Search results

  1. G

    Need tips repairing PSU

    Recently I replaced fan in the PSU, The fan molex pressed the green pcb card and made it move. My suspicion is either soldering got loose on powerplug or a component on that green PCB got damaged. I have a soldering Iron + multimeter, I'm going to disassemble the PSU. Now I need...
  2. G

    Mouse for my hand?

    On the top left picture I have lifted mouse from mouse pad, other pictures are taken with mouse lying down on mouse pad. atm I have Razer Abyssus, sensitivity 450 dpi, 6/11, 65CM/360, Black cloth Qck+. As can seen I grip / lift the mouse with thumb + pinky finger also my palm makes contact...
  3. G

    Negative performance Crossfire

    CPU bottleneck gives 1 card 120fps but two cards 110fps + microstuttering at same settings? my 2500k@4.7Ghz is happily pushing 3 gpu's in BF3.
  4. G

    Negative performance Crossfire

    Most games and software have solid crossfire scaling but not Max Payne 3, I get more fps with one card and less microstutter with one card. my 2nd card needs way more voltage, for 1100c/1575m it needs 1.25v, also I have played alot of games including BF3. Seems like 2 cards has...
  5. G

    Low fps Max Payne 3

    Ive read a article here on anandtech that anything past 1600 does not give gaming performance. Here is my cpu usage, it's mostly 45%, never over 80%
  6. G

    Low fps Max Payne 3

    2600k is not better than 2500k for gaming at same clocks. I have 32 lanes PCI E 2.0 (16x 8x 8x), If you have proof that I need 40lanes PCI E 3.0 if you have a link please post, otherwise I'm not going to buy a new motherboard without proof that it will help.
  7. G

    Low fps Max Payne 3

    How can it be bottlenecking when on the first diagram it's 80% peak CPU load. Also it's 3x 7950, I did try one 7950 and 2 7950 with no help.
  8. G

    Low fps Max Payne 3

    I'm not entirely sure what's going on... Either Max Payne 3 is a console port or something is wrong with my hardware. I don't have CPU or GPU bottleneck, maybe my motherboard has too low PCI-E bandwidth (PCI-E 2.0 x16 + x8 + x8 = 32x total). This user with 4x 7970 and 2011 CPU gets...
  9. G

    3TB SSD? Other options for high speed computer and game storage?

    Are you saying that under 2k USD for 3TB storage for games on SSD would be acceptabel? I have 2x Crucia V4 in Raid 0 (2x 256gb = 512gb), they work excellent for my needs (installed games, movies, documents). But if you look on newegg however alot of ppl have problems with them.. You could buy...
  10. G

    Haswell model specs leaked

    Is that in the integrated gpu? I have sandy bridge system with crossfire AMD 7950, I guess I would not see that big improvement going from 1333mhz to 1600mhz?
  11. G

    Disable or decrease VTT or PLL?

    46 x 100 = 4.6Ghz. Vcore +180mv CPU VTT 1.20v (Default 1.10v), PLL Overvoltage Enabled. CLL 75% (I think have nasty Vdroop). My reported vcore is 1.392v - 1.424v during Linpack, mostly it is at 1.4v Can I decrease or disable CPU VTT or PLL Overvoltage? Trying Offset +160mv gave...
  12. G

    Too low voltage harmful?

    So If I never experience BSOD or crashes I'm good to go then with the lower voltage and lover GFlops in Linpack? Edit--> Seems like false alarm, I had photoshop open, after closing it seems like I'm getting similar results with +180mv as with +210mv. Also I got BSOD with +160mv.
  13. G

    Too low voltage harmful?

