Search results

Z
Motherboard suddenly won't detect installed RAM

I tried testing the memory sticks in every possible configuration, no dice. Since I don't really have a good way to test my ram (this computer is a MacBook) that option was out as well. So, I ran over to the electronics store and picked up some new 2x4GB PNY Memory. Plugged the new sticks in and...
- zantaff
- Post #3
- Mar 4, 2015
- Forum: Motherboards
Z
Motherboard suddenly won't detect installed RAM

ASUS P8Z77-V Pro I left my computer on sleep when I went out, I came back and it had shut down. When I tried turning it back on, I was greeted with the Cannot detect any RAM installed beep code (One long two short). Since the computer wouldnt even boot, I had limited options. So I...
- zantaff
- Thread
- Mar 4, 2015
- Replies: 6
- Forum: Motherboards
Z
Fan Xpert 2 - Interesting Possibilities

I recentally got a P8Z77-Pro and was excited to start using Fan Xpert because I had a really loud 120mm fan that I pulled from another computer. The thing is, this fan was only 2-pins. Upon experimenting with Xpert a bit, I noticed some strange things. First of all, Xpert would recognize...
- zantaff
- Thread
- Jan 25, 2013
- Replies: 1
- Forum: Cases & Cooling
Z
Some fan questions

That's great. I'm going to try that.
- zantaff
- Post #3
- Jan 23, 2013
- Forum: Cases & Cooling
Z
Some fan questions

First question: I have a Sensflow fan, I'd like to install in my case. The problem is that the plug is a male when it needs to be a female. Should I buy something like THIS or something like THIS and strip the wires? Second question: I have an 80mm fan I want to put into my front 120mm...
- zantaff
- Thread
- Jan 23, 2013
- Replies: 3
- Forum: Cases & Cooling
Z
Do these cables look correct?

Thanks! I was kind of worried I was stretching the cables too much. The 8pin is lying on top of the CPU fan headers. I /think/ the fan cable will just be able to fit around it.
- zantaff
- Post #3
- Jan 12, 2013
- Forum: Cases & Cooling
Z
Do these cables look correct?

Hey guys, this is my first time building a case from scratch, and I was wondering how my cables looked. Good, bad? Did I do anything stupid? Also, my 8-pin EATX, cable was a bit short, so it's in there really tight. Is this going to become a problem? Thanks.
- zantaff
- Thread
- Jan 12, 2013
- Replies: 4
- Forum: Cases & Cooling
Z
4x4 or 2x8

I know this answer has probably been asked, before, but I'm just comparing 2 kinds. Running on an ASUS P8Z77-V PRO Price vs Speed vs Compatibility vs Real World difference. Kingston HyperX (4x4GB) ~ $60 DDR3 1600MHz 9-9-9-27 -or- Komputerbay (2x8GB) ~ $65 DDR3 1600MHz...
- zantaff
- Thread
- Jan 9, 2013
- Replies: 7
- Forum: Memory and Storage
Z
Sub-$50 Case Conundrum

Ok now it's defintally between these two cases: Both have wire routing, 2 side panels, 3 Pre-installed fans. ZALMAN ZM-Z9 U3 ($48 after rebate) Pros: Front pannel display Side Window Cons: A bit more expensive Mail in rebates are VERY sketchy. Rosewill CHALLENGER-U3 $40...
- zantaff
- Post #5
- Jan 8, 2013
- Forum: Computer Building
Z
Sub-$50 Case Conundrum

Wow, that does look like a great case. Routing, tooless entry, back pannel for mobo. Nice!
- zantaff
- Post #4
- Jan 8, 2013
- Forum: Computer Building
Z
Sub-$50 Case Conundrum

I've been looking at cases, and I've found 4 sub-$50 cases I like. One main feature that I'm looking for is the painted interior. Side window would be a plus, but it's not necessary, since I can make one myself. The challenge is now, which to pick? Which do you think is the best, based on...
- zantaff
- Thread
- Jan 8, 2013
- Replies: 6
- Forum: Computer Building
Z
Help with finishing my build!

So in other words, with OCing the 7850, there's no real world difference between the two.
- zantaff
- Post #25
- Jan 7, 2013
- Forum: Computer Building
Z
Help with finishing my build!

Is the HD 7870 higher price tag not really worth the speed boost, then?
- zantaff
- Post #23
- Jan 7, 2013
- Forum: Computer Building
Z
Help with finishing my build!

Not necessarily. However, I do have an old xfx radeon 4550 that I can use to get by until my next paycheck. ~ Also, the graphical programs I use are: Adobe Suite, AutoCAD, Revit & 3DS Max. I could, but since I ordered things online, I don't think the shipping costs would make it worth wile...
- zantaff
- Post #21
- Jan 7, 2013
- Forum: Computer Building
Z
Help with finishing my build!

Changed first post, because I realized my goals were unrealistic.
- zantaff
- Post #17
- Jan 6, 2013
- Forum: Computer Building
Z
Help with finishing my build!

Question about buying SSDs - is it ok to buy used, or should I make sure to stick with new? (Also I guess that applies to all parts)
- zantaff
- Post #15
- Jan 6, 2013
- Forum: Computer Building
Z
Help with finishing my build!

I really liked the P8Z77. I was also looking at the Asrock Z77 at the same time, but couldn't pass up the P8 for $145. Also, with the PSU, I really wanted a modular system, so I splurged a bit there too. I'm definitely gonna go up to $700. - My fault for spending the extra money...
- zantaff
- Post #8
- Jan 6, 2013
- Forum: Computer Building
Z
Help with finishing my build!

Thanks! That was really thorough. I'd like to get am SSD to boot because I always seem to f-up my boot HDD... but like you said, it's one of the non-essentials in the build right now.
- zantaff
- Post #5
- Jan 6, 2013
- Forum: Computer Building
Z
Help with finishing my build!

Sorry, i derped the first time I typed it. Fixed it now. I suppose my real question is: what could do without (or less of) until I get a few extra $$$ in my pocket? What parts should I buy first while saving my cash for the nicer equipment?
- zantaff
- Post #3
- Jan 6, 2013
- Forum: Computer Building
Z
Help with finishing my build!

Hello! I'm about done with all the big decisions on my new build and am looking for a GPU and some other parts. I kinda splurged online when buying my first parts. The original intent was to do a sub-$600 machine, and I've already spent $400... So now I'm kinda strapped for cash. What I...
- zantaff
- Thread
- Jan 6, 2013
- Replies: 26
- Forum: Computer Building
Z
1 VS 2 rails?

Here's what I'm planning. I've already purchased my i5-3570K & ASUS P8Z77-V PRO I am probably going to OC the i5 from 34000 to 44000. (Air cooled) Use 4 sticks of RAM SSD (boot) 2 ~ 7200rpm HDDs 2 ~ 120mm fans 2 ~ 80mm fans Uncertain what GPU I'm going to get, but have been looking at <$200...
- zantaff
- Post #2
- Jan 6, 2013
- Forum: Power Supplies
Z
1 VS 2 rails?

Looking at 2 PSUs the Rosewill HIVE has 1 - 12V rail, but supplies 650W The OCZ ModXStream Pro has 2- 12V rails, but supplies 500W Which would be better?
- zantaff
- Thread
- Jan 6, 2013
- Replies: 4
- Forum: Power Supplies
Z
Any experiance with KenTek PSUs?

but THIS GUY has good things to say about it.
- zantaff
- Post #15
- Jan 6, 2013
- Forum: Power Supplies
Z
Any experiance with KenTek PSUs?

Thanks everyone for your input. The battle has come down to these three: XFX Core Edition PRO550W - $76 total http://www.newegg.com/Product/Product.aspx?Item=N82E16817207013 -OR- Rosewill HIVE 650w - $66 total http://www.newegg.com/Product/Product.aspx?Item=N82E16817182132 -OR- OCZ...
- zantaff
- Post #13
- Jan 5, 2013
- Forum: Power Supplies
Z
Any experiance with KenTek PSUs?

Good deal or bad deal? THIS I'm kinda wary because of all the missing cables. Will getting them drive the price way up, or is it no worry?
- zantaff
- Post #11
- Jan 5, 2013
- Forum: Power Supplies
Z
Any experiance with KenTek PSUs?

I've already purchased my i5-3570K & ASUS P8Z77-V PRO :) I am probably going to OC the i5 from 34000 to 44000. (Air cooled) Use 4 sticks of RAM SSD (boot) 2 ~ 7200rpm HDDs 2 ~ 120mm fans 2 ~ 80mm fans Uncertain what GPU I'm going to get, but have been looking at <$200 cards: Radeon HD 7850 2 GB...
- zantaff
- Post #7
- Jan 5, 2013
- Forum: Power Supplies
Z
Any experiance with KenTek PSUs?

650, because of what i put into THIS calculator. And I was hoping someone could at least tell me if its gonna blow up or not.
- zantaff
- Post #3
- Jan 5, 2013
- Forum: Power Supplies
Z
Any experiance with KenTek PSUs?

*SOLVED* Thanks to EVERYONE that posted. Even if you don't agree with my decision, everyone's input really was beneficial! Summary: Didn't even think twice about the KenTeck, Went with Rosewill HIVE 650w. Certain Rosewill series (the Stallion, Green) are very low quality and early on...
- zantaff
- Thread
- Jan 5, 2013
- Replies: 18
- Forum: Power Supplies

RESOURCES

Top Bottom