So far, my ACX sli setup runs as low as 2C higher on idle for the top card to as high as 7-10C higher at load (ie 33c bottom card and 35c top card at idle vs 72c bottom card and 79c top card at load - benchmarking etc.)
Those are the extremes. Most of the time my top card stays in the high 50s...
@ch33zw1z
I really want to thank you for taking the time to help guide me through all of this. When we finalize our move and have it all setup I'll update how it all went. In advance, thanks again for all of your help!
Also to everyone else on here thanks for your input! I always learn...
I was re-reading your post and I am learning a lot and I appreciate it. In my second read I picked up again that I "shouldn't" change the default gateway and many others have voiced this. What's the reason(s) one would and why is it a bad idea?
I lose you at "Change it to 192.168.1.2-192.168.1.100". I don't understand the DHCP ranges. I didn't mess with that before. If I change the range like you said then won't this exclude the 192.168.1.1 (not in range). Is that on purpose or a typo? If on purpose what's the reason? I'm confused now.
I guess I'm just overthinking and anticipating issues that may not be that big of a deal once I get it going. I had replied to Railgun but Anandtech was doing maintenance so my reply did not show. In that reply I added the link to where I was following directions and in that instruction you...
I'm following these instructions for adding a second router:
http://www.labnol.org/software/add-router-to-wireless-network/19716/
For my current needs the rt-ac52u has been sufficient and I've listed in detail my experience and process thus far to achieve my current home setup for my...
Well, since I'm now considering buying the same exact router I anticipate the problem of not being able to access one or the other if I don't change the IP address with both ending up 192.168.1.1. Currently let's call RT-AC66U Old 192.168.1.1. If I buy RT-AC66U New and don't assign a new ip...
Hello Anandtech community!
I am somewhat of a network noob. I've successfully added a network bridge albeit with some serious headache. I work full time with kids and have a degree in Neuroscience from UCLA. So I'm a power user compared to the average joe but compared to some of you on here I...
Hello Anandtech community!
I'd appreciate some help figuring out a few things. I don't usually check my user folder but I found this:
Is this safe or normal? Why is it there? Is it okay to delete them and if so what will I lose, gain, benefit from doing so?
I haven't done anything out of...
I tried pm you instead of replying via the forum bc it's no longer really related to the original topic but as I do not have 25 posts yet I cannot.
Heres my final word on all of this. I was having a bad day and I was escaping to anandtech and really have had a pleasant experience prior to...
@VirtualLarry
Yeah, I was pissed. He didn't have to state things like that. He could have said the same thing you did. I can respect being critcized. Mikemikec's tone was negative, sarcastic and completely unnecessary. I reacted accordingly but yes I could have reacted with a much cooler head...
I simply update my enthusiasm for regaining lost performance and my frustration for the inconvenience it's caused me. If I were a computer specialist and I did work for microsoft, I'd definitely take ownership for a loss in performance with the update. I'd look into what caused it and I'm sure...
For reasons too long to list I reverted to windows 8 and my system reboots much faster! 10x's approximately. Just like it was before! So the slow down in boot up time is definitely related to the 8.1 update. My real time restart is down to about 30seconds now from about 2-4min. The wheel on...
I know it lists what you can do to a file but other than guessing that it may mean file functions or something like that which makes sense, does anyone here know from actually being taught about it? I made a youtube video on how to remove write protection using diskpart and someone asked me...
It sounds like in "theory" there is no actual need for page file assuming code is written correctly. But to paraphrase mfenn it seems that poorly written programs may say "rush" to the page file instead of performing status quo thus leading to an otherwise avoidable crash therefore just by...
Wow, very well said. This provides a lot of conceptual clarity and I greatly appreciate it! It sounds like I'm well setup but I'm very intrigued why even have it as a feature as you can see by my recent response above.
Thanks for the clarification. So, I currently have my C Drive (120GB SSD w OS)set at min = 1024 and max = 1024 pretty arbitrarily.
Is there any downside to setting my data drive D (4TB HDD) to having a page file about the size of my ram? I'm assuming the hierarchy in terms of windows...
So, for anyone in the future who runs into this issue hopefully they find this forum and save themselves the stress. I just finished chatting with Asus directly and they say it's "100% safe for your computer" when I asked if this PEbiosinterface32.dll is really from Asus:
Hope this helps...
Thank you both for responding. I'm hoping postmortemIA is right. I'm afraid lxskllr to try changing an asus product that may just be a false positive and interrupt my system in a larger way than anticipated. Still not sure what to do but at least I have people here trying. Tom's is blank...
I already ran it through virus total and it shows me:
I've googled this and can't find much useful info. It's cleared Norton and Malwarebytes too. Here's my concern. It was created about 25minutes ago. Just an hour before that I had mobogenie malware to deal with after trying to update...
So what do you have it set at? min = ? max = ?. Is it min = 2GB and max = 2GB I presume? Why not a range? Why does nobody do a range if it's there?
@virge. I'm not too worried. Just thinking about it and there are those out there who are very worried about it but don't participate...
Hello,
I'm not here to debate whether to have page file for ssd on or off. Let's assume those posting to this thread want it on. The matter then lies in how do you have it on?
Currently, for lack of better reasoning other than majority rules I have page file on my 120GB SanDisk SSD with min...
Wow, it looks like we revived this otherwise necropost!
@Lat
You're the only person I've seen list their min max values differently with a range! So, you decided on 200MB min to 2000MB. When I get to that field it makes sense to me to do it that way. Anyone else care to explain why it would...
I know this is over a year old but was easy to find off of google so others may still benefit. @g73s when you say 1024min/max you set both the min and the max the same at 1024? Would it be better to make the min 16 or 0 and the max 1024? I just am not clear on the concept as what if the page...
@MaXimus666
I appreciate the detailed response. I will look into updating the nvidia driver to an older one; however, your link is for the mobile version when I click desktop and the mobile version has an error. I'll find it but I appreciate the info nonetheless.
@ketchup79
Yeah, I've heard...
@denis280
Thanks for the welcome! I did have all drivers up to date on 8 before updating to 8.1. I actually did this a week after release. I've just been living with the slower boot up since then and haven't had time to research what may be causing it. This will make for much more tedious...
Hell Anandtech Community,
I'm copying and pasting a topic I brought up on Tom's but only received a couple of responses. I'm hoping some of you here could help share some of your experience with regard to this issue:
"Has anyone else been experiencing this? It says now 9.3 seconds instead...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.