Search results

  1. W

    Need help with my T-bird o/cing!

    Yeah, it could be it's limit, or it might just need a little more juice (voltage) to get it to go higher. There's also another possibilty, it *might* be BIOS related. I came across a new beta BIOS listed on Abits FTP server, ver. *UZ103b1* and this is what it says in the accompanying text file...
  2. W

    What week did they start locking Durons/Tbirds ?

    I guess week 27, because that's what I have and it was locked.
  3. W

    Abit KT7 How do you enable CAS 2 133mhz?

    At the BIOS screen, under the SoftMenu III setup menu, set the DRAM Clock to HCLK+PCICLK, that will set it for 133 MHz. Now, for the setting the CAS timing, look under the Advanced Chipset Features setup menu for SDRAM Cycle Length, and set it at 2
  4. W

    what are the default voltages for 1ghz bird

    It's 1.75v . 1.85v(safe) is the highest voltage you can set on any of the motherboards that allow for adjusting. Anything higher will require modification of the mobo itself.
  5. W

    Vcore voltage on a Duron ?

    It's 1.6v. But you souldn't have to worry about it, because when you startup your system the processor will run at its default rated speed and voltage, and they can only be adjusted if the processor is unlocked(L1 bridges are closed), and then the user manually changes them in either the bios...
  6. W

    Is this Duron 600 going to overclock well?????

    Probably, but the only sure way know is to try it and find out. As long as you have good cooling and a decent power supply, you should able to OC it with good results, say 900MHz up to 1 GHz.(results may very :P ) Personally, I have been able to get my Duron 600 up to 1GHZ (post& load Win...
  7. W

    Power Suppy?

    Mmmm, Maybe. Duron/Athlon systems can be real picky when it comes to power supplies, so much so that AMD keeps a list of approved power supplies on their site. Personally, mine did not work for me, but a cheap(35$) replacment PS(AMD appr.) worked perfectly.
  8. W

    Opinions on the Coolermaster DP5-6H11 ....

    Well, it's rated for T-birds up to 1.1 Gig , but personally I would want a little something more if OC'ing a T-bird. The Cooler Masters are OK for Durons up to about 950Mhz or so, but not much more.(my Cooler Master/Duron 600 system will not run totally stable at 950 unless I use a small 8&quot...
  9. W

    Need help locating CAS/RAS info please

    OK, it's been a while, but here's a LINK to a site with a couple of good articles on memory, and here's another to Kingston Tech's memory guide, for more general info on memory.
  10. W

    Abit Kt7-Raid, kt133 and Win2000...whats the problem here?

    There seems to be a little problem with Win 2k and the VIA chipset, basically it's because of << incomplete support for the VIA chip set in the Windows 2000 AGP drivers. >> Here's a LINK to a posting on MS' knowledge base, concerning the problem, and another LINK regarding AGP/vid card...
  11. W

    How do I mod the AMD T-bird to OC

    Here's a Link to another OC'ing article, complete with pictures.
  12. W

    Ouff...Duron 700 won't POST -- not even overclocking yet

    It may be the power supply. The socket A mother boards can be really particular about the PS s' used sometimes, so much so that AMD has a listing for approved PS s' for Duron and Athlon systems. When I uppgraded to a KT7 &amp; Duron 600 I could not even get it to start up, only the fans would...
  13. W

    Duron 700 made in week 24??

    Yes, they are week 24. When AMD first launched the Durons, they were available at speeds of 600,650 and 700MHz. As far as overclocking goes, with good cooling 900-950MHz is usually not that hard to reach, and even 1 GHz is possible, (sometimes) :( .
  14. W

    UDMA100 on the ABIT KT-7?

    No, it does Not. The chipset that gives the KT-7 RA it's raid capabilities, is also the one that supports ATA 100, and it is absent from the KT-7.
  15. W

    Has anyone experianced degredation over time w/pencil trick?

    As of yesterday, it's been 8 weeks since I unlocked my Duron 600 with a little no.2 graphite overclock key.(yes,a pencil :P ) It didn't work the first 2 attempts I made, but as they say the third time's . . . a . . . (a real sonofab*tch to have to remove the heatsink again) :Q...
  16. W

    Windows ME/SB Live problems

    I also have a SB value &amp; Win Me, and I havn't had any problems with my set-up.(so far} I've been reading about quite a few problems with SB and some socket A boards, but with my KT7 system using Win Me, it works fine. You might try moving your SB card to another PCI slot, it seems that it...
  17. W

    why does my KT7 system only boot up 1 outta 3 times?

    It might be your power supply. Although you have a 300 w PS, I don't see it listed on AMD's approved PS list. Since I've responded to post like yours a dozen times before, I'll just give a LINK to a another forum where I (KTseven) responded. I suggested the same thing to Rthur 's problem a...
  18. W

    Any sites have links to mobo manufacturers?

    Is this the site your looking for?(LINK) I found it listed in slota.com 's motherboard list while searching for some info for someone else.
  19. W

    newbie: looking for a motherboard for amd duron

    Hi, you might try here. (LINK) They have quite a big list of AMD motherboards, both slotA and socket A(Duron). If nothing else you will be able to see the various boards currently out there, and you can easily get to the individual manufacturers sites by clicking on them.
  20. W

    need help overclocking

    It really is pretty simple.(almost) It didn't work the first time I tried it, but after redoing it(simply erasing and remarking it) everything woked perfectly. Here's a link with close-ups of the process and a litte info. LINK
  21. W

    HELP!!! Fuzzy text with KDS AV7FT

    Try adjusting your freq. down a little(75-72Hz) and see if it helps. I just temporarily turned mine(AV-7T)up to 85Hz at the same res and the edges did look a little bit funky, so it's back at 75 now.
  22. W

    need overclocking help

    Here's a Linkto a page with more pics and info.
  23. W

    need overclocking help

    Personally I use both. I have a Duron 600@ 770Mhz(7x110), setting the fsb/pci at 105/35 and the fsb+ at 5. The PCI+ is a good way to overclock your fsb higher without stressing the other hardware( soundcard,modem,vid cards, etc.)because it does't run the PCI &amp; AGP busses out of spec., which...
  24. W

    duron---- what is an HB pencil?

    It stands for Hard Black. Really, look HERE. If your able to adjust the FSB and multiplier, there's probably some other reason(s) for it not going higher.
  25. W

    KT7 USB Header????

    Try here The KT7 header only has 9 pins, so only one 5 pin connector would (possibly) work, not two. (maybe) :confused:
  26. W

    Overclocking AMD Duron???

    Believe it! Ahem, often refered to as the Pencil trick, it is the simplest and cheapest way to unlock the Duron or T-bird socket A processor. It's been 4 1/2 weeks since I unlocked my Duron 600, and it hasn't missed a beat yet. :)
  27. W

    pictures of the pencil trick

    Try this page HERE
  28. W

    motherboard monitor not detecting 3rd fan; WHY????

    Well umm, it's a Beta release. Those are some issues that may need to be adressed, along with any others that appear, before it beomes Final. I read that the guy who is writing MM almost quit working on it,(or did) but due to popular demand and the response he got, he decided to try and...
  29. W

    My *ahem* pretested D600>900 won't even post at 700...Any thoughts?

    Well, it still could be a power supply problem. First off, with everything you have hooked up up to your power supply, I'm suprised that it even runs. I had to change out my 250w PSU to an 300w AMD approved unit just to get my computer to start, much less run. All I had hooked up in my Duron...
  30. W

    Do I need a good video card to boot a Duron600???

    No, you don't need a good video card to boot up, or even to load windows. As long as it is at least a pci video card capable of VGA output, it should work. Now as far as a minimum card, it depends on what kind of performance you're looking for. If you want the latest and greatest without...
  31. W

    Need help optimizing MB bios

    I believe the S stands for secure.
  32. W

    Unlocking Duron

    Here's a link to a how to article. Unlocking socket A
  33. W

    Coolermaster HeatPipe 5K11

    Hi. Could they be talking about the heatsink next to the 5K11 on the top of their main page? Link
  34. W

    How much can you overclock your Duron?

    Duron 600 - OEM, week 27(locked) CoolerMaster - HS/F (DP5-6H53) ABIT KT7 - non-raid PC100 mem - Micron (Cas2,Turbo) Current setup: 777Mhz (7x111fsb) 1.62v, CPU temp 40-44C, case 29C Maximum Speed: 950Mhz - runs stably with open case 1 GHz - posts,loads...
  35. W

    Do Duron's require PC133 memory + which Duron to get???

    OK, first off you can use your PC 100. The VIA KT 133 chipset does support 133, but does not require it. I am using my PC 100(Micron) out of my old K6-2 system, and it runs fine.(even at 112 Mhz. :) ) All you have to do is set it at the host clock speed(FSB,100 Mhz). To run it at 133 Mhz, at...
  36. W

    How do you get the Temperature from the CPU?

    Well, on a socket A boards, such as the ABIT KT7, there's a built in thermistor in the middle of the socket base for the CPU. Now on the slot A, I think you have to use a wire with a thermistor on the end, and physically mount it to the CPU(?),providing there is a connection on your motherboard...
  37. W

    First time oc - Duron 600 @ 800 n/p

    Well, if you're not having any problems with it right now, and it isn't crashing or locking up, (that comes later when running Win 98) :P then it shouldn't be a problem. Do you have a mother- board with an onboard CPU temperature sensor? (ABIT KT7,ASUS A7V?) If so you can monitor the temp from...
  38. W

    FOP-32-1 thermal pad sufficient for Duron 600? ***New to o/c'ing***

    Yes, it should be fine. I'm not sure about the GlobalWin, but most AMD approved heatsinks come with a phase-change compound pad on it. The compound is supposed to conform to the CPU,and when heated it cures(?), promoting good heat transference. Since you are going to be using a KT7, you can use...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |