thisis the deal.. I've got a scsi cdrom and burner. they are both very unstable.. and the cdrom keeps polling all the friggin time.
I also have trouble with the puter hanging.. for justa few secs.. and then it comes back.
It says ther aren't any conflicts but I doubt that. And it reports that...
I have a celeron2 900mhz on an Asus cusl2 mobo.
When I copy files from 1 drive to another I get 97-99% cpu usage!!
the whole puter also "hangs" sometimes after disk access.. for a few seconds. Most annoying. Anyone have any idea why these things happen??
I am using 1 Ibm deskstar...
I'm looking to change my Celeron 2 900mhz, cusl2 setup for a dual p3 1ghz solution and I am going to use the following components.
Abit vp6 mainboard
2 p3 1ghz
256mb mushkin pc 133 memory
1 ibm 30gb 75gxp
1 seagate 28gb 7200 rpm
1 samsung dvd rom
Creative tnt 2 ultra graphics card
tekram...
I read the Intel Developer Forum Conference - Spring 2001: Part 1 .. It is stated there, and has been before by RAMBUS that RDRAM will let mainboard manufacturers use cheaper 4 layer pcb designs as opposed to 6 layer pcb.
But why are all current P4 maiboards 6 layer then?? (I am aware that was...
I read some other messages on here and apparently, yes some newer cpu's do add 5mhz to the fsb!!
Anyone know the batchnumber or anything for there news cpu's or anything else about this??
I saw that overclockers uk are selling a bundle with 1,1ghz t-bird @ 1400mhz(!!)and Abit kt7a raid plus fop32-1 fsf. I thought this speed was almost impossible to obtain!? Have AMD's yields improved vastly in the latest two months or what??
I was planning on getting a t-bird 1200 plus the same...
Does anyone have any idea what the chances are to hit 1350 (9*150mhz) with a thunderbird 1200 without supercooling?
Did anyone do this already?
I would be using very good aircooling but not water or anything like that.
I wanna reach something over 1200 cuz I HAVE to overclock it at least a...
Just wanted to add a little something. Farther down in this thread some ppl claim the p3 beats the Thunderbird clock for clock in 3dbench.
That used to be true but is it valid for KT133A and Amd760 based Athlon systems?
I would like to see a p3 1Ghz 815 board pitted against a thunderbird 1ghz...
I have an adaptec 2940 UW and an Hp Scanjet 4c scanner that I am trying to get to work and I have the weirdest problem. If I plug the scanner in it won't fire up!.. it's STONE DEAD!.. but if I unplug the cable it starts!!
I went to the store and got a new cable but the result is the same...
Just a little thought..
Everyone seems to take this news that the KT133A has 95% of the performance of the AMD 760 coupled with DDR as something bad! I can't really understand this at all!
It simply means that we can have an even higher performing system a lot cheaper and earlier than we...
Amd athlon 1ghz=2500 sek= 250 us dollars
Amd Athlon 1,2ghz=3500 sek = 250 us dollars
128MB pc133 = 64 us dollars!!!
athlon 1,2ghz, kt133a mobo plus 256 mb pc133= 630 us.. kick ass!
btw.. 630 dollars is 30 dollars more than a p3 1Ghz costs :o)
/patrik
I know.. pointless post but hey.
Hmmm.. Is it alowed for a company to totally control a market in the way that Rambus wants?? The memory industry is very important. Without memory the world would litterarily stop!
Will they really let one company control something as crucial as that??
Seems weird that they would since they...
I read a Via kt133-A review at www.viahardware.com and a Duron 600@840 at 140mhz fsb performs about 10% better in Quake 3 than a duron 850 at 100mhz fsb!! And this on a measly Geforce MX card. This means that a Thunderbird 1200 (150*8) would at least equal a DDR system in Q3!! It also means that...
I was looking at the updated and optimized Flask mpeg encoding benchmarks at Tomshardware again and I was just thinking.. Couldn't the ppl that are working on the Amd omptimization also optimize it for dual processing?
That would be very neat and I think that mpeg encoding is the kinda work...
The p4 seems to have lots of memory bandwidth and everyone keeps talking about the p4's quad pumped bus.. but.. but..From what I could see it is simply a dual channel rambus design. 2X1,6gb/sec equals 3,2gb/sec right?
So what about it is it that makes it quad???.. They don't call the 840...
I was just wondering why AMD won't make the bus 256 bits wide like intel has in the p3 and p4, instead of the 64 bits wide bus that they are using in the current Athlon processor. I think this could help performance quite a lot. Especially in streaming media apps and that is where the Athlon...
Just want to say that.. You are arguing that the p4 will be faster in the future.. yes this is true. BUT.. Won't Amd's processors also be faster in the future?.. Ofcourse they will be.
Someone said that the average joe only looks to the megaherz. I don't agree. There is one more thing he asks...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.