I am running a bit warm - 48C per monitor (better fan on order). I have newest BIOS and 4:1. When I try heavy IDE work on RAID 1 (my main HD) and use my USB pockeydrive, I get blue screen error stating that I was unable to write to C: - errors expected. This was worse before I updated the 4:1...
I have the original (?23) drivers installed and now IWILL recommends the newest (32?) drivers. Should I just install the new over the old or is there an uninstall - install procedure I should follow. Thanks in advance.
I want to capture audio from my VCR/DVD/Stereo using on-board sound. This should be the MIDDLE audio connector in the back of the mobo. With the AUX and LINE IN maxed out in the mixer the sould is still very quiet when connect the LINE-IN from my STEREO. It is only a little better with input...
KK266R 1GHz Axia TBird 200FSB unlocked L1, L7
I ran fine 133FSB@auto mult (10x). Then I overclocked to windows error and then nopost
- about 160/10x. Rebooted at 100FSB - 1GHz. Now I can't post at 133MHz/Auto (10x) anymore.
Do I have to clear my CMOS? Do I have to wait for CPU to cool? The...
I just flashed to kkr0307.bin with the telephone help of the vendor. the flash utility reported a checksum error but we proceeded anyway. PC seems to work fine...
my .02
I plugged the on/off switch into the wrong header. I got bios showing on monitor. I am proceeding. Thank you.!!
its my first time:
1. kk266r
2. tbird, with h/s and fan
3. 256 mb ram
4. vid card intstalled
5. powersupply works - tested it
I put parts together, plugged in atx connector...
I'm building my KK266R/Axia Tbird@1.4 rig with a PEP66 HS. I got the sheetmetal 80mm to 60mm fan adapter with a "quiet" fan from the vendor (set to suck.)
I understand that the reducing coupling causes significant loss of air flow. What are the benefits of putting a second 80mm fan...
I have everything for my system except the memory and cpu. I plugged in the atx connector into my new IWILL KK266R without any cards. No response from PSU when I turned it on (No fan).
Do I have a DOA or do I need to add the CPU?
If I need CPU how can I test the PSU without one?
Reived today (<24 hour response time!!)
To:
Subject: Re: Post-glitch KK266R identification
Dear :
Actually, we have no problem at all on KK266R after we double checked. The
multiplier issue only occurs on KK266. We will correct our press release
very soon.
Please remember Iwill always...
News Flash: IWILL is owning up to some defective 1.2 boards and will RMA all bad units. All new stock 3/5 and newer is said to work well.
your humble reporter.
Which fan sounds easier on the ears, the sunon 60x25 5100rpm 24cfm 34dBA, or the YS Tech 4700rpm 27dfm 35dBA. There are volume and pitch consideations here. Is the Sanyo quiet fan much less efficient with an Alpha66. I plan to buy one of these fans, and also a quiet sanyo in case it gets too...
Which fan sounds easier on the ears, the sunon 60x25 5100rpm 24cfm 34dBA, or the YS Tech 4700rpm 27dfm 35dBA. There are volume and pitch consideations here. Is the Sanyo quiet fan much less efficient with an Alpha66. I plan to buy one of these fans, and also a quiet sanyo in case it gets too...
I have the capture board in the box and want to build a rig as soon as Anand publishes his KT133A shootout results. I am concerned about reports about incompatibilities with AMD or VIA products - some do, some don't...
Whaddaythink????
flame away...
Regarding Raid 0, what is the performance difference between 5400 and 7200RPM or is this not germaine since the 5400 drives can't handle the steady I/O (those two second coffee breaks)??
e
Can somebody post relative performance levels for:
Raid-0 7200rpm drives
Raid-0 5400rpm drives
Single 7200 drive
Single 5400 drive
With Mobos coming with Raid on board, is it still worth the extra money for two 7200rpm drives when much larger capacity can be had at 5400?
If not, any...
Update: b/o for about a month. I cancelled internet order and am mailing a new order with a check to get the free shipping.
e
p.s. check out the $60 rebate from circuit city on units w/o voltage regulator - just battery. great for the tv/stereo, etc.
I don't recall where but there was a post a month or so ago about a DIY UPS. The standard marine deep discharge batteries are not sealed and so the spill risk must be considered. I would get one of the plastic enclosures to be on the safe side. You need to match the gauge of wire and use heavy...
I'm getting ready to build my KT133a rig, probably with a hot Duron and 150MHz CAS 2 memory. Looking at the posts for vendors I see Azzo and PCNut (good reseller rating) with no cpus in stock, and overclockers Store (bad reseller rating) with lots.
Please post your advise on where to buy...
I would have bought one from the geeks at 160 if available. Hey what about using a marine deep cycle battery from Sams Club at about 50 bucks - just run the wires... Or a Gel Cell Miata battery.....
The shipping was reasonable though, under forty if I recall, maybe under thirty.
Received in email:
After 13 years in business, Learn and Play has closed its doors. We have truly enjoyed serving valued customers like you, and hope you have enjoyed doing business with us.
But don't worry, you'll still be able to find quality toys and games online at our sister company...
What I like about this unit is that it comes with a voltage regulator. We get frequent brownouts in our affluent suburban area. With the VR you don't have to go to battery to keep the voltage up, the box just adjusts it. Thanks for the advice, I hope I don't get a bum battery.
What do you...
According to Direct Deals customer service (the people with the $10 Norton disc) these are about six months old off a lease deal. They are checked and cleaned. The battery is not new, but one would think that after half a year you have some good life left. Price searching for the new product...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.