Search results

  1. So I just bought my first SSD; OCZ Vertex LE 100g

    Wendy I don't profess to be an expert on SSD's but when I run "fsutil behavior query disabledeletenotify" from an elevated command prompt, Windows 7 say's that Trim is enabled. Is Windows 7 reporting falsely? My raided hardrives are far from being full and I've seen no degradation as of yet.

  2. So I just bought my first SSD; OCZ Vertex LE 100g

    Hey I just realized 100 post in ten years, I tell ya I talk to much....

  3. So I just bought my first SSD; OCZ Vertex LE 100g

    How do you tell if Trim is enabled with windows 7? the only way I know is from an elevated command prompt using: fsutil behavior query disabledeletenotify Results explained below: DisableDeleteNotify = 1 (Windows TRIM commands are disabled) DisableDeleteNotify = 0 (Windows TRIM commands...

  4. So I just bought my first SSD; OCZ Vertex LE 100g

    Yes and for those who want to know Trim is supported in Raid 0 with the Vertex LE (sandforce) :)

  5. Intel drivers now pass TRIM command to Windows

    With the newest driver 9.6 Trim is supported in raid with my Vertex LE's (sandforce)

  6. So I just bought my first SSD; OCZ Vertex LE 100g

    I haven't posted in a long time, but with my bonus check this year plus Newegg had owed me a discount, (on one of them) I bought two. Some Benches from a few days ago, no optimizations just the basics.. I'm happy so far....

  7. ASUS 3870X2

    Thats why I'm looking at the asus 3870 x2 it has 4 dvi's so I could run 3 monitors. Really don't want to upgrade my MB right now and I think this will give me the most bang for the buck. It's $195 at new egg with a 30 rebate makes it $165 did not know GeCube or his mad them also will have to...

  8. ASUS 3870X2

    I have an Abit IP-35 E motherboard, only one PCIE slot, and I have three monitors right now I have one Nvida 6200 LE on the PCIE and one 6200 on the PCI to run the three monitors, I'm debating about upgrading my motherboard or just buying the ASUS 3870X2. For those of you who own the ASUS...

  9. 3 pci express 16

    With 3 pci express 16 slot motherboard and three monitors would it be possible to run two cards in either sli or crossfire mode for the center monitor and allow the other card to run the other two adjacent monitors? Obviously all three cards would be the same manufacture and if needed the same...

  10. Firefox 3.0 RC1 is out!

    I don't like the new address bar and would like to see the option of turning it off, IE 6,7 and the Beta of 8 have this option. But in a e-mail from Mozilla it dose not seem like it's going to happen. [b]

  11. Time to Upgrade

    No I don't playgames, unless you call Solitaire a game. :) my uses are pretty basic the three I said above. Chief Architect,CAD and ripping. 996GT2 about flashing to quadro, thanks have to search the fourms more on that idea.

  12. Time to Upgrade

    Time to upgrade, I want to spend about $1000.00 to $1200.00. I want to over clock my main use?s are chief architect, cad, and ripping video. I?m keeping my hard drives, WD raptor 74, Seagate120 and a Maxtor 200, my dvdrw, My power 400 watt Enermax, and my 2 gig Corsair XMS memory...

  13. Raptors are for...

    Stangs55 Don't hold back tell us how you really feel about Maxtor ;) I had my issues with them also. I don't post much my advice is go for it. You won't be sorry, as for bang for the buck yea you could do better, but satisfaction is worth the extra $$$

  14. SATA II HDD's are out!!

    Seagate Barracuda 7200.7 SATA NCQ160gb drive, I'm looking right now at a letter mailed to me from Seagate, I just won it! :shocked: I entered a contest they had on their web site a couple months back. :D My question is I have a WD 37.5 G 10,000 HD which would be faster the WD ( not true...

  15. Which Raid is Faster?

    I have an Abit IC7-G which has ICH5 raid by Intel build in the south bridge and a Silicon Image controller on the PCI bus. I also have a WD Raptor and plan on getting another and running them as raid 0. My question is which would be faster, ICH5 or the Silicon Image? Has anyone actually...

  16. A long time Upgrade

    Point taking, Enermax 460 it will be. thanks

  17. A long time Upgrade

    :clock: Alright it's been a while, a long while since I felt the need to radical upgrade. My current rig is an Abit Kt7 raid an Athlon xp 2400+ O/C 2200 20 x 110 ( not a KT7a so I can't do 133) 512 corsair 2 Maxtor 20 gig 7200 2meg cache raid 0. Ati 9600 dvdr4 & 48cdrw . It's the longest...

  18. What's faster: P4 2.4 Vs. XP 2800+

    Hello! So I haven?t posted in a long time. But I do like reading the post especially Intel verses AMD. It?s like Hockey you know before the end of the game someone is going to fight. Both are good both have their merits . Me I haven?t upgraded I?m still using my Abit kt7 raid with a XP 2400+...

  19. 400 mhz bus Bartons

    The Inquirer posted this today. http://www.theinquirer.net/?article=8020 What do you think? True, False, hype? What MB or chip sets will support it? Nforce2 could maybe seen OC's that high sometimes. A: I was going to up grade in a week or 2. 2: now I think I might wait. D: Why I bought the...

  20. k6-2 450, jumper settings for a Tyan AT s1570?

    My best guess about the board from look at user man is you need to set up jumpers as an mmx cpu (split plane) jumper setting should be as follows jp27 off / jp28 on / jp29 off / jp 30 off / jp 31 on / jp 32 on their under memory to right of cpu. Then you need to tell mb thats its a 133 mhz cpu...

  21. k6-2 450, jumper settings for a Tyan AT s1570?

    Have you tried using the 3x setting, does the board boot? If not it could be cpu/jumpers. I memory serves me correct not all 400 were ctx cores. Try this link alsoMotherboards.org If you get board to boot at a lower setting that?s half the battle good luck

  22. Poor Raid Performance

    Had the same problem. Mine was caused by not setting the raid controller to ATA 100 In the raid set up you might want to check that. I also had to reinstall the windows driver after but no problems after that.

  23. Like Frankenstein it's Alive

    Here?s the deal, my power supply went, BIG TIME. It sparked, smoked, and fuzzed. Along with it went the floppy, and hard drive. The Hard drive got smoked so bad a piece of the circuit board actually flew off. Toast, it was a Maxtor hard drive, when I first bought it, it had died in 3 weeks...

  24. Comcasts your name, address, phone number is out their

    This morning I followed the Email from Comcast on setting up my account. In short when you type your username, and password it leads you to an unsecured area where they expect you to change your passwords, add new e-mail accounts and general account maintenance. Under your user profile (again...

  25. IDE or SCSI Faster or Faster

    :P Ok here?s the question, which would be faster 2 - 7200 ide drives striped in raid 0, or a single scsi 10,000 rpm 8meg cache? I?m talking single user system. With the price of scsi not being all that out of reach and the hard drive still being the albatross of the desk top computers I...

  26. HEX, Octal, or any other base (Just a question about Windows XP)

    I posted this question in the in the os section now I?ll try here. You know Pick the Brains of the Brains so to speak.. I have windows XP installed. I?m trying to disable ?Tool Tips? the little annoying bubble help that pops up when you point to any icon. Disabling it on the desktop was...

  27. RANT, RANT, A RANT on Broderbund (instead of Microsoft)

    :disgust: :disgust: :disgust: :disgust: :disgust: :disgust: :disgust: :disgust: I will try to keep this short hares my RANT. I recently purchased Broderbund?s 3D Home Architect version 4. I?ve owned previous versions of this program and I looked forward to the new version. There?s a problem...

  28. Help with my AXIA and KT7a

    I believe the PCI does go out of spec with your mb even though your using the SOFTMENU III bios. It?s either divided by 3 or 4 of the fsb. So if you set your front side bus to 160 your pci will be 40 and the agp would be 80. Despite what abit says. You can verify this with Sissoft?s Sandra...

  29. Who here thinks win2k the most stable MS OS in history ?

    The most stable to me was dos with the Geos graphical shell. Wait that ain?t Microsoft?s. Though I love to through it on a partion of my 900 mhz just to see what it would be like (if I could only find the floppies in my attic some where.) Windows 2000 is a diesel just keeps running and...

  30. Any Ideas on KT7 Problem?

    Try setting the mem to pc100 if you have not already. If the 256 craped out the 128 may not be in the best shape either. If set 100mhz already try moving mem to a different bank. your 256 133 may work at 100 again may. My best guess is its your mem running oc the way you are you need rock...

  31. Any Ideas on KT7 Problem?

    Whats your cpu speed? is it set to default or you overclocking it? Check you mem settings turn them down to see if that will help. Could be lots of things. If you not over clocking it you should use the default voltage setting for the cpu. But give some more info, CPU, mem, mem type (cas2 or...

  32. Whats the best KM133

    Hey here?s the scoop. My sister and brother-in-law?s computer is getting old. Basicly the only thing I can take to the new one is hard drive (20 gig), CD (40x), PCI modem and keyboard, mouse and monitor. I have a stick of 128 pc100 cas 3 I?ve been looking at the new mb?s using the new km 133...

  33. Crucial 256Mb PC133 Cas2 - How high does it go?

    149mhz for me at cas2 all settings maxed. Abit kt7raid 800mhz at 897 112 x8 mem set fsb (112) + pci (37) 149mhz. I just repeated my self. I just repeated my self. << :) :) :D :D >> << Nothings illegal unless you get caught. >>

  34. Bill Gates at Fault

    Something I was e-mailed Subject: Who's To Blame? > Let's see if I understand how America works lately . . . > > If a woman burns her thighs on the hot coffee she was > holding in her lap while driving, she blames the restaurant. > > If your teen-age son kills himself, you blame the rock 'n'...

  35. Anand's Dual Palomino/Tyan Thunder 760MP review is up!!! :)

    WET If I have one more Beer I'll max out my VISA Card. :P :D :P :confused: :P :confused: << People Drink to much: Steve Martin, My Blue Heaven >>

  36. Abit KT7A-RAID - Locks on disk access

    Also check your hard drives. Some hard drives misinterpret the ATA setting the hard drive company will have a fix for that Also are your cables 80 wire? If your using ATA66 drives you should have 80 wire cables otherwise you can get errors. Try keeping HD and CD's on separate channels if you...

  37. Beer, Alcohol, of Other and Computing

    Okay, Here's one How many times have you been inebriated and tried to do something to your Computer that you shouldn?t. I know I've formatted the hard drive a couple of times, also Broke some memory chips. My brother has me beat snapped a new modem in half and cracked his mother board. I on...

  38. Mouse Clouds (Did I stump the Forum?)

    :( :Q :( ?????? << Some of the worst mistakes in my life were haircuts: Jim Morrison >>

  39. k6-2 300 chip in an old asus motherboard

    Actually the 2 multiplier is remapped to 6 if it?s a ctx core, 300?s weren?t to the best of my knowledge. You also have to make sure your mother board can handle it as in if it?s a split plane mb and can you get close to voltage spec. Try setting it to 2 times 86 to see if it will post the...

  40. k6-2 300 chip in an old asus motherboard

    Woops double post (Sorry) << I only drink beer on special occasions, like when I wake up in the morning.: I have no idea who said except I say it a lot. >> :Q :D :Q
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |