audio quality from their PC. The...

  8. Gigabyte X99 UD4 Motherboard Review

    Removing Heat sinks Solid aluminum and copper heat-pipe type heatsink with thermal pad installed, giving great passive cooling to VRM MOSFETs and x99 chipset. Perfectly designed heatsinks and board layout results in given a great socket room to install some big after market Air cooling...

  9. Gigabyte X99 UD4 Motherboard Review

    5. Back I/O Ports. 1 x PS/2 keyboard port, 1 x PS/2 mouse port, 6 x USB 3.0/2.0 ports, 4 x USB 2.0/1.1 ports, 1 x RJ-45 port, 1 x optical S/PDIF Out connector, 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In), 2 x Wi-Fi antenna connector holes . 6...

  10. Gigabyte X99 UD4 Motherboard Review

    LOOKS Board is in a black and yellow colour theme. Layout Detailed layout of the board 1. Intel LGA2011-3 CPU Socket 2. 8 x DDR4 DIMM sockets supporting up to 64 GB of system memory 3. 4. 24-pin ATX and 8-pin ATX 12V power connectors.

  11. Gigabyte X99 UD4 Motherboard Review

    Gigabyte X99 UD4 Motherboard Review We are really impressed with the Intel’s new X99 platform; it got some serious power with introduction of latest DDR4 quad channel memory support. All power comes at a price and it’s not a low one. But ones platform is up and running, you will realize...

  12. [Scratch Build] Phase Changer RIG. INDIA

    Intel internal thermal sensor cant read lower than -10c...

  13. [Scratch Build] Phase Changer RIG. INDIA

    Some Cable Managament.. Some OC.. Evaporator at -36c, CPU socket backside at -23c.. 5.2Ghz. it was easy.. Now have to refill the Phase changer for better temp.. Will do more OC till Sunday.. Rakesh Sharma

  14. [Scratch Build] Phase Changer RIG. INDIA

    Adding Handles

  15. [Scratch Build] Phase Changer RIG. INDIA

    More Updates RAM Cooler

  16. [Scratch Build] Phase Changer RIG. INDIA

    Got New GFX and i7-2600k ...

  17. [Scratch Build] Phase Changer RIG. INDIA

    Some More update... Insulated the mobo...(Still waiting for i7-2600K from RMA).. Have to purchase a GFX.. and a good one... Hope all are enjoying the build same as me. Rakesh Sharma

  18. [Scratch Build] Phase Changer RIG. INDIA

    Not tested with 200W- 220v AC of thermal resistance .. At full load for more than ten minutes temperature remains to -32C.. … Mind I have not vacuumed the unit (It takes about 2 + hours).. after that I hope to reach -40C.. will do vacuum afterwards. Now assembling the PC together and...

  19. [Scratch Build] Phase Changer RIG. INDIA

    So Here I am with first Test run of my Phase Changer unit. Yesterday evening I have started working on the Phase changer.. till 9 PM I am finished all fitting and ready to fill gas a test run.. Since this is initial testing so I have not vacuumed the unit.. instead I have just flushed some gas...

  20. [Scratch Build] Phase Changer RIG. INDIA

    Hello to all.. first sorry for a late update.. Due to some health issue, modding was on hold for me.. but I am fine now, and was working for two days to finish the evaporator. And happy to tell you all that, at last I have finished it.. and tested it under high air pressure for any leak&#8230...

  21. Modding ASUS MeeGo Netbook

    Modding ASUS MeeGo Netbook . Two days ago I purchased a ASUS Meego Netbook..just for internet use..But with Atom single core @1.6ghz , 1 GB ram and 250 GB hdd..it was a real poor experience… But I Modded it, so this is the story.. Good Netbook very thin and light weight.. First...

  22. [Scratch Build] Phase Changer RIG. INDIA

    Cool.. Nice to hear that you are too from India..

  23. [Scratch Build] Phase Changer RIG. INDIA

    Still waiting for evaporator.. mean while just done some new hardware test run and OC the i7-2600k with stock cooler on saturday night.. it was quite a fun. Sabertooth P67 is a solid board when combined with Kingston Hyper X RAM i got some good result.... below is the best stable OC with Windows...

  24. [Scratch Build] Phase Changer RIG. INDIA

    Thanks Just waiting for evaporator.. then will charge the phase changer..

  25. [Scratch Build] Phase Changer RIG. INDIA

    The Phase changer controller can be programmed for ten preset settings. I have set three settings. One for max oc.. maintain lowest possible temperature. Second -2 degree for normal OC And finally 6 degree for normal working. It will control the compressor and the condenser fan according to...

  26. [Scratch Build] Phase Changer RIG. INDIA

    Sunday update: Worked late night and finished all major holes creating work on the case and PSU holder plate also done. Now in morning testing all fittings. First some good Black M4 5/6 Screws for fan and Phase changer Controller installed ..

  27. [Scratch Build] Phase Changer RIG. INDIA

    Some holes for Fans. Front USB panel and hole for card reader. A controller or junction board to power fans, LEDs, power relays, etc is ready. Thanks to Rex Liang from KINGSTON, for supporting my PC build.

  28. [Scratch Build] Phase Changer RIG. INDIA

    Just purchased a DVD Drive and colored it A card reader and few internal front panel cables.. These cables are too short for my case.. So made some custom long cables First Front panel cable Extra long com port connector Extra long front USB header cable, made from old Logitech...

  29. [Scratch Build] Phase Changer RIG. INDIA

    Perfect.. Done Sunday Morning.. Color the tray and hdd stand. First coat. About evening.. it's done.. Looks cool.. Got a package from Taiwan Some purchase:

  30. [Scratch Build] Phase Changer RIG. INDIA

    Second a Parcel .. I think i know what's it ..... It’s a Sabertooth P67.. woooo. Sabertooth is having real looks.. super cool with that Thermal Armor. Cutting hole in mobo tray using Chisel and hammer. It took about 2 hours to cut hole for Mobo power cables and Real time...

  31. [Scratch Build] Phase Changer RIG. INDIA

    First Compressor It’s 1/8 Hp compressor which can handle R404A gas, Permitted Evaporating Temperature -47 .0 to -6.7 c (just specifations, can go more low with this compressor.) Suction Pressure 24.6 psig Discharge Pressure 354 psig Some tools ..

  32. [Scratch Build] Phase Changer RIG. INDIA

    Just to give an idea how huge this frame is, I have placed a PSU .. so you can understand seriousness of the matter. Final the frame in done it’s about 4pm on Sunday.. This build can take some time.. since I am fulltime Office employ and family executive at home. So full modding on...

  33. [Scratch Build] Phase Changer RIG. INDIA

    Time to join the monster together.. Perfect tapping of screws. First top frame. Perfect right angle joints.. Now bottom one. Both ready.. More to go.. now top frame rod screwed. Front side ready… there goes back side too .. Frame is ready .. it look huge.. everyone in the house...

  34. [Scratch Build] Phase Changer RIG. INDIA

    Have finished cutting and finalizing the ends of the rods for the case frame. Now have to drill holes and join the frame together. First marking center of the rod. Punching hole for drilling. Hand drill in action. Used new wooden drill bit set.. so drilling was very easy .. First I tried...

  35. [Scratch Build] Phase Changer RIG. INDIA

    Hi, I am Rakesh Sharma a software developer by profession but DIY type guy by heart, from a small town ‘Jodhpur’, INDIA. DIY stuff is my hobby or better a passion .. I have done few case builds, modding and making of water cooling kit from scratch..in past and posted in many...

  36. DIY PC water cooling and Case

    Thanks you all.. Specially "Aigomorla", the alumi rad i am using is having some type of coating on inside to resist Galvanic effect. It's working fine till date. I have chemically tested the water sample from the loop for any type of oxidation traces due to galvanic.. but it came safe...

  37. DIY PC water cooling and Case

    Thank you Sir.

  38. DIY PC water cooling and Case

    Transparent DIY CASE AMD Phenom II 720(unlocked 4th core @3.7ghz)(Selfmade Water cooling) Biostar TA790GX 128M Kingston 2 x 2GB DDR2 800, WD Green 2 x 1TB Sata, Sapphire HD4850 512MB, Asus Xonar DX, AOC F22 LCD, DIY 7 channel Speaker with Mega 12" Subwoofer

  39. DIY PC water cooling and Case

    Are you asking about OS or what..??

  40. DIY PC water cooling and Case

    So added 1.5mm thick copper plate, this done the trick. Now at ideal system GPU is 39c Memory at 41c CPU at 34c After playing Bioshock 2 at 1920 x 1080 for two hours. GPU is 47c Memory at 49c CPU at 41c COOL…. I think I have a nice temperature for my rig. Will try to OC GPU now. Have...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |