Search results

  1. S

    Isn't there a good all around sound card out there?

    Did you guys get the new drivers from creative Audigy for Windows XP ? They work great
  2. S

    Help! GeForce 4 Ti4600 Trouble

    Try the old card you had in it and see what happens.
  3. S

    Real-world impressions of going from P4 to AMD64 3200+...**UPDATE** Up and Running...FINALLY :)

    Hi NFS4 Been awhile sense I been here to get in your crawl :). You must have a bad system to be running hot with an Intel,what you need is a aircondition room lol. My system runs at 86 F at idle ( room temp 73 f ) and under load 108 F,with the 7000 zalman.So I don't thx you have every thing...
  4. S

    ASUS P4T533-C 533 FSB Memory config

    I just got two new sticks of 256megs 1066 memory, I have 4 128 meg sticks installed on my board. My question is the placement of the two new 256 meg stick to replace 2 of the 128 meg sticks. My ASUS manual dosen't show any other config beside 4 128 megs or two sticks of 128 with 2 dummie...
  5. S

    *RESOLVED* Damn you, Intel. (Stock HSF is stuck on CPU.)

    I had the same thing happen to me and ,I explained in another post on how to remove the cpu from the heatsink,that new stuff is very hard after use,and when I took mine off to put on the Zalman it pulled the CPU right out of the socket.and I didn't pull that hard either.I suggest running the...
  6. S

    Would a gamer have any use for 2GB RAM? *Includes POLL*

    Hell by the time the system address all that memory you be going to bed lol.Are you into nuke programs or something :).Hell I wouldn,t,put that much ram in mine if it was free-bee stuff.
  7. S

    I'm getting a 9700 pro

    Hell I wouldn't take second hand stuff,I would send it to me so I can give it to a person that really needed it,that dosen't want no one to envy them :).
  8. S

    Installing a cpu question

    On the copper heat sink with the compound they use now,taken the heat sink off is a pretty tricky thing because the new paste gets hard after afew weeks of use and when it,s cold.I would run the system afew min so maybe the paste will get softer and kindly tiwst the heatsink very gently a little...
  9. S

    Installing a cpu question

    Next time you order a new product,I suggest you read instruction befor installing,the idear is to get the paste over the cpu and putting it on the heatsink you guessing where center is,next to take off the heat sink you will see where the cpu was attached because the heat will make a shadow on...
  10. S

    My PC's Performance?

    Make sure you do a good house cleaning and check your monitor refresh-rate in game with the monitor menu to see if you running other than 60hz.
  11. S

    Refresh rate problem with monitor

    USE DXDiag.EXE and look under the help tab and override the refreshrate by typeing in what ever refresh you monitor supports or what ever you want.I use to use a refresh fix,but why use a program that you all ready have in windows.
  12. S

    LOCK Refresh Rate in Display

    OK guys Here is the Refresh Fix and not haft to use the NVfix 2.1.Well works for me any way.I was barking up the wrong tree,I hit my head on the desk,and it came back to me.It is not in Windows display settings fix;It is in the DXDiag.exe program and open DXdiag,and go to HELP TAB and in the...
  13. S

    LOCK Refresh Rate in Display

    need help guys come on Plz
  14. S

    LOCK Refresh Rate in Display

    Here is my problem,I locked the refresh rate in the displays properties in the past to 85refresh rate,But I forgot the path to do it again (been awhile) with out haven to use the NV-refresh fix 2.1 program.Can someone tell me what is the setting I,m over looking in the advance display...
  15. S

    MB Chipsets And CPU Temp ?

    Thx for info,and the replay.
  16. S

    MB Chipsets And CPU Temp ?

    Thx for info,and the replay. Darn I only hit it once and it posted twice.
  17. S

    MB Chipsets And CPU Temp ?

    I was wondering will the MB Chipset cause the CPU to run hotter if the MB Chipset is not cooled properly ??.
  18. S

    were is the m/board temperature read from on an i875 board?

    Should be from the cpu core sensor,but asus also has a probe to check for the reading.If it reaches 90C + it will shut down.If you have the ASUS probe monitor installed it is set at 75C I think to warn you.
  19. S

    Power up Motherboard ON

    Thanks KGBMAN / Vegetto for your replys the board runs fine and the high temp reading seem fishy because the heat sink in not eveb warn to the touch,I have smart fan enbled and the fan says on low speed even through it read 41 C wired!!.
  20. S

    Power up Motherboard ON

    When I pug in the power cord into my power supply to start up my P4PE MotherBoard,it turns on and run for about 5 seconds and shuts down. Then I push the power button and it come on normualy and runs fine.Is this a glitch for these Motherboards ??.I took the MB out of the case and ran it with...
  21. S

    DDR Memory Confusion

    You be better off staying with what you got untill you get the ready for the upgrade.I suggest you buy all your upgrade parts from the same vendor.
  22. S

    AMD CPU!!

    Lonyo No ram no price limit just the best of what they have to offer,I do have all the other parts such as a ATI 9800 pro.btw not much faster than my old 9700 pro.should have went with the review comments befor I got the 9800 pro BTW thx for the replys
  23. S

    AMD CPU!!

    Which AMD chip & MB would you recommend for me to buy ??.
  24. S

    Will it work??

    Come on NFS4 help me out you in the know.
  25. S

    Will it work??

    WELL no Help !!! or should I just order the chip and take a chance!!!!!
  26. S

    NV35 pictures here

    Did you notice the graphic overlay (painting overlay) on the heatsink in the large picture view.Poor graphis work,hope the card works better LOL.
  27. S

    Will it work??

    I would like to know if any you guys can tell me if my P4T 533-C MB which dosen't support HyperThreading will work with the 3.06 GHZ which has HyperThreading technology!!!.BTW when I got the board it said 3 ghz + support.But the lastest bios update say other wise unless they mean HyperThreading...
  28. S

    ASUS MB P4T 533-C

    I have a P4T 533-C MB and would like to know if the 3.06 GHZ would work on this board,I updated the bois and it said to support a 3.06 it would need to have PCB Rev103 mb or higher. When I got the MB last june it said would support 3 ghz + or higher.I.m wondering if they Ment HyperThreading...
  29. S

    The US is evil.

    I get tortured ever day at stop lights with RAP so why can't they get tortured.
  30. S

    Intellimouse Explorer or Optical?

    quote:MS Wheel Mouse Optical and I think it's time to upgrade. --------------------> Optical <--------------------????????????????? I would upgrade memory at the same time,seems you need it also
  31. S

    problem with game raven shield (vid card?)

    Get a new video card befor you buy a game (a video card is about the same price as the game) your system don't support.It states right on the box what you need if you read the spec,s for your sys.
  32. S

    BF1942 gamers...new 1.31 patch released!

    We talk about video cards and MB and fast cpu,s to get fast Frame Rates to run Win XP pro !!.Come on get real,you know playing games is the most inportant part of useing a computer LOL.BTW He is a golden memeber so i,m sure he new that info you gave him befor he posted it,or I hope he did.
  33. S

    matching pair of RDRAM question

    Get two sticks of 128 megs (which will be cheaper) + 512 = 768 megs which is plenty,and if you useing win XP I suggest you set it to no pageing in vertrul memory and see the speed jump,it doen't haft to acces the HD once loaded with that much memory playing games.even 512 works great.BTW make...
  34. S

    What cpu runs the hotest no-matter what HS/FAN

    Macro2 QUOTE = P4s run hotter than people think. Intel placed the internal diode in the coolest part of the die. BRAINER Come on MAC what you talking about,if a rooms temp is 130 degrees F it dosen't mater where you put the diode. Boy it would be nice if people think once in a while.Most AMD...
  35. S

    System wont boot up after replacing cpu...

    Check your pin setting for reset and power on switch,also reset your memory seems when people take out CPU,s due to the hard clips to hold it it on it is easy to unseat a memory stick,or crack a trace in the motherboard,so start out with nothing but your Hard Drive,Video card.good luck
  36. S

    Tom Gets P4 to 4.1 GHz

    "Talk" it is so much cheaper than spending money.All I hear is next month and then next year but nothing never happens,but with all the PLUSES comming out you better hold off a little longer lol.By then you be to old to + it.
  37. S

    Rdram Dos Memory Test program

    I need a RDRAM Memory Test program like memtest86 or doc-memory.Any one know where I can get one ?.I lock upon the above testers.Thx & Merry Xmas
  38. S

    DDR 400 faster than RDRAM 533

    P4t533-C has 4 slots = 2banks for the 16 bit RDARM = longer tracers = a pipeline to flow the current to the cpu the Pt4 533 only has to slots for 32 bit Rdram.32 or 4200 speed.But both run no diff in speed.or if so you want know the diff,in real time use.
  39. S

    DDR 400 faster than RDRAM 533

    16 bit vers 32 bit 1066 RDRAM = Same diff,s in speed.Both are dual channel but 16 bit has a longer pipe line.If you have a program that would take 2 years to work out then you may see the diff,s in time.I ran a band width and it don't show squat diff,s in 16 and 32 both say est 4.2 gb/s true...
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |