I have many directories that are filled with many small files on a backup drive.
These directories are archives of files just serving as a backup.
How do I consolidate these files? Winrar, zip, 7zip, something else?
Some directories are 128gb. I am a little hesitant creating 128gb rars.
Is...
It had to be the game data that was compressed. Where else would it find 4GB of data out of the total 12GB used?
Game loads textures, doesn't use them for a while, windows starts compressing it, then you get delay once those textures are needed. I discounted the fact that there was a delay to...
With my results, I feel that input lag has gone down significantly. I do not have the tools to measure it, but I feel like I shaved off 20ms.
Sure your eyes cannot see the difference, but you feel the difference just moving the mouse.
Input lag can be significant, even with fast response...
I will be observing my commit overtime. If it rarely exceeds 24gb, then I do not want compression for sure. They can say what they want, but compressing 4gb takes a chunk of power, yet if my use rarely exceeds phsyical available memory, then it can be completely avoided. If I find myself...
Thanks !!
I know that learning how to read the memory tab wont change anything, but I'd rather not be ignorant and try to learn.
Just like additional gauges on a car. Sure gages like oil pressure, boost, knock, A/F ratio, trans temp are unnecessary to the general population, yet they are...
This is a two part question.
I'd like to disable compressed memory. In my opionion ram is supposed to be blazing fast. I do not want to wait for the CPU to decompress whatever it compressed or waste CPU power on that task. From what I read on google, I would have to disabled the super fetch...
Here's the situation.
Display1: intel gpu (vga)
Display2: amd gpu (dvi)
If display 1 is set primary, all 3D/games are rendered using the intel gpu.
If display 2 is set primary, all 3D/games are rendered using amd gpu.
Now if display 2 is set primary, I can drag a 3D app/game from display 2...
My 128gb SSD is kinda a clusterfsck o_O
This laptop started with windows 8, upgraded to 8.1, upgraded to 10.
My partitions are as follows:
1) 300MB Recovery Partition
2) 260MB EFI System Partition
3) 110GB Windows Partition
4) 350MB Recovery Partition
5) 6.8GB Recovery...
I stream my PC to my tablets & laptops. With the latest crimson drivers from AMD, they have managed to break hardware encoding via their GPU's! GG AMD :thumbsup:
Instead bogging down the CPU with CPU encoding, I'd like to use Intel Quicksync iGPU acceleration. I tried it and it works great...
I don't even know if there is a way to repair this issue. I even made a video, please check it out.
I have two windows installations on two separate drives.
disk 0 - windows 8.1
disk 1 - windows 8.1
Both windows boot as disk C, with the other OS always as disk D.
Everything works fine...
Do you have the same router? What fw? Seems I am missing that option. Bellow are my options:
Enable FTP
Allow anonymous login
Maximum number of concurrent connections
Character set on FTP Server
I did disable mycloud cloud access in its GUI and do believe it works, but just tried to...
I have an Asus RT-AC68U router, but I assume most of the recent models carry the same interface. Here is my issue.
I started both the windows samba and ftp features for an attached USB to this router. The issue is that the ftp server the router started is being made public to wan side and I...
I solved it the issue. It was because that the disk lettering was already enumerated for the other partition on the initial installation. You couldn't change it in disk management since it was in use.
I opened the registry on disk d remotely.
I went into HKEY_LOCAL_MACHINE > SYSTEM >...
I have a single drive partitioned into 2.
I installed windows 8.1 onto partition C.
I cloned partition C onto partition D using EaseUS Backup.
I used easyBCD to add a boot entry for partition D.
I know if you do two separate installtions through the installer, windows makes the...
The my cloud is a recently released product from WD.
I was reading reviews and it seems like you have to use WD's companion app to manage files.
Does anyone here have/ or has used one know if it could be used a regular NAS and accessed normally through windows explorer without the...
I figured as much.
Can you create just allowed credentials without creating the entire account? That would be cleaner since I do not want other persistent login choices or the corresponding users/document folder tree.
What should I do in this scenario?
Lets say there are 3 computers connected to a network. They all have password protected sharing on, and the following passwords.
User1
Pass1
User2
Pass2
User3
**NO PASSWORD**
With this setup, everyone can access each other except no one access user 3...
I was wondering have the ATOM/i3 NASboxes been replaced by lower power/cost ARM solutions.
Do they have a feature where they are powered off until they get a WOL ping request?
And are there NAS boxes that have apps so I can access them remotely from the internet.
I have found a newer version of synaptic drivers. While these drivers were not specifically made for my laptop, they do work alot better.
Everything I restart, windows uninstalls these newer drivers and installs the newest ones that ARE made for my laptop.
Ive tried disabling this feature but...
I said smoother not faster. I have a 7970 in my pc.
Scrolling in chrome is done a quarter inch at a time using a mouse. Fine scrolling flickers the screen.
On my laptop, the smooth scrolling is visibly notchy as well. I don't know if that's a synaptic issue or the power of the igpu.
On the...
First I want a better OS than microsoft, octo-core, then power efficiency in that order. It's sad that surfing the internet on my phone is smoother than my computer.:oops: (Not page load times, but gpu accelerated scrolling)
But tablet/laptop products should run at the max speed possibles...
just a trunc command and its all good.
The only place I see integers being used is where the modulos command is needed, but I would be pretty sure it could be baked into an efficient instruction. With doubling the calculation units possible, I still am seeing a netgain.
For imprecision...
got it.
Sidequestion: Are integer instructions much faster that floating point?
IE: 4/4 = 1 or 4.0/4.0 = 1
Would it not be more economical to make all units FP, doubling all the speeds we have today?
I've been out of the loop with AMD. I'm still rocking a E6600 @ 3.4ghz on my desktop and i5-3xxx on the laptop.
I know intels hyperthreading is acutally 2/4 cores with some virtualization magic to make it have 4/8 threads. With this hyperthreading the speed is still roughly 2/4 cores, with...
the room is what the room is.
I can't really do anything about that. I was thinking of putting the sub against the left raer of the small couch in the rear of the picture.
If that didn't work then against all the way to rear left cornefof the room with the sub facing the coach...
From my understanding binning is quantified by ASIC quality.
Low quality means low leakage currents which mean that lower heat is produced and the ability to use lower volts.
High quality means high leakage, which means higher heat, but the ability withstand higher volts and higher overclocks...
I haven't bought the speakers yet, but I actually was looking at energy classic speakers due to their 4" depth.
The room is pretty big, 25' x 25' that's why I would like a bigger sub than the one that comes with the energy speakers if possible.
I attached a picture of the room.
If you look...
I don't have any front speakers right now, but this frequency hole is not going to change no matter what room if I want to use a large sub.
Ultimately, I still want that low end rumble and no small sub can provide it.
I looked, but no fronts that are small and hit 80hz are available. The...
I want new speakers for a 5.1 HT setup. I can't do large speakers in the front (depth > 5") or floor standing tower due to living room constaints. On the other hand I like DEEP bass, and want a large sub.
The issue with this is that large subs typically do the 20-80hz frequency well and that...
Irregardless is not a word but it is commonly used in dialect. I wrote my post as I would speaking to someone.
In my professional writing I made up a fair share of words too.
Yea, except the fact that I never got hurt. You think he was going full power? He could of easily killed the kid.
Have you ever heard of negative reinforcement? Physcological punishment is has the same effect as does physical punishment.
From my point of view, I'd rather get the belt...
My parents whooped my ass when I misbehaved too. The kid will learn to behave properly grow into a better person. You didn't see both sides to this story.
-Removed-
Guess what. I didn't grow up to become a sensitive hippy or a defect to society. Instead I finished my bachelors in...
I replaced my synaptics touchpad driver on my laptop with a newer leaked one I found on the internet. The leaked one gives me 3 finger swipe forward/backwards functionality. A very big PLUS.
Windows 8 keeps reverting to the old one:thumbsdown:
Is there a way I can leave automatic driver...
I forgot about the fact that they moved many of the motherboard components onto the chip itself.
The higher TDP makes sense now, and yea clockspeed != performance.
Think about it. Would you rather have a 3.6ghz pentium 4 or a 1.6 ghz i3? We will just have to wait a see. I'm expecting...
I know intel dynamically underclocks when not in use, but does anyonoe have an estmate on the power consumption difference between idling a 77w TDP processor vs 35w TDP processor?
Currently my ivy bridge ultrabook draws some ridiculously low ammount of power when idle, yet my e6600 rig draws...
I think its a little sketchy. Currently ivy bridges TDP is 17 - 77w depending on the model.
Intel is all about power efficiency with Haswell, so why did the range jump up to 35-88w?
Source: http://ark.intel.com/products/family/65504
The lower power versions were already rumored to be 7-10...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.