    Hello I recently started tweaking my 2500k and found out by Enabling PLL Overvoltage, LLC to 75% and putting CPU VTT to 1.20v (default was 1.10v) made me achieve above 4.4ghz speeds. I'm currently testing 46x * 100 = 4.6Ghz, Vcore Offset +210mv gives me 111GFlops (Linpack with AVX). But...
  14. G

    2500k mobo and software vcore

    AUTO only gets me up to 4.1Ghz stable. I bought this CPU used and the previous owner run it at 1.45v and 4.9Ghz. My hope would be to have at most 1.4v(depends on my temps) and 4.3-4.7Ghz.
  15. G

    2500k mobo and software vcore

    Well I have realised that I have been reading VID voltage and not the real voltage. Interesting enough both CPU-Z and HWINFO show vcore: MAX: 0.848v this is what was shown when stressing it 100% all 4 cores, IDLE it is 0.632v, and MIN is 0.600v. So I think that either my mobo BIOS or a...
  16. G

    2500k mobo and software vcore

    Well I tried the Intel software but basicaly on my PC I need to restart and then the Intel software modifies the BIOS so I could just aswell use the BIOS instead of Intel software they do the same thing. This is what I have achieved so far: my Mobo has LLC: Disabled, 25%, 50%, 75%, Enabled...
  17. G

    2500k mobo and software vcore

    So I put vcore to AUTO in BIOS then I can change vcore in Intel Extreme Enthuasiast?
  18. G

    2500k mobo and software vcore

    For now I'll OC using BIOS, I'm not confident using a software for this stuff. in BIOS CLL was enabled, I'm assuming enabled is 100%? To make sure CLL is active I changed enabled to 75% So now CLL is at 75% I put speed to 3.4ghz and vcore to 1.3v still seems like I have too low vcore...
  19. G

    2500k mobo and software vcore

    Seriously is Software overclocking just as safe as BIOS overclockin? If that's true it's really awesome :) I'll have to look further into sofware OC. Edit---> I'm pretty sure my BIOS only has AUTO mode, incase no OFFSET mode is AUTO ok?
  20. G

    2500k mobo and software vcore

    I recently installed a Intel 2500k and Sapphire Pure P67. Now if I put in BIOS vcore to 1.45v then start HWINFO32 for logging and start Intel Burn Test then the MAX vcore according to HWINFO32 is 1.356v. If I put BIOS vcore to 1.55v(!!) then the MAX vcore in HWINFO32 is 1.376v. If I put...
  21. G

    T1/D1+ 252celsius

    Ok, I recently upgraded my PC with a Sapphire Pure P67 and a Intel 2500k, when booting I was shocked at the T1/D1+ it's 252 celsius D: But I think this is a bug(?)
  22. G

    OC 2500k help

    So If I want to it undervolt in IDLE I should use offset? So let's say the VDID for my CPU is 1.3v I put offset to +0.05v, then when LOAD the voltage is 1.35(?) Then when in IDLE the voltage is something like 0.9v(?).
  23. G

    OC 2500k help

    I own a locked Intel i5 CPU, it was wery easy to overclock I just changed multiplier and vcore :D But soon I will own a used 2500k that does 1.45v@4.9Ghz. However I have quiet PC and cooling is enough for 1.2-1.32v only mostlikely unless I crank up the fans. In IBT I will make sure to not...
  24. G

    2500k and 3570k for quiet PC?

    I have a Intel i5 2310, it's 2.9ghz but I have a Z68 mobo and I have overclocked all 4 cores to 3.4ghz. I can't put on the C-Stated because my mobo has annoying coil whine and mobo has no warranty. *"Consensus is that even though Ivy is faster per clock, Sandy can typically overclock enough...
  25. G

    2500k and 3570k for quiet PC?

    I have put in BIOS undervolting, the voltage is fixed in BIOS so it never goes up/down atleast not alot. Also my CPU is locked, I want buy a unlocked CPU :)
  26. G

    2500k and 3570k for quiet PC?

    I'm currently running a locked Intel i5 3.4Ghz it's using 1.05v vcore, it has a 500rpm 120mm fan and a Mugen 2 rev. B. But I would like to have more speed, maybe 4.0 or even 4.2Ghz. Do you guys think this is possible with unlocked CPU? I know the 3570k is slightly better clock for...
  27. G

    Razer Abyssus New for $20? With mouse pad!

