My inkjet just crapped out on me, so im looking for a new printer and will probably go with a cheap laser. Was surfing the boards and net and narrowed it down to pretty much the Minolta 1100L and the Samsung ML-1210. I was just wondering what the pros and cons of these 2 printers were, and...
anyone knows how the 40 cfm ys-tech sounds like? I mean anything other than just loud. I can't stand my delta anymore but the 27cfm fan is not cutting it on my 1.2@1.4 tbird.
Those prices are terrible. Rio 600 is selling at compusa for 99.99 I don't mind dealers posting as long as its "hot deal". Those prices, on the contrary, are just damn cold.
just got it set up at raid 0 with 2 15gig 7200 rpm quantum fireballs under win2k. Ran Sansis 2001 benchmark and got roughly 21,000??? Doesn't sound rite at all. Any suggestion?
I did install live bios but when I ran it, it said that my board does not support it. Also the section for this board at MSI does not have any bios listed. Site is underconstruction.
Can't seem to find a bios upgrade for this board. Lowest clock multiplier is at 8.5, so I need a bios that'll give me something a bit lower to work with. Anyhelp or suggestion on a better bios would be appreciated. Thanks
I ran to a very odd problem on this card. When I overclock my tbird 850 above 1 gig, the audio comes out in spanish. Anyone know how to switch it back to english?
well, I picked one up at OD yesterday. It ranged up 89.99. But the shelf price was 49.99. I was told that the shelf price was wrong and it's there by mistake. In anycase, I got it for 49.99 because they honored the shelf price. And the coupon worked after they entered it manually. Also...
Just got back from Staples. Picked one up and my friend got the last one. Came out to be $129.84
with the $30 coupon code. Hope I'll get the $50 rebate. Anyone know how good Acer is about rebates? Anyways, I'm going to try and see how good this drive is in a couple of minutes.
So, anyone figured this one out yet? I just received a pro2a and my duron 600 is a no go beyond 8.5 multiplier. It ran 900 easily on the kt7. Maybe I should have gotten the kt7.
Thanks Rab,
In any case, I've ordered one of these motherboards and a case from compgeeks. I'll see how the new board works out with the msi and my 633 (use the p2b for my old but dependable PII 400). If that still doesn't work then I will buy the abit slotket. By the way, how hot is the...
Rab,
thanks for the comments. but it may be that this chip is not going to go much higher. I've tried increasing the voltage up to 2 but same problem. oh well. Thanks again though.
darkclouds
thanks Rab,
it seems that i can get it to boot up at 83.3mhz but can't play any game on it. It'll freeze. I'm using the viper 770 ultra. It'll also boot at 100mhz but freezes at win98 screen. Could this be a cooling problem? Thanks again.
Rab,
I have a p2b also and is trying to run my cel 633 at 950. I'm having trouble with it booting. If you've got yours going, let me know how. I've tried both the 1012 and 1013 bios. Also using an msi6905 slocket. It seems to be stable at 712 only. Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.