sk-7 w/80mm tornado
i wouldnt run above 1.8v but i cant even get their
if iam 75% stable at 2000mhz@1.7v
i should be stable at 1.725 or 1.75v
but like i said anything above 1.7volts is unstable with any setting 133x11.....etc
i tried the overvolt thing it locks the voltage at about 2v
and system doesnt boot same issue as 1.775 and 1.8v
why cant i achive stablity with any voltage above 1.7 ?
i am currently looking for a new mb choices are epox 8K3A or asus A7V8X
i have 2 tbred 1700+'s (jiuhb and jiucb)
both o/c to about 1900mhz stable jiuhb will do 2ghz but is about 75% stable @1.7v
voltage on MB is below 1.7v because anything more and system becomes very unstable
1.775 or 1.8 will lock before windows boots even when set at default speed 1466mhz
my MB...
would i pay $60 for this card no
but if you can pick up a cheap sdr gf4 mx there not bad cards
i got a pci and a agp sdr gf4 mx for 2 people this month i paid about
$35 for each and was very pleased with the performance of both the cards
this is my 11th year in the military and i fully support the anti-war
protest and if time premits would like to show my support
the man who fights for peace loves it the most
has for the pro-war people in this country please have your counter protests
i support their right to assemble but i...
get this i got a 1700+ b core from newegg today
100% unstable at default settings 1466mhz@1.6v
any other setting works fine
iam at 1824mhz@1.6v very stable
hoping for 2ghz
JIUCB02515
i have never had good luck with epox's warrenty service
this week i have been trying to rma a epox motherboard
after a few days of their song and dance they give me a rma #
the instructions said to include a $14 money order
having rma'ed many items i have never been asked to pay shipping
both...
Darwin and Wallace gave us natural selection not evolution it self
these men had plenty of other theorys that were ultimately proved
wrong origin of species is full of ideas that are way off
so do we through out natural selection because he was wrong about other things
Mendal lied about...
i would take the advice of mrhans and get rid of the psu
it may work for now but if it smells like its burning it is
psu's will go out slowly sometimes but when they go you dont want them plugged in to anything you want to keep
i lost a $1000 rig because i used a shitty psu but no more
i only...
AGOIA cores are palo's
1700+ tbred rev B should overclock much better but you will have to
wait for them
1800+ tbred rev A's are good if you are buying today they will do about 2ghz
i have a a7v333
last week my cpu died strange but ok it happens
it was a 1600+
the motherboard speech post thing said memory test fail
so i swapped the ram
same message
so i put the ram in my other system works fine
so i tried cpu in other system and no post
so i get a new cpu (i...
secondary ide channel on my a7v333 wont see 2 cdrom's at the same time
tried every possible combonation of jumpers and cables
os is winxp
bios sees both drives
xp only one or none
thanks for any help
lemcc
check asus's web site
but they have very little info about models other than the basic model
very little or its the wrong info
the only correct info about my p4s333-m was in the manual that it came with
good luck
exp
<< Any news on that P4S333-M? If you haven't returned it yet >>
i am returning it
the web site i ordered it from listed features found on the p4s333
so like alot of people iam think about what MB is the one to get
leaning toward p4s333
p4s333-m
this is not the mb you want to buy
under overclocking in the manual
fsb 100-166
fsb/mem ratio
thats it no voltage
M stands for Must be returned
nothing about voltage
tried to run up fsb but locks up above /35 pci both 106/35 and 138/35
so its not cpu or ram holding it back the video card and modem both ran fine on my last system with a fsb of 150
i would flash bios to see if i could get some voltage settings but cant find this mb on...
ok i got my 1.6a and p4s333 today
ran it up to 2.13 no problems
voltage is at 1.5 would go higher but cant find voltage setting in bios
i can change fsb and memory ratio
do i need to flash my bios
btw its a p4s333-m
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.