Search results

D
Sound upgrade for my computer?

Unless I have missed something, My Sound card Doesn't provide Front audio/mic connection. My Motherboard doesn't support my Digital speakers My Case's Front Audio out cable doesn't reach the Motherboard connection. now My questions are: Is there an extension cable for the Front audio out...
- DeathscytheHELL
- Post #3
- Jul 16, 2007
- Forum: Peripherals & Components
D
Razer Keyboards

I hated this keyboard after buying it. Technically it was sound. I could press keys like mad, and never missed a keystroke. The macro keys were kinda hard to use, but did what they were supposed to it was the fundamental things in the keyboard that I should have taken a closer look at...
- DeathscytheHELL
- Post #20
- Jul 7, 2007
- Forum: Keyboards
D
Sound upgrade for my computer?

here's my setup and my problem: Asus MB with realtek ac97 onboard sound(not being used) Sound Blaster Audigy in PCI (currently connected to speakers) Altec Lansing Digital 4.1 speaker (540z i think) old speakers (1 green connection, 1 black) Nexus LEXA case (has front headphone/mic plugs)...
- DeathscytheHELL
- Thread
- Jul 7, 2007
- Replies: 2
- Forum: Peripherals & Components
D
Video Problem leads to a question

The Rosewill runs a single line specifically for the video card. And is brand new (1 month and 1 week old) And by any calculations should EASILY handle the system, especially not under load The sound is probably related to the PSU and video card but when the 4-pin power is connected to the...
- DeathscytheHELL
- Post #6
- May 3, 2007
- Forum: Computer Building
D
Video Problem leads to a question

No this wasn't like the pc speaker warnings This sound was like when you make a balloon squeak, only louder. It dissipated almost instantly when the power was turned off This sound appeared when the power to the video card was unplugged from the power supply. So the only power the Video...
- DeathscytheHELL
- Post #3
- May 3, 2007
- Forum: Computer Building
D
Video Problem leads to a question

I built a computer for a friend. 600W Rosewill PSU Gigabyte DS3 Motherboard (rev3.3) eVGA 8800gts (320mb) video card 1 SATA DVD burner 1 SATA Seagate HDD and 3 120mm case fans The Monitor stopped receiving a signal from the video output, for one reason or another But we guessed that...
- DeathscytheHELL
- Thread
- May 3, 2007
- Replies: 6
- Forum: Computer Building
D
Problem with my GIGABYTE GA-965G-DS3

Don't jump just yet It's been a long road, and I actually bypassed the problem with a SATA DVD One more format, now that I know the Intel SATAs are faster, or have to worry about AHCI and I think I am done messing with this board. Man this was a learning experience! @Bozo Galora and vailr...
- DeathscytheHELL
- Post #97
- Apr 16, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

Sorry about the No screenies, because I had to read replies right before I head to work, I have been late everyday this week trying to figure this out. And have had less than 5hrs of sleep everyday and unless these screen shots tell you anything, this is the last time I can do more than...
- DeathscytheHELL
- Post #81
- Apr 15, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

I just want to know if the steps listed above were what you did, and if at some point I didn't do what you did, let me know. And since you know a fair bit more than me, you would be able to comment on whether certain step matter or not. Like the difference between a Slipstreamed Jmicron driver...
- DeathscytheHELL
- Post #77
- Apr 14, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

For example my try tonight: SATA HDD on Jmicron 5 (master) IDE ODD on Jmicron 4 (master) Master 0-3 None (turned off) SATA AHCI Mode :: disabled SATA Port0-3 Native :: Disabled Onboard SATA/IDE Device :: Enabled Onboard Ctrl Mode :: AHCI f6 Jmicron (1.17 from station-drivers) 363...
- DeathscytheHELL
- Post #68
- Apr 14, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

As you can see in my last post, I have listed all the relative Bios Settings And always said where the hardware have been placed, and in the case of the IDE DVDrw burner, even listed where the Master/Slave Jumper was set, and that it was set on the master of the IDE cable itself.(not terribly...
- DeathscytheHELL
- Post #67
- Apr 14, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

out of curiosity, what did I do wrong in my previous setup? Because I do have a Burner showing up. As far as Windows only doing CDs, may be right, but I get an error copying the file(s) to the Drive.
- DeathscytheHELL
- Post #63
- Apr 13, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

Alright results: Seagate SATA HDD on Jmicron (5 Master) LG IDE DVDrw on Jmicron (4 Master) Intel All 4 turned off Intel SATA Disabled Native Disabled Onboard SATA/IDE enabled Onboard Ctrl Mode AHCI f6 choose Jmicron AHCI 363 Delete Partition, format Install Windows, Nothin ever...
- DeathscytheHELL
- Post #55
- Apr 12, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

yeah! I did something right! I suppose it was bound to happen sometime. Not at first, for some the catalog file would change dates, on the new Core2Duo, I only have 1 floppy disk drive, and its on there for the installations. I keep popping the USB drive back and forth between the new one...
- DeathscytheHELL
- Post #52
- Apr 12, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

Don't know, it usually pops up as SCSI with the Jmicron Setup.exe and WDC is a IDE HDD inside an External Enclosure, and is connected by USB, I don't have a Thumbdrive but thought this would work. Always do. I can't get the ones from station-drivers to work, copied from the Floppy 32...
- DeathscytheHELL
- Post #44
- Apr 12, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

This LOOKS like yours... but doesn't work like yours Well, it looks like yours, but I am assuming something is wrong. My primary IDE and Secondary IDE still say Microsoft drivers. Does yours say intel? -especially want to know if this should work to just plug in my SATA ODD- And I don't...
- DeathscytheHELL
- Post #40
- Apr 12, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

Following the steps laid out by Vailr and Bozo have in their setup, except having to use IDE on Jmicron skipping f6 for Raid.Real pretty, doesn't work I don't have Nero Installed yet, but windows dvd write doesn't work Disable Intel 0-3 SATA AHCI :: Disabled SATA Port0-3 :: Enabled Onboard...
- DeathscytheHELL
- Post #39
- Apr 12, 2007
- Forum: Motherboards
D
Razer Keyboards

Sweet, I can get matching KB and Mouse... :) So, have they actually released the Battlelight yet? Because the packaging of the retail versions make it sound like the BattleLight comes with the Keyboard, but on some reviews it says "sold seperately"
- DeathscytheHELL
- Post #11
- Apr 10, 2007
- Forum: Keyboards
D
Problem with my GIGABYTE GA-965G-DS3

You could just linky some of the tutorials that I found when Googling for Slipstream Installation. http://www.maximumpc.com/article/How-To--Slipstream-your-XP-installation and http://unattended.msfn.org/unattended.xp/view/web/3/ are ones I found of course tips and tricks could be listed...
- DeathscytheHELL
- Post #35
- Apr 10, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

This also uses a RAID array. And a SATA ODD. Which Bypasses the problem with my setup. So at this time I am just gonna assume it's still impossible to have a non-raid HDD and an IDE ODD on the Jmicron Controller that works
- DeathscytheHELL
- Post #28
- Apr 9, 2007
- Forum: Motherboards
D
Razer Keyboards

Out of curiosity, How did this turn out. I want to buy the Tarantula or the G15, haven't checked on the Saitek By the technical specifications it gets my choice, especially if the Battlelight comes out. But if you spent the money on this one, let us know how it is. I love my Razer...
- DeathscytheHELL
- Post #7
- Apr 9, 2007
- Forum: Keyboards
D
Problem with my GIGABYTE GA-965G-DS3

This is the Correct Nero Screenshot EDIT: Opps I noticed that Listed in Nero I have 5 Secondary's and only 1 Primary, But you have 3 Primary's And I am using Fujifilm DVD-Rs that have never given me problems with any of my other IDE ODDs. (remember I did test with my older BENQ ODD in this...
- DeathscytheHELL
- Post #18
- Apr 9, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

Device Manager Screenshot without JMdrivers installed Even without SCSI/RAID controllers drivers installed This setup still leaves the DVDrw's unable to burn Error in windows drop and write and total failure or more than about 75MB before this error in NERO Nero Error when at 5% complete...
- DeathscytheHELL
- Post #16
- Apr 8, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

I wish you would stop doing that, you post potentially useful information, and then take it away. Cut and paste answers are still answers, and what is time consuming is going back and deleting your messages. Even though I had read the Intel FAQ and the Gigabyte FAQ already (before you...
- DeathscytheHELL
- Post #14
- Apr 8, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

As from my posts in another forum, I have given up on the idea of saving the INTEL Sata slots for future updates. And have been keeping my DVDrw on a seperate controller. I don't think I can easily change out the motherboard. This isn't my computer, just one I peiced together for a friend...
- DeathscytheHELL
- Post #13
- Apr 8, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

Check Not using Jmicron RAID drivers Set to SATAII *no jumper* Ran the correct intel chipset inf Have SP2 xp PRO, no slipstream... we'll be trying that this week Because this setup resulted in nothing different, DVDrw hangs when burning
- DeathscytheHELL
- Post #11
- Apr 8, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

Doh, I was gonna try some of the things posted on that reply that was removed. But first, can someone tell me if the pre-install of the Jmicron drivers actually worked? I know this has nothing to do with this MB or the drivers. Did the drivers actually get installed, and then the Raid...
- DeathscytheHELL
- Post #7
- Apr 3, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

Just to be clear, inside my computer is: 1 Seagate SATA 3.0Mb/s 320Gb HDD 1 LG IDE Multicombo DVDRW Motherboard GIGABYTE GA-965-DS3(not g, not p) rev 3.3 bios 10(i am pretty sure) Thats it. The Settings are: HDD on 1st Purple (IDE 5 Master in Bios) DVD on IDE on IDE Cable and jumper set...
- DeathscytheHELL
- Post #5
- Apr 3, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

I was hoping to not have to reinstall Windows to fix this.... no luck. Installing SATA/Raid Controllers drivers from the Gigabyte disk was 1.14 Installing the setup from Jmicron, was 1.17 HDD in the Purple Gigabyte SATA, and DVDRW on IDE Master Changing Bios to: SATA AHCI Mode :: AHCI...
- DeathscytheHELL
- Post #3
- Mar 25, 2007
- Forum: Motherboards
D
Problem with my GIGABYTE GA-965G-DS3

GIGABYTE GA-965G-DS3 rev3.3 I love this motherboard!...Too bad it's in my friends new computer. It was easy to set up, looks like some very simple OC, and pretty colors. Only we have an issue with the SCSI + Raid controller driver. The gigabyte Driver on their driver disk, messes up the...
- DeathscytheHELL
- Thread
- Mar 20, 2007
- Replies: 136
- Forum: Motherboards
D
Motherboard and memory question

Thanks
- DeathscytheHELL
- Post #4
- Mar 12, 2007
- Forum: Motherboards
D
Motherboard and memory question

This is from a review of the Gigabyte DS3 motherboard most people are using. Will this actually be necessary if I use the Super Talent DDR2 800 recommended, I ask because it is 2.2V. there doesn't seem to be many options of 1.8V memory sticks out there
- DeathscytheHELL
- Post #2
- Mar 9, 2007
- Forum: Motherboards
D
Motherboard and memory question

When searching out the motherboards and memory listed here January 2007 Buyer's Guide: Midrange Menagerie I came across this warning on the motherboards specifications on newegg: Since none of the memory list the same numbers listed in the notice, How much does this affect me since I...
- DeathscytheHELL
- Thread
- Mar 5, 2007
- Replies: 3
- Forum: Motherboards
D
Torrents and IRQ Problems

Amazing how clean it is when I read through your WHOLE download instructions! :) Is there any information in the dump report about personal info?
- DeathscytheHELL
- Post #6
- Oct 6, 2006
- Forum: Computer Building
D
Torrents and IRQ Problems

This problem has reated it's ugly head, once again This time it doesn't show up at all in the event viewer as a warning or error anymore, and hasn't showed it's ugly head in the hour that I have messed around looking things up, downloading and running the debugger, and making this post. over an...
- DeathscytheHELL
- Post #4
- Oct 6, 2006
- Forum: Computer Building
D
delete

Bump :P
- DeathscytheHELL
- Post #3
- Sep 30, 2006
- Forum: Computer Building
D
Torrents and IRQ Problems

Old computer: p4 2.0, 640 pc800 Rambus, Netgear Fast Ethernet switched from 3 Com Fast Ethernet, Windows XP Sp2 firewall off, behind NAT Bit Torrents: Azureus crashes system on install and run So I used to use Edonkey BT Recently using Shareaza When I used to use edonkey on the old...
- DeathscytheHELL
- Thread
- Sep 30, 2006
- Replies: 7
- Forum: Computer Building
D
Help with my External Enclosure

Recent developements are: The Disk is now readable, no file system CHKDSK doesn't work past 25% I have tried recovery with PC Inspector, a free download from Downloads.com Most stuff can be found, however large chunks are missing, and most can't be recovered by PC Inspector. Any...
- DeathscytheHELL
- Post #6
- Sep 8, 2006
- Forum: Computer Building
D
hard drive corrupt/unreadable

While My hardDrive of recent failure isnt help by this, try Downloads.com PC Inspector
- DeathscytheHELL
- Post #2
- Sep 8, 2006
- Forum: Computer Building
D
Help with my External Enclosure

When Plugged into an IDE cable, after checking BIOS to make sure everything is hooked up right. My Computer still hangs just past the Windows Splash screen and before the desktop kicks in. Also get a 3-5 Minute hang when checking My Computer. But rest of system is fine. When I check...
- DeathscytheHELL
- Post #3
- Sep 6, 2006
- Forum: Computer Building

RESOURCES

Top Bottom