Search results

Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

To be fair, there are a lot of important points, so it depends on what you're interested in achieving (top OC, or dependable 24/7 OC)? Edit: I'm also not trying to be rude, there's just too much, so it would be more productive for you to ask pointed questions. Are you going to delid? What are...
- BrksEverything
- Post #845
- Mar 3, 2013
- Forum: CPUs and Overclocking
i5-3570k overclock temps

I think 'idontcare' demonstrated that it's not that Intel used a sub-par thermal paste, per se, but rather that they used a thermal paste at all rather than solder, combined with the increased gap between the silicon die and IHS that led to higher temps. That's why delidding and using liquid...
- BrksEverything
- Post #56
- Mar 3, 2013
- Forum: CPUs and Overclocking
Delidded my i7-3770K, loaded temperatures drop by 20°C at 4.7GHz

I'm not IDC, so my input may not be as valuable here, but I recently delidded, and with respect to the IHS: with CLU applied to the die and underside of the lid, I first placed the chip back into the socket, then carefully placed the IHS back on top as near to center as possible. It did slide...
- BrksEverything
- Post #838
- Mar 3, 2013
- Forum: CPUs and Overclocking
i5-3570k overclock temps

I think you're right - fixed.;)
- BrksEverything
- Post #54
- Mar 3, 2013
- Forum: CPUs and Overclocking
i5-3570k overclock temps

My 3570k was 4.6 stable at ~1.248 (offset of ~.055), and temps maxed at 82-83 under IBT load. (arctic freezer i30 air cooler, MX-4 paste). I wanted to go up to 4.8 but knew I would quickly hit a thermal ceiling. So, I delidded, used CLU under the IHS, and NT-H1 between the IHS and heatsink...
- BrksEverything
- Post #52
- Mar 3, 2013
- Forum: CPUs and Overclocking
3570K Overclock, have no clues.

Well, depending on the various features available in your BIOS, and the performance of your motherboard, there are quite a few variables available to modify that can determine what voltage is necessary for stability at any given frequency. Just as discussed in this thread, disabling C3/C6...
- BrksEverything
- Post #37
- Feb 23, 2013
- Forum: CPUs and Overclocking
3570K Overclock, have no clues.

I could be wrong on this, but at least MY version of coretemp doesn't report the voltage you're currently using. The voltage Coretemp gives you is the VID, which is the voltage the chip is telling the motherboard to supply at a given frequency, but not necessarily the one that's being given...
- BrksEverything
- Post #31
- Feb 22, 2013
- Forum: CPUs and Overclocking
3570K Overclock, have no clues.

Well, I'm probably the last person you want to take advice from, but I'll throw my 2 cents in: It's my understanding that auto voltage is useless once you approach the 4.5+ mark, because it's beyond Intel's spec, and they didn't want/need to put accurate voltage references on there for a...
- BrksEverything
- Post #27
- Feb 22, 2013
- Forum: CPUs and Overclocking
3570K Overclock, have no clues.

Well, I'm a big believer in 'rules of thumb'. I don't have the time to devote to fully understanding everything that goes on under the hood of my rig, nor do I expect the members of this forum to educate me on all the finer points of the electrical engineering that may be in effect on my...
- BrksEverything
- Post #25
- Feb 21, 2013
- Forum: CPUs and Overclocking
3570K Overclock, have no clues.

Thank you for the perspective, that's certainly something I lack in this department. I realize OC'ing is by its very nature, strictly speaking, making something do what it was not intended to. But even within this 'field' of enthusiasm, there are generally accepted norms of what is considered...
- BrksEverything
- Post #23
- Feb 21, 2013
- Forum: CPUs and Overclocking
3570K Overclock, have no clues.

Thank you very much for the info, this has been an enormous help! One last question, It's my understanding from an old article linked to above (circa 2007), that vdroop is a good thing, and while minimizing it makes it easier to overclock, allowing it to serve it's purpose protects the CPU...
- BrksEverything
- Post #21
- Feb 21, 2013
- Forum: CPUs and Overclocking
3570K Overclock, have no clues.

I ask because right now I'm zero-ing in on offset stability for 4.6Ghz, 1.006 v idle, 1.248 v load, with C3/C6 off, CE1 AUTO, LLC at 'ultra high' (75%), and wondering if once I've found stability then I'm good to go, or if I really need to try to revert those settings back to default for CPU...
- BrksEverything
- Post #19
- Feb 21, 2013
- Forum: CPUs and Overclocking
3570K Overclock, have no clues.

Thanks for the insight, that chart is amazing:eek: Is there any drawback to leaving LLC at high levels (75-100), or should I try to get it back down once I've found a stable offset? Similarly for C3/C6?
- BrksEverything
- Post #18
- Feb 21, 2013
- Forum: CPUs and Overclocking
3570K Overclock, have no clues.

Vectronic, thank you very much for the info - if you don't mind my asking, which type of OC do you use, and why? My biggest frustration right now is figuring out how to convert my results in manual voltage mode to offset, since there seem to be more variables in play.
- BrksEverything
- Post #15
- Feb 20, 2013
- Forum: CPUs and Overclocking
3570K Overclock, have no clues.

Yes, my original overclock was done by manually finding and setting a voltage (in theory the lowest possible stable voltage), and while I was pretty satisfied with the results, I am now trying to figure out a better long-term solution through offset that I hope will allow me not to have to run...
- BrksEverything
- Post #10
- Feb 20, 2013
- Forum: CPUs and Overclocking
3570K Overclock, have no clues.

@Face2Face, thank you for the insight, the C3/C6 disabling was done on a lark, but I quickly re-enabled them, as they were in use for my 4.6 stable OC, and I believe they are important for energy efficiency. Basically, if I don't understand what it does, I'm realizing I shouldn't mess with it...
- BrksEverything
- Post #7
- Feb 20, 2013
- Forum: CPUs and Overclocking
3570K Overclock, have no clues.

Alright, last post for a while, just had to further complicate things: Following a simple offset tutorial from another website, I reset optimized settings in BIOS, then went for a 4.4 overlcock using +.050 offset voltage. Now I'm more confused than ever: In CPU-Z, under no load, I'm still...
- BrksEverything
- Post #3
- Feb 20, 2013
- Forum: CPUs and Overclocking
3570K Overclock, have no clues.

Okay, so I just tried the above described offset process again, this time I disabled C3 and C6 first, and it still resulted in windows failing to load, followed by a BSOD. Upon rebooting back into BIOS, the CPU core voltage read-out to the left of the off-set/manual setting showed 1.060, which...
- BrksEverything
- Post #2
- Feb 20, 2013
- Forum: CPUs and Overclocking
3570K Overclock, have no clues.

Greetings AnandTech, y'all have been a huge source of info for this lurker as I planned and put together my new build. However, I'm in the process of OC'ing my 3570K, and am running into some issues that I wasn't able to trouble-shoot by reading others' similar questions. My specific issues and...
- BrksEverything
- Thread
- Feb 20, 2013
- Replies: 37
- Forum: CPUs and Overclocking

RESOURCES

Top Bottom