I agree that Acrylic might not be the best for a starter, but it seems to be the longest lasting solution along with copper even though it is hard to change out parts(I haven't done this yet)
The problem I have with ANY flexible tubing is plasticizer leeching. The only solutions I have come...
Before you decide on using flexible tubing, look into rigid Acrylic Tubing. It takes a LOT more time to setup but I found that most flexible tubing 'fogged' up after only a month or two of using distilled water and Copper Sulfate only.
The acrylic tubes have to be heated and bent around...
I am trying to use the XMP settings on my ASUS X99 Deluxe with a 5930K and H100i cooler...
When using the stock settings the frequency will throttle from about 2.5ghz to 3.7ghz(idle temps about 20c), but when using the XMP setting of 2800mhz for the DDR4(I have Corsair 2800 MHZ CL16-Model #...
I had a EVGA GTX780SC paired with a 650ti and only saw about a 5fps increase in BL2 at the most...I returned the 650ti and decided that spending that $150 towards a second 780 was a much better deal than $150 for 5 fps...
I don't know how a 780ti will respond with a 750ti, but I would guess...
I had a 780 (EVGA SC ACX vcore max 1.150) and I recently added a second 780 (EVGA FTW 1.200 max vcore) to my system.
My dilemma is that I would like to be able to get my original 780 up to 1.200vcore so that it can run closer to my new 780FTW...
I am looking into modding the bios on the...
I tried the dedicated Phhysx route and found that with my EVGA 780 at about 1180MHZ would actually score lower in fluidmark when I had a gtx650ti installed along side it. I was able to pick up a few(4-8) fps in Borderlands 2 and Batman:AC...
It seems as though the 780 needs something along the...
Hello All!
With the 780 price cut looming...
I have been running this idea through my head for awhile...I Currently have a H100i on my i7 920 and it runs quite cool. I am considering getting a a second 780 SC ACX and dont know if I should switch my 920 back to air cooling with a NH-D14...
NOPE NOPE NOPE NOPE!!!!! Silverfish are cute compared to house centipedes...I had a house centepede infestation to the point where they were crawling on me at night!!!! NOPE NOPE NOPE!!!!
Do not let house centipedes into your house!!!!
I live in So Cal where they are pretty new and the first...
I tried plugging the CPU only header into the 8pin but the cable will not connect to the M/B, thus I have to use the cable that has a 2x5 on the PSU side and the 8 pin EPS on the M/B side.
Maybe I need to look in my Seasonic bag for a different cable.
I was just wondering if all the of LGA...
The PSU side for the 8 pin power EPS connects to the PSU in place of one of the PCIe sockets, leaving me only one open PCIe power connection.
Basically the cable that goes from my 8 pin EPS is more like 10 or 12 pins on the PSU side of the cable and needs to plug into one of the 2 available...
Recently I have thought about adding another GTX 780 to my system.
I thought a 850w from Seasonic (X series, gold) would have the required connections...but I think my LGA 1366 x58 setup prevents this.
The PSU has 2 connectors on the back for PCI-e. One is needed to connect to my mother...
I have been reading a few threads regarding a dedicated Physx card and had to try for myself to see how one would work with my GTX780.
I only had time last night to run Fluidmark which I found through Google as a Physx benchmark. The odd thing is that my GTX780 seems to run the benchmark much...
I was just down there last weekend for a 1 1/2 day trip for Yellowtail. We saw all of 5 boats while we were out there and none of them were pirates or Mexican Navy...
So it sounds like the individual companies (MSI, ASUS, EVGA, Galaxy) actaully place the components on the PCB instead of sourcing them from bigger PCB/electronics manufacturers...
I tried almighty google as well as the search here, but couldn't find the answer...
Who actually makes, let's say, an EVGA 780 SC ACX?
Does EVGA actually have a manufaturing line where they solder the various components onto the PCB?
Or do they get an aleady assembled chip & PCB from...
I did a little searching and couldn't find the answer I was looking for...
I had my case apart tonight and noticed that my GTX 460v2 was warping due to the weight of the card.
I have not had any problems with the card's performance, but this does worry me that it is constantly in a bent...
I was listening to music tonight and was wondering if it was better to increase the volume through my Marantz SR3001 or Winamp...
I couldn't notice much of a difference, but I was hoping that my expensive receiver from 2008 would have a better DAC than a cheap RealTek chip on my X58 MB from...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.