Search results

  1. H

    Most expensive CPU in the world, Curiositys RAD750.

    But the question that needs to be asked is... Is the IHS soldered to the die?
  2. H

    Your Favorite Graphics Card of All Time

    The 3gfx Voodoo 2... That thing was the granddaddy of SLI.
  3. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    Since we are on the subject of TIMs, let me tell you that if you plan on using Liquid Metal Ultra, make sure you don't plan on messing around with your setup in a long time, unless you want to re-lap your IHS and heatsink everytime you take it apart. I had my LMU on for a week and after taking...
  4. H

    Best config for an H100 in a 600T case

    Both the H100 and H80 are closed loop systems, which means you can't take it apart to feed the tubes through the tube holes. You would have to dremel up a hole in the case large enough to fit the waterblock through. - Grammar *censored*, this was sent from my phone.
  5. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    There is a reason why Intel calls them heat spreaders and not die covers or die protectors. - Grammar *censored*, this was sent from my phone.
  6. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    Yup and the results were astonishing. After 24 hours, the IHS is as firm as it was when it came from Intel. And if you want to de-lid it again, you can use a blade to cut it too. - Grammar *censored*, this was sent from my phone.
  7. H

    Remove iGPU?

    The way I see it is, having that iGPU is like having a nice backup video in the event my GTX680 hits the shitter for some reason. Nice to have something to continue using your PC until a replacement videocard arrives. - Grammar *censored*, this was sent from my phone.
  8. H

    Remove iGPU?

  9. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    We are the guinea pigs! :D This silicone is low odor and I used a minimal amount. As a matter of fact, I can't smell a thing. I'll tell you tomorrow if it holds together well, though visually, you would never think that CPU was de-lidded.
  10. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    I just finished glueing my IHS to the pcb with some automotive, black silicone. It's the Permatex Black Silicone Adhesive Sealant to be exact. I placed a thin bead all along inside edge of the IHS, the edge where there is always leftover glue from the original Intel adhesive. When I pressed the...
  11. H

    Best config for an H100 in a 600T case

    I have to agree with Dmoney. The H80 is a good option when you have a case that won't accomodate the H100. I have a Cooler Master Cosmos S and it fits perfectly. - Grammar *censored*, this was sent from my phone.
  12. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    Thanks for the response... So long story short, it's anyone's guess? lol
  13. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    Thanks man and I'm still shocked! Just for shits and giggles, I pumped 1.52v to it and was able to boot up to Windows at 5.2Ghz and temps under full loads were mid 70s steady on Prime95. I know that it would probably not be stable and vcore will probably need a few more juice but I think it's...
  14. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    I've been running my 3770K with the IHS resting on the die for almost a week now and I can safely say it's a non-issue. Performs perfectly. - Grammar *censored*, this was sent from my phone.
  15. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    LMAO! Nice!!! We still have Crown Vics and now some Dodge Chargers... I have and prefer the Crown Vic... More spacious and comfortable. :thumbsup:
  16. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    Oh I forgot about that one! I need to check because I also remove a bunch of default stuff from my Windows installation as part of my optimization process. - Grammar *censored*, this was sent from my phone.
  17. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    Right now, the average temp for CPU Package stands at 71.4C. The highest average temp for the hottest core, which is core 3, stands at 71.3. I guess the CPU package will be as hot as the hottest core. which makes sense. As for the package being .1C hotter, you have to give the software some...
  18. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    Finally back home from court but I have to leave at noon again, Dammit! lol Yes, I am a cop but no, we don't drive Hondas. LOL Anyway, I turned the PC on and so far, Prime95 has been error free for the past 40 minutes while running the large, in-place torture test with the following settings...
  19. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    For those having doubts about the numbers I posted last night, let me remind you that I am de-lidded and both the top of the IHS and the bottom of the H100's water block have been lapped to almost a mirror like shine. Liquid Metal Ultra was used on both the die to IHS connection and IHS to water...
  20. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    Why you say that? - Grammar *censored*, this was sent from my phone.
  21. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    LinX test (21000 | 20 runs) with a voltage of 1.40v @ 4.9GHz: Core 1 - 60.6C Core 2 - 63.4C Core 3 - 68.2C Core 4 - 61.3C CPU package - 67.8C I have no doubt in my mind that the thermal issues with Ivy Bridge is due to the TIM route Intel decided to take with these CPUs, instead of...
  22. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    Bonzai, I'm running LinX again while I type this... 4.8GHz @ 1.31v Right now it's done 11 of 20 runs and the temps are: Core 1 - 57.4C Core 2 - 58.3C Core 3 - 64.0C Core 4 - 57.8C The highest temp reached so far, was Core 3 and it's maxed at 70C! It's been low to mid 60 through out the test...
  23. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    Well guys, I couldn't resist and took the plunge. I used Liquid Metal Ultra as this: CPU DIE>>LMU>>IHS>>LMU>>H100 The system booted up and it's running normally. Here is my system: ASUS P8Z77-V Intel i7-3770K (de-lidded) EVGA GTX670 FTW 8GB (2x4GB) Samsung Low Profile 30nm 1600 DDR3 Corsair...
  24. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    http://www.overclock.net/t/1258439/ivy-bridge-3770k-heat-spreader-thermal-grease-testing Seems like someone has already tried the Liquid Metal Ultra on the bare die and it survived to tell a tale. Sorry if you all have seen this already.
  25. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    Good question. I would like to know as well since I'm running right now with the adhesive, so my IHS is resting on the die.
  26. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    Fed-Ex guy just dropped off my Coollaboratory Liquid Metal Ultra!!!!! :D:D:D I tell you what. I'm gonna email the guys at Coollaboratory and see what they say about using LMU directly on a cpu die...
  27. H

    Is 3770K's core #3 on a caffeine rush?

    LMAO Great analogy... Thanks for explaining.
  28. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    In other words, I am neck deep in turbulent waters without even knowing? hahaha Well, IDC, I will let you be the guinea pig and try out LMU on the cpu die. :cool: As for the IHS resting on the die, does that mean that we should not use the typical "grain of rice" procedure of putting TIM in...
  29. H

    Is 3770K's core #3 on a caffeine rush?

    Very interesting, IDC... So it's because it's jammed between two-three other cores or for some other reason? Give it to me in laymen's terms. haha :D
  30. H

    Is 3770K's core #3 on a caffeine rush?

    Oh wow, that makes sense... Coincidently, I was looking at AIDA64's statistics and the two lowest average temps belong to cores 1 and 4. hahaha Looking at that pic of the cpu, I really wished Intel would make a NON-iGPU version of the i7-3770K. Reminds me of Microsoft trying to shove IE down...
  31. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    Man, I'm so desperate to get my Liquid Metal Ultra! Speaking of which, is LMU safe to be used on the cpu die? Or should I only use it on the IHS to H100 side of things?
  32. H

    Is 3770K's core #3 on a caffeine rush?

    Is it normal for core #3 to always be the one with the highest temps on full load? On average, core #3 is about 5C higher than the rest of the cores. Just wondering if it's normal or my 3770K is just acting weird... You know, I'm still have 3 weeks left on my Amazon 30 day return warranty, so I...
  33. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    IDC, you sir, are a class act. This is by far one of the best and most interesting threads I've ever read with regards to our overclocking vice. Just so you know, I am also running a butt naked 3770K. It's been de-lidded and glue cleaned away. I don't know if you noticed, but if you place the...
  34. H

    Best config for an H100 in a 600T case

    I think the whole push/pull thing is overrated. I had my H100 in a push/pull config and due to fan noise, I decided to get rid of two fans and just left the other two on the outside of the case in a pull config. Little did I know my temps would drop an average of 10-15C degrees! With push/pull...
  35. H

    Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

    LOL Duct tape can fix that - Grammar *censored*, this was sent from my phone.
  36. H

    Overclocking on an ASUS P8Z77-V?

    I'm old school when it comes to overclocking, you know, increase voltage, frequency and call it a day. But now with this board, there are so many variables that it is a bit overwhelming. As such, I would like to start with an automatic overclock done by the board so I can use as a starting...
  37. H

    Help me setup airflow...

    Hmmmm I see your logic and it does make sense. I will give that a shot. Thanks!
  38. H

    Help me setup airflow...

    Ok, here is the situation... I have a Cooler Master Cosmos S case and I need to maximize airflow but there are so many options or routes I can take that it's driving me nuts. So I come to you guys and ask you share your opinions. Here is my current configuration: (1) Corsair H100 installed on...
  39. H

    Replacement fan for Cooler Master Cosmos S?

    oh ok, thanks!
  40. H

    Replacement fan for Cooler Master Cosmos S?

    Anyone know of a 200mm fan compatible with the Cosmos S? I'm talking about the huge fan on the side panel. Case is 4 years old so, warranty is long gone and Cooler Master's site says fan is no longer available. Thanks for the help! - Grammar *censored*, this was sent from my phone.
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |