<< check the system you want forwarded to and make sure it has the static ip 192.168.1.100 >>
ahh so whatever IP i select for Port Forwarding has to be setup for a static ip...so let's say that my @home main machine has an ip address of 24.X.XX.XX and this is the machine that I want the ip...
no errors. just sits there trying to connect...I was trying to isolate the issue to configuration of the Linksys Router (port forwarding) or something else...
Setting up FTP server for first time behind my Linksys Firewall. I've disabled DHCP under the DHCP tab in my Linksys Router Config Setup, and I've forwarded the port to 192.168.1.100. I've setup a test "admin" user with full rights in the ServU setup but I can't connect to the FTP from...
Have an SB Live Value, and would like a convenient way to plug in my headphones w/o disconnecting the speaker lines in back of the Live card. The SB Live Drive seems ideal but cost too much and have to purchase the whole package which I don't need.
Has anyone tried to make this themselves or...
BA- Thanks for the info I have seen this site before. But what I really need to know is what kind of results will the RF mod produce? Will the 2d be comparable to Radeon or Matrox G400? Is it worth the risk?
Also I have heard some GeForce 2 Card manufacturers like Visiontek or Elsa have a...
hmmm...tough choice. my vote would be for the Sony (i have never seen the samsung but from everything i've read and in talking to people who have own them they also say it's a great monitor), i have this monitor and it is tough to beat; vibrant bright colors and very sharp picture (trinitron...
hurry! just did this deal but had to use different address; "out of stock" in san diego area...
the "anandeffect" in motion!
d e a l i s f a d i n g....
Definitely. I also use to own the acs54's and these blow them away. Crisp highs deep bass plenty of volume. Sounds great w/ Mp3's or games. I've owned several sets of speakers over the last few years and these are unparalled for this price range.
<< But if you don't have the guts, do what I did and reduce your refresh rate to 75hz and it will be a LOT better. >>
thanks for the link but it's not really a question of whether i "have the guts" or not; it's more of an issue of soldering experience...
here is a quote from the...
Upgraded from Matrox G400 32mb and while the 3d performace went up significantly the 2d sucks. Text is fuzzy not nearly as sharp as w/ the Matrox.
Is this normal for this video card?
BTW using an eVGA 32mb Geforce 2 MX w/ Nvidia Detonator 6.31 drivers, 19" PS790 monitor running...
took me a day to do the low level format and install win98se but i would've done it anyway...winme turned out to be more headache than its worth
all is back to normal w/ win98se
Ok time to add my .02
Spoke w/ an IBM technician last week; he basically confirmed what has been discussed on this thread. From everything that I have read to this point I'm not sure I would trust the micron patch. He did confirm that they are providing a utility to "wipe" the hard...
<< the ps790 is a older monitor, and most people complain of moire and color problems because of the shortneck design. go check out the user comments at cnet.com , the g790 which came out at the same time is considered it's superior. i would avoid the ps790 because of the known problems with...
yeah you buy something w/ a return sticker on it and it's either missing stuff or doesn't work!! No wonder their return lines are always long!
Frye's is most definitely suck!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.