Yes set the dram clock to host+pciclock. This gives you 133 mhz for your ram.
As to FSB the maximum is around 110mhz. This is a chipset limitation which is partly the reason you are seeing KT133a boards coming out now. They can run 133mhz FSb.
Try here for further Bios options
The limit to the KT133 chipset is around 110 mhz for FSB , some get a touch more some less.
I get 113 mhz as a FSb for my board Abit k7t-raid.
You can run your ram at 133mhz and beyond but that also depends on the type of ram you have or get. Usually good quality ram will run at a higher than...
I saw a preview video for Halo today at a game store.
All I can say is if the game is half as good as this video we are in for a treat.
Talk about great graphics. Light reflecting different colours off the leg amour
and the different planets in the sky. Exhaust trails on the ships.
Then I find...
Going from Memory here I think when you first boot up it gives you a message to go and enter Soft Menu III.
From there you can set your cpu speed and voltage according to your cpu specifications.
This maybe of some help.
ABIT KT7 & KT7-RAID FAQ
bogdan
I always found the best way to upset someone and not have it come back to you is stuff up their email settings.
Where i work I found the system could crash and die 50 times a day ( not that it does ) but as long as email is flowing people tend to be alright about it.
When mail server dies its...
I have Battlezone 2 running on winme without a hitch.
Using Duron with kt7-raid and asus tnt 3400. ( time for a new video card).
It runs using all latest video drivers.
Have a friend running k63-450 with asus 6800 video card and winme.
He has no issues either.
dont know about janes as i donr...
I see you are using a soundblaster live card.
I am assauming you have installed Liveware 3.
If not go get it first.
Liveware 3
Now go into your control panel. click on AudioHq.
Go into the mixer. you should see a Fad button.
This is the fad button for front and rear.
the bottom one is left...
Click the link above your post it also lists pc100 cas 2/3 and pc133 cas 2/3 benchmarks.
Make that two posts I was not fast enough.
I usually do not do much benchmarking on my own system.
I just change the settings until it does not crash when booting into windows then i use it.
Keep an eye on...
I read somewhere that Windows Me does not like logitech mice.
It is a driver issue Logitech apparently could not care less.
I was using one and getting all sorts of weirds things happening.
I uninstalled the logitech drivers and just used the Win Me ones and it has been fine.
However that...
This was benchmark i saw it maybe of some help.
Cosair PC133 Cas 2 review[/L]
I believe some boards are picky about the ram you use.
You would need to sure it would run in your system.
Not that I have had any problems with generic ram.
Have ran Generic PC100 ram on an a7v with no problems...
There is the 6 pci slots of the abit boards ( non -raid & raid ) againist 5 pci of the Asus board issue as well to consider. Although I personally do not see a need for 6 slots myself.
I have both A7V and KT7-raid boards and like the Abit board better. That is just personal preference maybe...
Thanks for the advice Officeboy.
I knew it was too good to be true.
In that case all i get is 150mhz.@cas2.
But that may be the board holding it back.
I will try the ram on an Asus A7v board and see what happens.
Sorry to shatter your hopes Stro and for the bum steer.
Which comes to the...
Mentallo
Go with Tonec's suggestion.
Thats what i done when i run out of connectors.
I added one to a 230watt power supply and it coped alright with the extra connector.
nowadays a lot of fans,etc come with a pass though connector
for that exact reason.
pity you are not in Australia could have...
Hey Stro,
Its cosair ram model number " cm654s128-133c2 " - 128mb (8mx8).
bought it from the cosair dist in australia
cost like twice as much as the cpu.($430 aus).
I have actually just raised it to 170mhz. ( way to go!)
duron 600mhz@790mhz core voltage 1.55.
cpu temp underload 38...
I have gotten a 128Mb stick of cosair pc133 cas 2 ram to run at 171mhz at cas 2.
It would seem to be the limit of this stick the ram, although I have lowered it a bit
to ensure no errors when running.
I run it now at 167mhz and have done so for the past 5 weeks with no problem whatsoever.
bogdan
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.