Search results

K
Question Add dvi output

I got a 30" Dell display that need DVI dual link input. My Geforce 2080 doesn't have DVI. Is there some way to add DVI output to my graphics card? Is it possible to add a extra card with DVI output and still use the 2080 as the main card? Or would an adapter like this work...
- kallekill
- Thread
- Dec 16, 2019
- Replies: 6
- Forum: Graphics Cards
K
Question Nvidia Upscaling and sharpening vs LG C8 TV

I was wondering if someone has made a comparison of the upscaling and sharpening quality of Nvidias new filters compared to a new TV, say a LG Oled C8. Is it worth offering performance and use the GPU instead of the TV's build in capabilities?
- kallekill
- Thread
- Nov 5, 2019
- Replies: 0
- Forum: Graphics Cards
K
Question 4k HDR display suggestions

I already have a 65 " LG Oled as a TV, but I'm afraid of using it too much with the computer because of burn in. I found this Acer Predator cg437k P : https://www.anandtech.com/show/14210/acer-predator-cg437k-p-a-43inch-144-hz-gaming-monitor-w-freesync-dcip3 It looks good, but 43" is a little...
- kallekill
- Post #4
- Nov 4, 2019
- Forum: Displays
K
Question 4k HDR display suggestions

Im trying to find a 32" 4k monitor that also supports HDR 1000 and G-Sync but I have a hard time founding one. Seems like most monitors have very bad HDR support. Any suggestions?
- kallekill
- Thread
- Oct 31, 2019
- Replies: 4
- Forum: Displays
K
Windows 8.1 limited connection

I installed an old 100 mbit network card (also realtek). I downloaded over 25 GB of data yesterday without a problem, so it seems to work. I also applied all the latest windows patches via windows update. I little early to tell if the problem is gone, but I have my fingers crossed.
- kallekill
- Post #7
- Feb 17, 2014
- Forum: Networking
K
Windows 8.1 limited connection

I have an older, maybe six years old computer that I have run Windows XP, Vista and Windows 7 on. I recently installed Windows 8.1 on it and it is working fine except for one big problem. I keep loosing internet connection. It works for a while, but then it stops working, saying no Internet...
- kallekill
- Thread
- Feb 3, 2014
- Replies: 6
- Forum: Networking
K
Program that can show accessed urls

Can anyone suggest a program that can show what urls a computer is accessing. I want to know what websites my computer is connected to when I browse a certain page.
- kallekill
- Thread
- Jun 29, 2010
- Replies: 2
- Forum: Networking
K
new HD x264 video encoding benchmark

Results for x264.exe v0.58.747 encoded 1442 frames, 60.92 fps, 3905.42 kb/s encoded 1442 frames, 61.94 fps, 3905.42 kb/s encoded 1442 frames, 62.15 fps, 3905.42 kb/s encoded 1442 frames, 62.11 fps, 3905.42 kb/s encoded 1442 frames, 17.00 fps, 3952.85 kb/s encoded 1442 frames, 17.03 fps...
- kallekill
- Post #116
- May 11, 2008
- Forum: CPUs and Overclocking
K
CPU Fan speed control with latest BIOS on Gigabyte P35-DS3

How much memory do you have on your video card? I got 640 MB.
- kallekill
- Post #22
- Feb 24, 2008
- Forum: Motherboards
K
CPU Fan speed control with latest BIOS on Gigabyte P35-DS3

I understand that that you won't get all 4 GB of RAM, but before I updated the BIOS I could see 3.5 GB of RAM in Windows. Now it is only 3.25
- kallekill
- Post #11
- Feb 19, 2008
- Forum: Motherboards
K
CPU Fan speed control with latest BIOS on Gigabyte P35-DS3

I changed it to voltage and now the fan behaves like before. I don't know how to read the Northbridge temperature though. Before, you had to choose Intel QST to be able to read it but since it is not an option any more I don't know. But my biggest problem is that I seem to have lost 250 MB of...
- kallekill
- Post #9
- Feb 19, 2008
- Forum: Motherboards
K
CPU Fan speed control with latest BIOS on Gigabyte P35-DS3

I got a plain DS3 without any additional letters. I noticed two more things. With the older BIOS I got an option named "High Speed DRAM dll settings". With the latest bios i don't have that option. After I updated the BIOS windows reports 3.25 GB of memory. Before, it said 3.5 GB of memory. I...
- kallekill
- Post #7
- Feb 17, 2008
- Forum: Motherboards
K
CPU Fan speed control with latest BIOS on Gigabyte P35-DS3

I just updated the BIOS (from F6 to F12) on my Gigabyte P35-DS3 rev 1.0 motherboard and the first thing I noticed was that the fan started to run at full speed. I have a Tuniq tower cpu fan that have a speed adjuster and with the previous BIOS I could set it to max and it was still not running...
- kallekill
- Thread
- Feb 16, 2008
- Replies: 30
- Forum: Motherboards
K
Questions about Antec P182

Is there a problem with the bottom pci-slot on this case? I have heard that on some cases you can't use the lowest slot.
- kallekill
- Post #16
- Nov 14, 2007
- Forum: Cases & Cooling
K
Questions about Antec P182

Isn't it possible to attach the heatsink to the CPU before installing the motherboard in the case? With the case I currently have I can remove the motherboard with the heatsink still on.
- kallekill
- Post #10
- Nov 13, 2007
- Forum: Cases & Cooling
K
Questions about Antec P182

I got a Gigabyte P35-DS3 motherboard. I got a Quad 6600 CPU and a GF 8800 GTS that produce a lot of heat and I don't know if the intake fan on the P182 will be enough. I only have one DVD-drive in the case so it would be nice if I could mount a 120mm fan in the front.
- kallekill
- Post #3
- Nov 12, 2007
- Forum: Cases & Cooling
K
Questions about Antec P182

I?m thinking of buying an Antec P182 case and I have a few questions. Will a Tuniq tower CPU cooler fit in this case and can I use an Corsair PowerSupply (PSU) 620W HX ATX in this case? Is it possible to have the fan on the PSU pointing upward? Last question is if it is possible to mount an...
- kallekill
- Thread
- Nov 12, 2007
- Replies: 16
- Forum: Cases & Cooling
K
Should I replace the Tuniq Tower fan?

I tried to adjust the fan speed on my tuniq, but it is a little weird. It seems as if it is only working between 0- 50%. Above 50 % it doesn't affect the speed. Max seems to be at 50%. If I leave the fan monitoring at default in BIOS max speed seems to be 1500 RPM, but if I set it to manual in...
- kallekill
- Post #8
- Oct 5, 2007
- Forum: Cases & Cooling
K
Gigabyte P35 Motherboard Thread

Updating to the latest BIOS fixed my problem This happens every time I disconnect the power from the computer. Every time I start up the computer the first time after reconnecting the power cable I get this. I read that this is normal behavior on P35-motherboards
- kallekill
- Post #241
- Sep 24, 2007
- Forum: Motherboards
K
Gigabyte P35 Motherboard Thread

Another thing is that when I try to run the memory at it default speed of 800 I get errors when trying to unrar files. I am currently running my Q6600 CPU at 334*9 FSB with a memory ratio of 2 and everything is fine. This gives me a memory speed of 668 MHz. I have manually set the timings of the...
- kallekill
- Post #227
- Sep 15, 2007
- Forum: Motherboards
K
Northbridge temperature too hot?

What I meant was that I have read that you should be able to hold your finger on the NB for more than 10 or 15 seconds. But if the chip can handle 105° or 80°, that can't be right. I don't know the threshold of pain, but it seems like it is well before 80°. Of course the heat sink might not be...
- kallekill
- Post #11
- Sep 12, 2007
- Forum: Motherboards
K
Northbridge temperature too hot?

I ran Orthos for about 10 minutes until the CPU temperature seemed to stabilize and then I rebooted and checked the Northbridge temperature. I got 78°. Where did you read that the Northbridge is designed for temperature of up to 105°? I guess this is the max temperature. Is there a temperature...
- kallekill
- Post #9
- Sep 12, 2007
- Forum: Motherboards
K
Gigabyte P35 Motherboard Thread

I got a Gigabyte P35-DS3 and when I go into BIOS and PC health monitor I get pass on everything except "DDR 18v" which gets fail. I have used over voltage to run my ram at 2.2V (It is designed for 2.3V). Is this the reason? Also when the system boots I get the thing were it starts to boot, then...
- kallekill
- Post #225
- Sep 12, 2007
- Forum: Motherboards
K
Temperatures of Q6600 G0 and Northbridge chip

Thanks for the answers. I really appreciate it. With the case side off, the temperature drops by 10 C. I moved the intake fan in the front of the case from the bottom up to the diskette station slots, so that it blows air directly at the CPU heatsink. That also dropped the temperature by 10...
- kallekill
- Post #5
- Sep 8, 2007
- Forum: CPUs and Overclocking
K
Northbridge temperature too hot?

I'm thinking of adding one of these or some other similar product above the video card. Akasa System Air Extractor http://www.dustin.se/dacsaport...aspx?prodid=5010072540 By the way, I just guessed that the temperature that speedfan reports at 64 C is the Northbridge temperature cause...
- kallekill
- Post #3
- Sep 6, 2007
- Forum: Motherboards
K
Northbridge temperature too hot?

I'm a little concerned about my Northbridge temperature on my Gigabyte P35-DS3. It hoovers around 60 C and when I ran a stress test it went up to 64 C. It isn't very hot in my room now either. My Tuniq Tower CPU fan is blowing air out of the case, but I think some of the hot air bounces off the...
- kallekill
- Thread
- Sep 6, 2007
- Replies: 22
- Forum: Motherboards
K
Temperatures of Q6600 G0 and Northbridge chip

I just build a new computer with an Intel Quad Q6600 stepping B0 CPU but it seems to get a little too hot. My CPU fan is a Tuniq Tower and I am currently running the CPU at 3 Ghz at stock Vcore of 1.25, but it gets hot even at the stock 2.4 Ghz. At idle the temperature is around 40 degrees C...
- kallekill
- Thread
- Sep 4, 2007
- Replies: 4
- Forum: CPUs and Overclocking
K
Are there two types of PNY Geforce 8800 GTS 640MB?

I was just about to order a PNY Geforce 8800 GTS 640 MB graphic card when I saw that there are two different versions. What is the difference between these cards except for the price and the design of the sticker on the cooling unit? I didn't find anything about it on PNY's website. It looks...
- kallekill
- Thread
- Aug 4, 2007
- Replies: 0
- Forum: Graphics Cards
K
What is the best way to apply Tuniq Tower thermal paste on quad?

I'm buying a Tuniq Tower 120 cooler to cool my Intel Q6600 CPU. What kind of thermal paste is included with this cooler and what is the best way to apply it? I read the Artic Silver 5 instructions on quad processors and they say that the best way is to apply a thin line in the middle of the CPU...
- kallekill
- Thread
- Jul 31, 2007
- Replies: 2
- Forum: Cases & Cooling
K
Question about RAM Voltages

I've decided to buy 4 GB of Patriot Extreme Performance memory running on a Gigabyte P35-DS3 motherboard. I see it is listed as using 2.2V, but when reading comments on this forum it seems as many are running them at as low as 1.8 V. How can this be? Also I read that some motherboards don't...
- kallekill
- Thread
- Jul 30, 2007
- Replies: 9
- Forum: Memory and Storage
K
Gigabyte P35 Motherboard Thread

What kind of symptoms are you having?
- kallekill
- Post #137
- Jul 29, 2007
- Forum: Motherboards
K
Gigabyte P35 Motherboard Thread

Is anyone running this memory on a Gigabyte GA-P35-DS3 without any problems or is it common with boot problems when overclocking? I might go for Patriot Extreme memory instead, but it is more expensive.
- kallekill
- Post #133
- Jul 29, 2007
- Forum: Motherboards
K
Will Thermalright Ultra or Tuniq Tower fit in my old case?

I'm thinking of buying either the Thermalright Ultra-120 Extreme or the Tuniq Tower 120. My motherboard will be a Gigabyte P35-DS3 and I read that at least the Tuniq will fit on this board. The CPU will be a Intel Q6600. My biggest concern though is if the coolers will fit in my case. I plan...
- kallekill
- Thread
- Jul 29, 2007
- Replies: 0
- Forum: Cases & Cooling
K
Gigabyte P35 Motherboard Thread

How do you tell what type of memory you are getting? I plan to buy two of these to get 4 GB RAM: Corsair XMS2-6400 TWIN2X2048-6400C4 4-4-4-12 Xtreme 2x1024MB (tot. 2GB) DDR2 PC2-6400 800MHz with Heatsink Are those the ProMos 667 Mhz chips that can cause trouble?
- kallekill
- Post #121
- Jul 26, 2007
- Forum: Motherboards
K
Does Gigabyte p35-DS3 support memory hole remapping and 4 GB RAM?

I'm wondering if the Gigabyte GA-P35-DS3 supports memory hole remapping. I read somewhere that someone was running 4 GB memory on this board and did see all of the 4 GB RAM in windows without using any remapping settings in the BIOS. Does the DS3 have auto remapping? I am planning to use this...
- kallekill
- Thread
- Jul 26, 2007
- Replies: 0
- Forum: Motherboards
K
Gigabyte P35 Motherboard Thread

I'm wondering if the Gigabyte GA-P35-DS3 supports memory hole remapping. I read somewhere that someone was running 4 GB memory on this board and did see all of the 4 GB RAM in windows without using any remapping settings in the BIOS. Does the DS3 have auto remapping? I also was wondering if...
- kallekill
- Post #118
- Jul 24, 2007
- Forum: Motherboards
K
Abit P35-E supports memory hole remapping?

Does the Abit P35-E support memory hole remapping and have anyone tested that it works? I'm thinking of buying one of these motherboards if they fix the double post problems and install 4*1GB of memory running Vista 64-bit.
- kallekill
- Thread
- Jul 23, 2007
- Replies: 1
- Forum: Motherboards
K
3GB vs 4GB

I read the Ask Dan: What's with the 3 Gb memory barrier? article and I have one question. At the end he writes: "It won't be long before 64-bit Vista becomes a sensible proposition for people who want a PC with 4 Gb or more RAM. Right now, though, there's very little point to it for normal...
- kallekill
- Post #17
- Jul 21, 2007
- Forum: Memory and Storage
K
Questions about Abit IP35-E double post

I am thinking of buying an Abit IP35-E motherboard but I am concerned about the double post problem. How severe is the double post problem on the Abit IP35-E motherboard? I've heard that it adds about 15 seconds to the boot time. Is this just on cold boot or is it also when restarting the...
- kallekill
- Thread
- Jul 18, 2007
- Replies: 5
- Forum: Motherboards
K
Questions about Corsair TWIN2X4096 800Mhz and memory speed in general

I compared the prices of the Corsair 2*2GB modules and the Corsair 4*1GB modules with the same performance and it wasn't that much of a difference. 2*2Gb costs 323.89 USD and 4*1GB costs 302.35 USD. I live in Sweden so I converted the price from Swedish kronor. I thought 2*2GB was better if I...
- kallekill
- Post #5
- Jul 17, 2007
- Forum: Memory and Storage

RESOURCES

Top Bottom