Search results

  1. 16GB DDR3 is planned - please help me pick :)

    :thumbsup: Thank you for the facts!! This is exactly what I needed to see!! Karma points to you sir! If you lived in town I would take some of the money you saved me and buy you a beer.

  2. 2600k and p8p67 deluxe - any bets? any advice?

    Also, if you have input, I am looking for advice on how best to approach the 16GB solution... 4x4 or 2x8? My thread on the topic: http://forums.anandtech.com/showthread.php?p=32367247#post32367247 :)

  3. 16GB DDR3 is planned - please help me pick :)

    Hi all, I have the Asus p8p67 deluxe, a 2600k, and a Mugen 3 cooler. Can anyone recommend a set of sticks that totals 16GB? Is it better to go with 4x4GB or 2x8GB? THanks! I would like to run them at 1866MHz, so DDR3-2000 is a good bet. I'll take 1600MHz if I have to. I am...

  4. 2600k and p8p67 deluxe - any bets? any advice?

    That's fine, I am back at 4.5 for the moment too. I downloaded that copy from mediafire - the results are the same with LinX trailing IBT by 11% or so (comparing GFlops). Separately, I am trying to understand better how/why my Vcc changes so much. During a long test: and...

  5. 2600k and p8p67 deluxe - any bets? any advice?

    Have you tried running IBT 2.5.2? I have found it to more consistently run at predictable GFlops. LinX has sometimes without apparent reason slowed down into the 70-80 range.

  6. 2600k and p8p67 deluxe - any bets? any advice?

    I am not sure why all my LinX scores are low compared to IBT. I have checked that both are the new versions (0.6.4 and 2.5.2), doubled checked by downloading new copies, got same results. Both are basically GUI wrappers for the same tool right? I am not sure what diagnostic test to do next...

  7. 2600k and p8p67 deluxe - any bets? any advice?

    I am a bit confused about what you think is worng... I just did this experiment: 2600k @ 4.7GHz, 4GB RAM@1333, Win7x64_sp1 Can any of you show me how this scales as we get into larger RAM sizes? This is a pretty easy experiment to run. I only have 4GB though. To me it looks asymptotic...

  8. 2600k limit search -CPU voltage reporting offsets

    The offer is appreciated, but don't worry about it. I'll keep doing some experiments.

  9. 2600k limit search -CPU voltage reporting offsets

    Done, and thanks for the BIOS tips in relation to T offsets. I toyed with my 4.5-4.9 range last night: below points are min Vcc to be stable for ~7 minutes of LinX_AVX (~100GFlops): And the same data, but max Temps: And here is the round-up of my Voltage offset data with...

  10. Overclocking CPU/GPU/Memory Stability Testing Guidelines

    Another day, another round of data to report: AVX does make a big difference! Data point on AVX results, only difference between these two runs was AVX or not. Results: LinX: No AVX: 51.2 Gflops, Tmax = 62 Yes AVX: 100.6 Glops, Tmax = 67 Quite a difference there, thanks for the nudge.

  11. 2600k limit search -CPU voltage reporting offsets

    Data point on AVX results: Only difference between these two runs was AVX or not. Results: No AVX: 51.2 Gflops, Tmax = 62 Yes AVX: 100.6 Glops, Tmax = 67 Quite a difference there, thanks for the nudge.

  12. 2600k and p8p67 deluxe - any bets? any advice?

    My first take on the AVX usage in LinX was that it's an unnecessary, artificial benchmark. Are there any mainstream applications that use AVX? I am already getting ~100Gflops in IBT, so that seems to be a good sign as a benchmark tool. No? Regardless, for you, I'll do it; AVX inbound...

  13. 2600k limit search -CPU voltage reporting offsets

    Thanks for the confirmation and the correction (.08 != .008) My mobo software has a tool called Probe II but it seems to have the same .008 granularity. I do have a nice Fluke multimeter, if that is helpful at all? :\ All 3 of your data columns' #s are close to each other. I was...

  14. 2600k limit search -CPU voltage reporting offsets

    I have started using AI Suite to more rapidly determine the stable cpu voltage for a given speed (GHz). I am seeing a mismatch in what I tell Turbo Evo to use as compared to what CPU-Z is reporting. CPU-Z reports only seem to vary in .08 voltage increments, so there is a bit of masked noise...

  15. BF3 Beta reviews/impressions

    Pic taken while running BF3 beta last night on the other monitor. This CPU just chews it up and spits it out. 4 cores 8 threads of deliciousness. (Asus p8p67 deluxe, 2600k@4.7, 1.37v, GTX470sc, win7 x64) Now I need to think about a GPU upgrade... should I go SLI 470's? I am...

  16. A data point for you: BF3 on 4.7GHz i7_2600k

    Pic taken while running BF3 beta last night on the other monitor. This CPU just chews it up and spits it out. 4 cores 8 threads of deliciousness. :cool: (Asus p8p67 deluxe, 2600k@4.7, 1.37v, GTX470sc, win7 x64) Now I need to think about a GPU upgrade... should I go SLI 470's? I am...

  17. 2600k and p8p67 deluxe - any bets? any advice?

    1.480v sounds dangerously high for a stable 24/7 system. I am already stable at 4.7 (47x100) @ 1.375v. I will push it to 1.4v soon but I want to be careful and not break anything. For example, at these speeds I am getting up to 75C temps. I have heard before not to go above 70 for 24/7...

  18. Overclocking CPU/GPU/Memory Stability Testing Guidelines

    Would you guys have any idea about why the CPU voltage reported in CPUz might be different than what I am trying to set it at in the BIOS or in the OS utilities (AI Suite II, Turbo evo) (Asus p8p67 deluxe)

  19. Overclocking CPU/GPU/Memory Stability Testing Guidelines

    unsurprisingly, my chip seems to behave very similarly to yours Idontcare. I have been having a hell of a time trying to find a version of AI Suite II that will install on my machine. (Asus p8p67 deluxe, win 7 x64) Here is my current high stable point: taken while running BF3 beta:

  20. Overclocking CPU/GPU/Memory Stability Testing Guidelines

    Awesome! I will do this after I install the new cooler. I'll make a public google doc and we can all add our data, and we can see a line for each persons CPU. I am curious about how mine lines up against others here, and also how wide the standard deviation is. Do you know, in your rapid...

  21. 2600k and p8p67 deluxe - any bets? any advice?

    Update on progress so far. You guys are good at those guesses :) so far 4.5x100 1.30v 65C note the two different LinX runs - one with 4 threads and one with 8 - do those GFlops look reasonable for my speed? 2600k@4.5 I am installing an updated cooler tonight, so I will have updates on...

  22. Overclocking CPU/GPU/Memory Stability Testing Guidelines

    Thanks for putting all this amazingly helpful info in one place! Do you have thoughts on Real Temp vs. Core Temp 1.0? My next steps are to see how low I can get my CPU Voltage at 45x100. Currently I am stable at 1.30v. Do you have suggestions on what increments I should be lowering at...

  23. Excellent bootable ISO for stability testing

    Thanks!

  24. Excellent bootable ISO for stability testing

    I have been using UBCD v5RC1, which has mersennse prime v24. Also, StressLinux sometimes, because it also has the same app. Would you all agree that this is just as good as running Prime95 in Windows? Or do you have a better solution for testing a 2600k (or other sandy cpus)??? THanks!

  25. 2600k and p8p67 deluxe - any bets? any advice?

    So far so good - I ran Linx (all) for 20 passes and it maxes out at 52 degrees Cel. (This is at 44x100 = 4.4Ghz) Speed Step does not seem to work so far but I am not concerned. Does anyone have a good recommendation for a DVD ISO image I can boot to and run Linx, etc? The UBCD tests do...

  26. 2600k and p8p67 deluxe - any bets? any advice?

    You're right, it really is just a mediocre cooler when it comes to performance. Xbitlabs often uses the Mugen2 for their mainstream OC reviews, so it seemed like a safe bet. Do you (or anyone else) have any suggestions on a cooler to use that will fit my case (antec 300) and mobo (p8p67...

  27. P8P67 Deluxe 2600k - 470oc 8800GToc mixed SLI?

    Most of my gaming will likely be at 1680x1050. I know there are a few showcase games that a 2nd phys card can help for but I was wondering if any coming AAA titles get some help too. I like the way your sig thinks ;) I have also a 120Hz display and the Nvidia 3d setup. I dont actually...

  28. 2600k and p8p67 deluxe - any bets? any advice?

    Sorry for the double post - can you give me a rough idea of how long those 20 passes might take? 3 hours? 3 days? I've been out of the OC ring for a couple years and my standards are old history.

  29. 2600k and p8p67 deluxe - any bets? any advice?

    This is a great point, but I didnt want to scare people away from my post with too much info. I have learned my lesson the hard way in the past about PSU quality. This time around I have an Antec EarthWatts 750w. It was a random gift so I am hoping it will work for now. I am happy to...

  30. P8P67 Deluxe 2600k - 470oc 8800GToc mixed SLI?

    Thanks for confirming this!!! Are there any modern popular multiplayer games that will take advantage of the extra physx capability? BF3????

  31. P8P67 Deluxe 2600k - 470oc 8800GToc mixed SLI?

    Can I get some advice on whether it is worth my time to put both of my graphics cards into my new rig? #1 - 470 (evga superclocked) #2 - evga 8800GTS 320MB OC into my new rig: Asus P8P67 Deluxe SB 2600k Mugen 3 (SCMG-3000) DDR3-2000 (Gskill Trident 2x2GB) Antec 300, with 2x extra...

  32. 2600k and p8p67 deluxe - any bets? any advice?

    :whiste: Given that I dont want to push the voltage above 1.4 for the first few weeks, I was just curious really what my odds are of reaching 5Ghz stable....

  33. 2600k and p8p67 deluxe - any bets? any advice?

    Care to take and bets on how high I will get (stable) with the below parts? I am curious because this is the most research and $$ I have thrown towards a system to date. Asus P8P67 Deluxe SB 2600k Mugen 3 (SCMG-3000) DDR3-2000 (Gskill Trident 2x2GB) Antec 300, with 2x extra Scythe...
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |