My guess is that you maybe overclocked the CPU?
Then i would eather increase the QPI/Vtt one step or the v-core 1 step
Also your ram voltage is set to?
Also run one memory stick at the time to check if that is the cause of your issue
have you reset the bios and set it to optimized defult if...
Yes i know! Hopefully it will deliver enogh though. Otherwise i sell it to someone who need 7 PCI-e slots :) . I am pretty sure i will get my money back anyway!
i am going to test my new purchase Asus p6t7 supercomputer. I was lucky to find a motherboard that was never used before and to a price i couldnt resist! $60 :)
Anyone who tested this motherboard?
Hello
So i got a new 580 today as i wanted to test SLI in BF4. My budget is limited so i figured that was the way to go.
Now i am facing heat problems instead and starting to regret my purchase!
The motherboard has 2 x16 pci-e and one 8x pci-e.
Is there some way to swich the 16x and 8x pci-e...
OK so I had a random crash today! i started to investigate this in my logbook and i found that i had a Critical kernel power event. This happen pretty much after i updated Adobe flash. Dont know if that's the cause as i have had this Warning kernel power eventID 91 (88) all the time the CPU has...
That sounds high to me! Why do you use Dynamic Vcore?
Anyway if you run 1600MHz sticks in 1850MHz i bet thats your problem maybe?
Also read this awesome guide and start from the beginning instead.
http://www.techreaction.net/2010/09/07/3-step-overclocking-guide-bloomfield-and-gulftown/
I...
Have you been following the guide? Start with X6 SPD and see how far you will reach with the BCLK. Thats the first thing i did.Also keep in mind that if you running the SPD in X8. The uncore multi... need to be atleast x1.5 the SPD (Mhz).I think its your uncore that may be messing with you!
I...
Please look at this post by EndlessWargasm
http://forums.anandtech.com/showpost.php?p=35724849&postcount=828
He was posting a link to a guide that i was following. Read it ! Very good reading and this made me understand how things work together on a X58 system.
Also i was following the step by...
Ok
Well i wasn't talking about the yellow bars. They pop up and down shifting from yellow to red all the time! I mean TM1 and TM2.
Also i have another error on one of my SSD drives! Guess its nothing.
The third thing that happens after i overclocked is that my DVD rom cant read dvd,s any more...
Hello. I found an interresting thing in this screenshot. My TM1 and TM2 is red! I have all CPU power savings on . Is mine broken? Also i disabled cpu core parking and use realtemp to verify the temps.
I managed to hit 3.6GHz yesterday stable in Prime with 200x18 and 1600Mhz mem... speed. Looks...
Thanks but i think i have been trying QPI/VVT at 1.35v but its no change.I can go as low as 1.18v and it crashes at the same place.
Vcore doesnt change anything eather. I have not forced the Vcore to 1.35v . I have been useing Vcore dynamic and set the Vcore to normal and Vcoredyn... to 1. Not...
Ok so i have reached BCLK at x185 with x8 SPD and its stable for 1 hour in Prime95
when i raise the BCLK to x188 it freezes in Prime after 20 minutes at Test 3 800000
I have tried to set the QPI/VTT higher (from 1.18v) to 1.26v but no change :( what am i missing? Also i look in the HWinfo i...
Can it be a timing issue? I have less errors in auto mode (No overclocking)
1333MHZ 1.50V
9.9.9.24 2T
tRFC 74
When clocking tRFC 74 wont work. The boot fails so i changed it to 90
*EDIT* So I have been running prime and after 15 minutes the computer reboots.
Sure the temp of the CPU tops...
Thanks man!
Well i was playing yesterday and the computer rebooted after 20min of playing . The temps was ok as i checked that before it rebooted every 2 minutes. I also logged the temps. Now i ran HCI Design memtest and this makes me a bit scared!
here is just a little bit from the logfile...
Yes well my render times in both 3ds Max and Vue has been greatly reduced with this CPU! Its a big difference to me!
Also I am working with CAD,As far as the applications i use had Multi treading support I notice a big difference between this and my 920
I bought this cheap (~$60) and I can...
:) no but an increase with @200Mhz should give some boost in the better direction not the wrong direction if you know what I mean. Feels like the CPU is limited as the Benchmark shows.
I am happy no doubt about that, Only a bit confused why those 200 doesn't apply
I have something that says...
Well i am a bit confused! I have a problem that my scores is getting worse when i raise the BCLK above 195 in passmark
From 3.5GHz to 3.7GHz i get 2 points less in singel treaded test. I have double checked four times.
Also why isnt the CPU uses the X19 and X20 ? Rock solid x18 when I stress...
Ran this passmark today and i must say i am pretty satisfied with the cpu score.
Stable 3.5GHz 55deg full load.
1.2V vcore
1.26V QPI/VVT
1.14V IOH Core
!Also i managed to squeeze some juice out of my GTX 580 too!
Stable at a maximum 70deg full load!
Core 874MHz
Mem 1035MHz
Shader 1748MHz
Yes i am but i only :rolleyes: have 3200Mhz at 200BCLK . But still amazing as you say!! Question is what have missed? i run it in 16x cpu multi... with no turbo and speedstep activated. May be the cause why i get 3.2GHz? Can i force the CPU to use all 18x ?
Anyway will try to figure out how...
Ok thanks !
Well then i have to figure out what other thing that may cause the stabillity problem after 200BCLK. Thought it was the QPI frequency!
The system runs at maximum 50 Deg.. celsius with Intels CPU loading tool so it runs pretty cool
Anyone who know how i can lower my QPI link speed of my board.Im at 200BCLK and i am a bit shaky when i see the QPI link frequency is over 8Ghz
Also i have try to set it to X36 but as far as i can see it still say x44 in the M.T.I summary page in bios. Not sure if i have change the right...
Ok so i have reached 200bclk. After that my system vill freeze
I have a problem though. My Qpi frequency is above 8GHz and Ido n't know how to lower that value? I have a Gigabyte Ga EX58-UD5 and the lowest multiplier is slow then x36, x44, x48
Should I choose Slow? 8GHz sounds harmful...
Well i found out what was wrong at last! After countless of hours it was just memory settings. As i am pretty new to this manual overclocking i started to change the numbers on trc and trfc and also set the multi to 8x on the memory 16x on uncore as it obviously need to be twice as high then the...
Well i have seen a guy that managed to squeeze this CPU pretty well with the same board that i have
Funny thing is that i can set the FSB from an application called Setfsb. Why? Why cant i do it inside my bios when i can in Windows. At 150 its pretty unstable and i cant find any good settings...
Please can someone with a Gigabyte board post their settings in bios? Take a screenshot of voltage and frequencies in the overclocking sections in bios?
Can someone please tell me what their " CPU clock drive " is set to?
I put my 920 back in and started pushing it. I notice that my clock drive is set to 800mv now
With the 6core Xeon that number was 700mv
Also Pci express clock drive is set 200mv higher for my 920
Summary...
Ahh ok :)
Yes but what am i missing then? Thats the question. I find it annoying when i cant even raise the BCLK 1Mhz . I mean 1Mhz cant do much , Same with all frequency settings in the overclock section. Voltage is ok. I can change all voltage settings and it still boots but frequency no no.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.