And now it's resolved! The word of advice to anyone with this problem: make sure you try ALL USB ports on your PC case. Some evidently support the wake on USB with a device behind multiple hubs/cables and some don't. (And the keyboard/mouse may work just fine behind all ports while still the...
Thanks, now my mouse triggers the wake from sleep when it's connected to hub 1! It's just that on my old setup with exact same gear (just older motherboard) I did have mouse wake from sleep working when connected to chained hub 2 (monitor). Just wondering if there's some setting I could try to...
Good remark about "wake by" and "power on by".
My PC is very new. Now I found out that if I connect a USB keyboard directly into the tower USB ports, it wakes up normally from sleep. However, if the device is after one or two USB hubs, they don't wake up. But, I've used the exact same devices...
I have Asus Prime Z370-A and it seems that it may not support waking up a computer on sleep by USB mouse/keyboard (and there is no PS/2 port so that's not an option either). This USB wake feature seems to be not really documented, which is terrible. This is one of the most important features to...
I am still fighting this problem. Now I found something that completely flabbergasts me. I have two of these PSG90231 9-to-6 FW adapters and if I use TWO in a chain (not direct chain but on cable's two ends), there IS connection. If I use just one, there is NO connection!
I have confirmed my...
Almost exactly that drive. But the drive is not only working over USB (didn't try eSATA), but it is working over all of the FW ports it has, just without the problematic adaptor. (What I'm trying to accomplish is get the adaptor working with any device but the hard drive and the RME is a good...
This is LaCie Quadra hard drive with a power supply connected. But I also tried another device (RME Fireface 800). There is no life whatsoever if the PSG90231 is used somewhere between computer and the device. Would be nice to hear if someone has actually got this adaptor working.
I tried with...
I bought a PSG90231 FireWire 9-pin Female to 6-pin Male adapter. This one: http://cpc.farnell.com/1/1/70967-adaptor-firewire-9p-f-6p-m-psg90231-pro-signal.html
I connected my FW cables to a hard drive, using the PSG90231 adaptor. My hard drive has both, 6-pin and 9-pin ports so it's a good...
Thanks all! I ended up buying http://www.transcend-info.com/Products/No-402 (Transcend USB 3.0 HUB) with a power supply. I placed it after the 5 meter active but non-powered USB 3.0 cable after all.
I also realized that my Dell U2713HM monitor has a passive USB 3.0 hub, not active.
I can get...
I have a setup where I have no choice but to have a USB 3.0 cable go over a 5 meters of length from a cabinet (computer) to top of desk. First I had just a 5 meter passive USB 3.0 cable from computer to my monitor Dell U2713HM which has a USB 3.0 hub. Devices connected to the monitor hub that...
Then I have to ask the same question: how do I know that G400 is free from the problem? As said, my MX518 suffers from the same problem partially, so I'm very skeptical (for a reason).
My goodness. Thank you for the information. So it seems there are a few lucky who have working units. It's just that I have already bought and returned 3 times, so I have to start questioning my sanity at some point if I keep ordering again.
When I asked Logitech directly, they said that they...
Thanks, but how do you know Amazon has a flawless batch? As I wrote, I have already tested 3 units and the small buttons are faulty. Not from Amazon, but from two different shops. All 3 units had the same problem (also my old MX518 has the same problem).
I have been looking for a working G400s mouse for ages, but have not been successful. At least 3 units I tested all had the same problem where some of the small circular buttons don't work every time when pressed. If you press with normal pressure, it may not register even it clicks. If you...
The PSU is Corsair AX650W, 2 years old. However that was eventually unrelated. I could do "powercfg -devicequery wake_armed" and these were listed:
HID Keyboard Device (012)
Logitech HID-compliant G3/MX518 Optical Mouse (009)
Logitech HID-compliant Unifying keyboard (003)
Now that I played...
I have had a problem for years where my desktop PC wakes itself up due to static electricity. It gets worse in winter (on cold days). I have isolated the problem to a certain USB device or USB cable. I have a USB hub with four devices, one of them is a USB printer. When I disconnect that, the...
Ok now I have pulled all my hair incl. scalp out several times, but perhaps it's time to start growing the hair back. Indeed, this ridiculous thing called Marvell controller seems to have been the culprit. I just put my two SSD drives onto the Intel SATA ports and put two HDDs onto the Marvell...
Hi all! Thank you for great answers. Sorry, I haven't yet turned off my computer since yesterday, I can boot to another hard drive, that will tell much.
But since you asked, here are some answers:
- I am using the booting C: (Samsung 840) on Marvell's controller at the moment.
- There is no...
ShintaiDK, by eventlog do you mean Event Viewer / Windows Logs / System? There I could not find anything helpful because the time starts at somewhere when the Windows is already probably loaded (which is when everything works already).
Once I have to turn off my computer completely next time...
I have:
- P9X79 WS motherboard
- Intel i7-3930K
- Gigabyte GTX 970 Mini
- (also RME HDSPe AIO audio card + Sunix UFC2412 PCIe Firewire card)
My problem started perhaps two years ago when I started to feel there's something strange with my bootup sequence. It randomly took a long time...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.