Hi Folks,
Has anyone had any luck using a KVM with the A8N-SLI motherboard? I had this KVM running with my laptop and an older machine just fine, but with my brand-new motherboard the mouse and keyboard do not seem to get polled often resulting in the mouse "jumping" and the keyboard response...
Hey - I'm looking for some feedback if anyone has had problems with this memory. I can't get my machine to boot when I have sticks installed in the a1 and b1 but as soon as I take out the a1 stick it boots fine.
I've seen other people on this board that the memory works fine in the a1/b1...
I would suggest that you run System Monitor (Start->Programs->Accessories->System Tools->System Monitor). Use the "Memory Manager:Unused Physical Memory" option. Set the settings to 10 or 30 second update, then run the programs you use on a regular basis and do some things that you...
Ok,
I got my system to boot by moving the ATI card to slot 3 and removing all the other cards besides the AGP card, but now my system locks up on a regular basis [even completes booting up]. When my system does work and I attempt to display the video on a second monitor, I get an error message...
Hello,
I just purchsed an ATI All-In-Wonder 128 pro (PCI) to add to my system as a second video card. My first card (AGP) is a Hercules Geforce II MX. When both cards are installed and my BIOS reconfigured to set the AGP card to the primary display adapter, my system will not boot past the...
The correct answer is - VPN. A company should not waste their money renting a worldwide T1 or T3 unless it is the core of their business. Let traffic go down a T1 to a provider with an OC3 using VPN to secure the network traffic. Each division in a seperate company should select the provider...
DOCSargent,
I have the same exact symptoms. Although I am using two maxtor 15 gig drives, I to have the same problem with Sandra and Defrag, although I am using Windows ME.
zboss
This brings up an interesting question. Intuition tells me that if I am running in a striped configuration that I should run each drive on different channels, but is this the case? Should I be running my Maxtor drives on the same channel?
If you ghost your striped drives then destroy the RAID and set it back up again in 16K clusters, then reghost back onto the drive you can preserve you data.
Good Luck
Andeh,
Try moving some boards around. Do it one at a time - start with your video card (obviously) and set them up in the OS as you go along. Here is what I have -
Slot 1 - NIC card ( slot1 usually shares the IRQ with the AGP but I have no AGP video card )
Slot 2 - Voodoo 3 Video card
Slot 5 -...
After many trials and memory errors I finally got my system running sweet. Here's what I did.
1) I suspected that the memory might not be seated well so I moved the memory to bank three ( I have only one 128MB hyundai pc-100 DIMM).
2) I moved my Voodoo 3 PCI video card to slot 2.
3) I reset...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.