Thanks for all the advice.
I went ahead and ordered an xp333-R from webuildpcs.com today
they said it was rev 2.1
hope im not dissapointed.
thanks again
Just wondering what you guys think
I want to upgrade my board and memmory
I was going to get some of that kingmax ddr 333 with the -05 rating marked on it ive heard good things about it.
Should I pair it with the IWILL XP333 board i could get right now or wait for a good board sporting the...
Just wondering what you guys think
I want to upgrade my board and memmory
I was going to get some of that kingmax ddr 333 with the -05 rating marked on it ive heard good things about it.
Should I pair it with the IWILL XP333 board i could get right now or wait for a good board sporting the...
I kinda had the same problem and I noticed If I tighten the screws a little more It worked.
make sure not to tighten to much for fear of crushing the core
I just ordered the 1.33ghz "c" athlon they said they are backordered for a couple weeks so im hoping the SWIFTECH mc462-a will bring that temp down and I will be able to get this cpu to at least 1.6GHZ!!!!
they also said the temp was about 60c which to me is way tooo high so if they got that down im sure it would hope it would go further. remember "ITS THE HEAT THAT KILLS"
I have just found out last night by using this trick to get liveware installed. and now all of my ultra dma has been disabled and cannot enabled it could anyone give me some tips on this.
P4 dont have a great memmory subsystem I will agree with you there its just the rest of the processor that sucks. including the arm and leg you have to give to pay for it.:Q:);):P:cool::P;):):Q:);):P:cool::disgust::frown:
[ WCPUID Version 3.0 Beta1 (c) 1996-2001 By H.Oda! ]
Processor #1 : AMD Athlon (Model 4) / B1BBF9DE
Platform : Slot A or Socket A
Vendor String : AuthenticAMD
CPU Type : Original OEM Processor (0)
Family : 6 (7)
Model : 4 (4)
Stepping ID : 2 (2)...
Make sure that crossconnect cable is good it only takes one wire in the cable to go bad to make the connection buggy. and thats what it sounds like to me is happening.
make sure both computers have tcp ip installed for the network card
and the only settings for tcp/ip that you should be...
I just spent the whole night on the phone with creative tech support. and
finnaly got a fix
They suggested a million things that ive already tried and nothing and then
this one tech said try installing liveware by typeing in the command prompt
setup /w
and guess what it worked
and now I...
I couldnt seem to get liveware 3 installed on my ka266 for my
sblive value card without the system locking up in win98se.
even tried just downloading the drivers and they locked up too.
so I got an RMA and the board they sent me back is the latest rev
board -05 ver 1.3 it supports vcore...
I thought It was just because maybe I had an old revision of the ka266. and I RMA it for the new revision ver 1.3 that supports vcore adjustments and vmem adjustments which I love by the way but still cant get liveware to instll without locking up my pc. or the drivers that support 4 speaker...
I would like to know because I cant seem to get liveware installed and even downloading and installing just the drivers from creative locks up my pc. However I can I can load the drivers manually and they work no problems only I cant figure out how to enable the 4 speaker support so my FPS2000...
good question
I wish I had the answer but I dont and I desperately need it
is there maybe a registry hack that alows for this
anyone??
the reason I need it so bad is that liveware always locks up my pc when installing
I get this funny popup box when installing liveware that just has two...
The air coming off the fan is from the heatsink. Which if it is not seated flat on the proccessor is not going to be even warm because its not touching the HOT CPU. You either chiped a corner off the cpu or the heatsink is not sitting on the cpu. Try taking the heatsink off and inspecting the...
If your friend was going to go with AMD he should have went with newer technology amd parts not older. Furthermore he could have spent alot less and just upgraded his processor on his old board and seen the same results that his is seeing with his new board and k6-2.
Anyways that utility should let you see and manage all partions on every drive in your system while Win2k. If you still can't see the partions in that util but you can in WINME then there is definately a problem with your OS and you need to contact MS on that.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.