God damn, believe it or not I am getting the exact same prob.
I had 1.2 in mobo and wanted to try another. Just got another 1.2 Tbird (200fsb). I took out the old tbird and put the other tbird in, turned it on and nothing. All I get is fans, lights and hdd spining up. Does not post and nothing...
Hello,
Would just like to know some overclocking speeds memory and core for this card, 64mb version would be better but hey I guess any GF 2MX card will do.
Oh yeah is it with the stock hsf setup?
Hi,
Will an ATA-100 HDD work on my Abit KT7 which only supports ATA-66?
Im assuming it will only be able to run at ATA-66 speeds if it does work.
Thanks
I have a BH6 with Celeron 300A and 98Mb SDRAM,
Currently I have a Viper V550 16Mb installed and all works fine.
i then remove the card and Install a G200 8Mb SGRAM and reboot. The computer boots and the speaker does 1 long beep and then 3 short beeps, and then nothing happens after that.
If...
I have this motherboard and I am wondering what memory I have to use.
Im going to put a K62-450 on it and I think that has a 100Mhz FSB. The motherboard has four memory slots (2 168pins DIMMS and 2 72pin SIMMS) Am I able to use the 72 pin SIMMS (EDO) with e K62-450 or do I have to use the...
I have a Duron 700 trying to run at 900 on an Abit KT7 running Windows 98.
"Msgsrv32" performed and illegal operation when I try to push the 700 to 900?
Why does it do this? Could it be the OS cos I only have windows 98 1st Edition on.
Some help would be nice
I have a Diamond Viper V550 on an
Abit KT7
Duron 700
64Mb RAM
Windows 98 1st edition
DirectX 7
i have loaded the latest Detenator driver and then restarted windows, after the splash screen the screen goes blank and a curser iat the top left hand corner flashes???
Anyone know whats wrong ?
Thanx
Hi
I have a Celeron 300A on an Abit BH6 mobo, dont know how fast my ram is though?
I change the settings of the system bus throught the bios to 100 and then save the changes, that goes fine. It does the memory test and thats fine also. But when it passes the Windows 98 (1st Edition) splash...
I am trying to run Q3 or UT in OpenGL with a Diamond Viper V550 TNT and when I try to run Q# or UT the monitor goes into sleep mode anybody know a way around this or know what I'm doing wrong??
I am trying to run Q3 or UT in OpenGL with a Diamond Viper V550 TNT and when I try to run Q# or UT the monitor goes into sleep mode anybody know a way around this or know what I'm doing wrong??
My Floppy drive is using an MS-DOS compatibility mode file system.
does anybody know a way around it??
I need back to normal as soon as possible.
Thanks
There should be no reason for it not too work at all.
Somebody correct me if I'm wrong but the FSB will not affect the ide(eide) channel at all.
Depending on what the burner or DVD or any drive for that matter will support (ie: ATA-66) and the motherboard can support it as well the drive will...
Sound Blaster Live! X-Gamer
+
Altec Lansing 56
This any good for playing games, listening to music and maybe watching DVD's?
Any recommendations would be great.
WOOHOO!!!
About time AMD makes a big leap forward. Finally after god knows how many years we can see a new leader and hopefully see cheaper and faster CPU's ever than before.
Can't wait - I think I might hold a while till they make an announcement on what they're doing first before I go buy...
Certainly looks as though it does a better job than the fan you had.
How did you connect the on/off switch? Did you use just one switch for all three fans or a seperate switch for each fan.
Those metal grills would finish that new HDD cooler off well.
Keep up the cool work :)
If I were to run a 600 Duron and O'Clock it to 931 can I just simple change the multiplier to 7 and keep the FSB @ 133?? Do I have to change the voltage?
Hi
Just wondering if 5 case fans
3x 80x80 - 2 rear (sucking) , 1 front (blowing)
2x 120x120 - On the side blowing on Graphic Card & CPU (blowing)
plus the power supply (suck)
is this overboard or more the better.
Also any recommendationa on how to cut two holes for 2x 120x120 in the...
So after I connect the goolden connectors with the graphite pen I can then chage he multiplier within the BIOS.
What kind of cooling should be talen into account?
THANKS
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.