lol maybe!
Thankfully the pc runs cold enough with that fan disabled so I don’t have that noise driving me nuts and hopefully the rma process won’t take too long
So far on the downgraded firmware the fan controller seems to be fine
Newest issue is I have a bad fan. Tl led fan number 2 has started making an awful noise
https://streamable.com/gd5kez
Just outside return window too…so now need to do RMA :)
Anyone else feel like there’s a ghost in this...
Try one RAM stick, and plug direct HDMI into the motherboard, do not use the GPU for now, reset CMOS. i have not had luck using Qflash ive been updating my BIOS for my aorus pro using the procedure that involves booting EFI USB and running the flash command manually with good success.
Also can...
i could buy one...but both of them? and if so why would the SL controller not be affected at all. its been plugged in the same USB header as the TL controllers have been. i just switch them back and forth, and the SL controller works on either header without fail.
based on reddit, there seem to be a number of people ever since the recent firmware/software updates having wonky issues. for the fuck of it i just swapped the USB headers again and now it works. who the hell knows. it sure doesnt.
with the headers swapped (again) now the TL controller...
Yes- 6 pin PCIe connector for power and USB headers for control
The fans have power and spin. the LED fans have no lighting, the LCD fans have the screen lit with the Lian Li logo, they spin but dont have any RGB and the controller doesnt show up in the device manager.
I could buy one bad...
Well im back online mostly. all updated done, windows installed, games redownloading now, all support software and drivers done.....L connect 3 version 2.0.17 is installed because 2.0.18 had issues. Well, im still having issues with my TL fan controller being detected. It was working and then...
I have a win11PRO installer and key. full retail. it required me to go online to install it. its BS because i do NOT want to use my MS account for login.
also FWIW that stupid memory error is back with a fresh install and just windows updates run. it appeared after windows updates. again...
well itll have to wait till i reinstall windows. turns out the fan controller stopped working again. lian li suggested updating chipsets and BIOS if there was one. well there were chipset and bios updates so i did them...it went to boot into windows and well...it asked for my bitlocker recovery...
Yeah, I don’t think there’s a way to downgrade the firmware but you can downgrade to 2.0.17 software which the company company is offering right now because they realize there is at least some sort of issue… I did not end up doing that since the fans now seem to be working after running the L3...
will have to do that when i have a touch more time
as an aside - the new TL controller i installed is no longer recognized by l connect or windows.
a brief search on reddit though suggests its related to the newest l connect software and firmware updates that were pushed through (which i...
Ok well - after disabling that service. things seem to be mostly stable. not seeing that error on reboot anymore
games play great.
computer loads reliably. occasionally when doing a reboot via software, it gets stuck at DRAM light but if i manually power cycle that it loads.
occasionally...
Thanks i will try.
i also found this thread on microsoft forums
https://answers.microsoft.com/en-us/windows/forum/all/the-instruction-at-0x000-referenced-memory-at/bb12f7cc-804c-4176-8864-724d642feea6?page=3
LOTS of folks with this exact issue - even persisting after a reboot. some think its...
Well - ill say this. i turned off the service and then shut down. and no error. ill keep testing, and if i notice the error again ill keep disabling it before reboot and see if that prevents the error.
if that is in fact the error, is there any way to long term fix or troubleshoot this? or is...
Gotcha - well FWIW i did 4 passes of memtest86 (passmark) overnight and it passed without any errors or issues. EXPO timing was on, both sticks were in.
as of now, thje only thing that seems to be causing problems is the random explorer.exe memory error on shutdown or logoff. is there any other...
Ive never used memtest64, i can run that next if its worth it
ive only ever used memtest86+ which has a new version out there it seems (memtest.org)
theres also passmarks memtest86 (memtest.com)
suffice to say the history of the fork from the original memtest project is confusing, is there any...
I am using the most recent BIOS, and everything is now back to default except EXPO is on. So far, the computer seems to be functioning normal.. also yes i am A2/B2 for the RAM. my memory kit is F5-6000J3036G32GX2-TZ5NRW
as far as the QVL, i didnt find the exact memory on the QVL but did find a...
Okay so heres a question - there are no white RGB RAM kits that are listed on the QVL to get me to 64GB, and none that have native EXPO
What are my options?
Is there a way to manually find the right timings or settings to use this RAM? is it a problem to not use the approved RAM?
Hmmmmmmmmm
the DIMMs are in the preferred slots.
I could SWEAR i checked and rechecked the supported RAM lists. I will have to investigate where I found this RAM kit as supported but...that perhaps could be the (an) issue.
jesus christ. so i reset CMOS again because why not.
i literally cannot make any sense of what is going on.
so i went bcak to the old displayport cable. got it to work after booting into windows via HDMI from the GPU. then rebooted. it worked on DP1.1. then i switched to 1.4 and rebooted with...
Okay more updates
windows memory test completed..i enver saw any errors and last checked it when it was 92% done...there is no log file for thisl i dont know what to make of that
was going to do memtest86 next
i did the system file checker and didnt work.
i replaced the fan controller and...
I’m not sure I’m committed enough to do another full reinstall- after already doing that and just having gotten things running again
I think it’s related to either the razer software or the lian li controller as those were the most recent changes to drivers and software that preceded the error...
Some updates - new issues I have been facing
1- razer keyboard double typing after rebooting. randomly will happen. was using synapse beta app thats what it suggested i install. just did a complete remove of all razer drivers device and software and then updated firmware for keyboard and mouse...
a few updates - so in fact my windows installation was somewhat corrupted. i did a full reinstall. this didnt fix the weird BIOS issues (though now this issue is intermittent...who the hell knows why the DP doesnt work i cant explain it at all)
a few questions - are there still 'hardware tests'...
okay theyre cheap enough. ill order a 2.1 cable itll be here tuesday and can see what happens then.
As an aside - ill take some better pictures after i figure out all the lighting and positioning and share some of the 'in progress' pics later but, she turned out okay despite all the headaches!
at this point, if all i have to do to get to the BIOS and recovery things is swap monitor modes, i guess thats a lot better than swapping inputs and cables etc. ill submit this all to gigabyte and NVIDIA i guess, but im not confident theres a solution. if i can find another DP cable to try, ill...
Well to make this even more confusing
when i switch display port to v1.1 it works fine. so its an issue with these cards and DP 1.4 for booting the bios. probably needs a firmware fix would be my guess then.
i disable the IGPU and it didnt work on 1.4 but did work with 1.1
i dont have any...
no option in nvidia control panel.
the cable doesnt specifically say the version but it calls itself an '8k' displayport and lists the specs for 1.4 i think. not entirely sure but it seems to be.
what happens if i disable it and cant boot back to bios?
And final test - i reflashed the BIOS and cleared CMOS. flashing bios didnt fix it. clearing CMOS makes it work exactly one time. then the next reboot and it does not show the splash screen or let you enter BIOS with displayport.
some people online say its a display port issue possibly with the...
is it possible that somehow when it first tried to install windows i screwed up the UEFI settings or something and thats why it doesnt work right? is it worth reinstalling windows and starting that all over, or would that not really solve this? not having access to the BIOS when using...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.