    Well that all depends on if the materials = original Razer Abyssus. Then it makes no difference even if coming from other Razer/steel series mouse :) BTW if you want you can try register the mouse on Razer China to see if it is original Mice, but I think it is not original Razer.
  28. G

    Razer Abyssus New for $20? With mouse pad!

    I wonder if the materials is identical to a Razer Abyssus? If it is then I would also buy one :) But price seems wery cheap.
  29. G

    1.056v i5 2310?!

    Yeah I guess Sandy Bridge is around 1volts stock? I wonder which of the Temp1, Temp2, Temp3 is the motherboard, 43c is high for motherboard and 54C is WAY high imo.
  30. G

    1.056v i5 2310?!

    Just installed a Intel i5 2310 with Z68 motherboard Overclocked max in BIOS +4 bins so 4 cores run 3.4Ghz Turbo mode instead of 3.0Ghz. When running Prime95 according CPU-Z 3410Mhz but Core Voltage 1.056v <---- this sounds low no? Ive so far run Prime 95 64bit for 20minutes and core...
  31. G

    Triple crossfire gaming PC

    I was first considering a Phobya 1080, It's really almost same price as the Phobya 360 rad but I feel having tighty system should be nicer looking. I will be running fans at 500-600rpm for low nosie gaming: Right now the computer: Option 2 is buy 1080rad instead of 360rad:
  32. G

    2nd Watercooling build log

    So after once trying watercooling I decided to do a 2nd build on same PC. I was disappointed with the placement of reservoir and the fact that the HAF 932 is so tiny and hard to work with unmodified. Also I wanted to eliminate leak damage, so now if reservoir, rad, pump leak no PC component...
  33. G

    Thuban and unstable NB

    How can I get my Memory to 1600 and NB and HT Link to 2000?! I have a 1045t 95W X6 cpu. CPU Voltage is 1.400v. If I put in BIOS FSB to 237 and NB and HT to 1659 I can have Memory at 1580Mhz(it is 1600 memory). Now If I put FSB 240, then it gives black BIOS with 1659 on NB and HT. So...
  34. G

    Rma 7970?

    I played Saints Row 3 fine but I had a session 1h20min and once I get to the trojan wores episode once I get up to roof to kill snipers I get artifacts. I had small OC 999/1375 so I put back to 925/1375 so stock and still same episode on roof sniper I get artifacts?! Should I RMA or is it...
  35. G

    14x120mm external rad

    Well I want to run completely passive my system and wonder if it can be done with 3 external radiators, is there any problems? I want to use Quick disconnecst on the 2 tubes going out of case so that I can easily move case without draining system. Here is what I want to do: Here is...
  36. G

    Me overclocking 7970

    So this is my log for overclocking my 7970: MSI Kombustor: 1125/1375: FPS: min 139, max=144, avg=141 VDDC starts from 1.057v but goes to 1.051v during the run in kombustor. 925/1375: FPS: min 116, max=119, avg= 118 Gpu-z VDDC=1.057v So just overclocking core kombustor...
  37. G

    Couple of question on completed cpu cooling

    Well there is tension because the tube is so short so it is pulling both pump and res, I don't know how much the tension is, normal rotary does not bend this does because of tension. In future once I get more tubing I proably will put a longer tube and remove the 45 degree fitting. As for why...
  38. G

    Low noise 7970 and cpu

    So I own 2 rads, I want to install them in my HAF 932 to watercool a 7970 and a cpu 125w. But hopefuly in future it also is able to cool 2x 7970 + cpu and fans only running 500-800rpm. The one I currently have is 240: 276 x 123 x 47mm I also own a 360 rad 396 x 120 x 45 mm My goal...
  39. G

    AX750 cpu not going into mobo

    I doubt it is wrongly inserted as the pc would not even start? I'm currently typing from it, however a bit worried that if moving the case hard maybe it falls off.
  40. G

    AX750 cpu not going into mobo

    so the left cable does not click into motherboard regardless how much force I use. it is 2-5mm from going inside it, something to worry about? you can click on picture for bigger picture
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |