Search results

  1. V

    Please: suggestions on heatsink and motherboard.

    I have picked up the following: AMD Mobile 64 3000+, Biostar GForce6100M MB. and a refurbished X800 PRO video card. The problem is, AMD CPU is OEM w/o heatsink and I plan to build the system in a Small-Factor case, such as Antec Aria or similar. Any suggestions on the heat sink...
  2. V

    700m 1.6MHz Pentium M runs at 589MHz

    Thanks man! the problem is that I feel it's not as fast as I thought compared with my old Celeron :(
  3. V

    700m 1.6MHz Pentium M runs at 589MHz

    Tested with CPUZ it shows the CPU is running at only 589MHz? Anyone has the same problem? Thx
  4. V

    NF7S v2.0 printing problem, please help

    thanks! I did all you suggested. No go :( However, I did find that I have to plug in USB to "active" the printer then turn it off then on, the printer will work in this way. so... strange... Could that be a problem on the mother board? thanks!
  5. V

    NF7S v2.0 printing problem

    Everytime I turn off the computer, the printer won't work. Nither on paralle port nor USB. I have to keep on rebooting both the computer and printer, and at some "unknown" point, it will work again. So far I haven't found any particular action that can fix the problem beside rebooting again and...
  6. V

    NF7S v2.0 printing problem, please help

    Everytime I turn off the computer, the printer won't work. Nither on paralle port nor USB. I have to keep on rebooting both the computer and printer, and at some "unknown" point, it will work again. So far I haven't found any particular action that can fix the problem beside rebooting again...
  7. V

    Help on new system (NF-7S, AMD xp2400+ mobile)

    bump for myself :)
  8. V

    Help on new system (NF-7S, AMD xp2400+ mobile)

    I have reinstall the XP, fresh reinstall. But the problem is still there, when I run emule, after couple minutes, XP freezes :( Not really freeze, but it will take a minute or so if you want to open anything. In the take manager, it shows emule " not responding". There is another problem. When...
  9. V

    *** Official ABIT NF7/S (nForce2) Thread ***

    worked!!! Dual channel mode now... However, when I run CPUZ, it shows ram runs at 200MHz instead of 400. Also the FSB to DRAM ratio is 1:1 :| where did I do wrong many thanks!!
  10. V

    *** Official ABIT NF7/S (nForce2) Thread ***

    will this still work if I configure the FSB and multiplier by myself?
  11. V

    *** Official ABIT NF7/S (nForce2) Thread ***

    cool, thanks man. will try it tonight
  12. V

    *** Official ABIT NF7/S (nForce2) Thread ***

    I'm trying to setup this board with Kingston PC3200 to run at dual channel mode. How to do that? Thanks!!
  13. V

    Any comments on Fortron Aurora 350W PSU

    Interesting, according to the test in Anandtech, this PSU is actually quiter than TP430
  14. V

    Any comments on Fortron Aurora 350W PSU

    How about the LED version? I don't see any difference except the LED and 75 cents in price.
  15. V

    Any comments on Fortron Aurora 350W PSU

    Normal version? Is it this one: http://www.newegg.com/app/ViewProductDesc.asp?description=17-104-966&depa=0
  16. V

    Any comments on Fortron Aurora 350W PSU

    Will this be enough for my config: xp 2400+ (will oc) 2x512 pc2700 1 10G 5400RPM HD 1 80G 7200RPM HD 1 HP 4x2x8 CD-RW 1 ATI 9600 PRO 256MB Video card 2 80mm case fan Other good, quite and CHEAP PSU? or I should spend $22 more on 400W version?
  17. V

    Wait or buy now?

    Shall I wait for the 9600XT price drop to somewhere around $100? or jump in right now? I'm not a hc game player, but want to play something like MOA etc. Any suggestions? On order: AMD XP 2400+ Mobile ABIT NF7-S Thermaltake HSF Waitting: PSU :)
  18. V

    9700 Pro or 5900 Ultra

    Agree, sell both! I'm sure the video card price will drop very soon since both Nvidia and ATI pop up their new cards. period
  19. V

    An old topic, Antec or Fortron PSU

    Just a PSU, I got a Antec SLK2600 case. It's not quite at all :( But Sonata costs a lot....
  20. V

    An old topic, Antec or Fortron PSU

    Looking for somthing quite, quiter... But cannot afford water cool. My setting: AMD 2500+ (will oc...) 1G PNY RAM 1 80G Maxtor IDE drive 1 10G Quatum IDE drive 1 HP CD-RW no video card yet, but plan to get hands on either a 9600 or 5700 My question: will 350W be enough? or I'd better go for...
  21. V

    Fortron 400w or Antec True430

    anyone vote for Fortron 350W?
  22. V

    Upgrading my old, old PC, need you guys help :)

    How about this PSU: Fortron FSP550-60PLN 550W EPS12V PSU
  23. V

    Upgrading my old, old PC, need you guys help :)

    Yeah, will definately check the PSU. I believe I need one and I'm going to OC a little bit. Thanks!
  24. V

    Upgrading my old, old PC, need you guys help :)

    "Overclockers are at the best skilled tweakers, at the worst straightforward cheapskates: the crux of the art is turning lead into gold, tortoise to hare, bottom-of-range to turbo deluxe" Like your signature :)
  25. V

    Building a New Comp - Which CPU?

    Does the Mobile 2600 have "barton" core? what's the main difference between Mobile and non-mobile version?
  26. V

    Upgrading my old, old PC, need you guys help :)

    What brand of psu do you suggest? I'd like a quiter one. I'll update my RAM later b/c the prices are so high now.
  27. V

    Upgrading my old, old PC, need you guys help :)

    help please....
  28. V

    What is the best Sub $90 Nforce 2 overclocking board?

    hmmm, Biostar M7NCD-Pro is only $35 refurbished in newegg.
  29. V

    What is the best Sub $90 Nforce 2 overclocking board?

    Your config please and the CPU tempreture please
  30. V

    What is the best Sub $90 Nforce 2 overclocking board?

    Newegg has NF7-S for 85.99, it's below 90 :)
  31. V

    Upgrading my old, old PC, need you guys help :)

    I'm upgrading my old Celeron 500 PC now. I have already got a Antec SLk2600 with 300W power and I want to go for AMD this time. What I have: 1) 300 power (new) 2) 2x512MB PNY PC2700 RAM (new) 3) one 10G ATA100 HD (used) 4) One 80G Maxtor ATA133 HD (used) 5) Plenty fans @ 80mm :) What I think...
  32. V

    Anyone take the ATI RS350 plung for the P4 yet ???

    Not officially shipped yet I guess. :) BTW, any information on your OC 2.8E? I'm waitting for a new 2.8E coming tomorrow and want to choose a proper MB for OC. THX
  33. V

    ok confused 2600+ M or 2500+ Barton

    confused about these two modles: 1) http://www.excaliberpc.com/product_info.php?cPath=178_186&products_id=3512 2) http://www.excaliberpc.com/product_info.php?cPath=178_186&products_id=3660 $2.00 difference? what gives. New eggs...
  34. V

    Which P4 to get for ASUS P4R800-VM mobo

    no, the mobo has ATI IGP9100 chip set...
  35. V

    Which P4 to get for ASUS P4R800-VM mobo

    Nope, as far as I know the MB is very strict on OC. I got it for it's integrated video card (Redeon 9200 based). Also, I only have 2 stick of 512MB PC2700 memory and only 300W power :( but still many thanks for the reply!
  36. V

    Which P4 to get for ASUS P4R800-VM mobo

    Guess no one likes Intel here hmm?
  37. V

    Which P4 to get for ASUS P4R800-VM mobo

    Got Asus P4R800-VM for it's price, $40 refurbished from newegg. It comes with a decent video chip if not great. Which CPU shall I get to make most use out of it? P4 2.4A, 2.4B or just a 2.0A? Any suggestions? or other mobo gives better OC perfermance with the same ATI chip set? thanks a bunch!!
  38. V

    *** Official ABIT NF7/S (nForce2) Thread ***

    I heard that the Kingston memory will not work on dual channel setting.
  39. V

    Is the Antec Sonata available in any other colors other than glossy black?

    Zepper, would you please give more information on which case(s) are equivalent to Antec Sonata? especially cheaper and quiter. thanks bunch!
  40. V

    ok confused 2600+ M or 2500+ Barton

    2500+ has the best value IMO
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |