Search results

  1. A

    Google fiber and cloud storage

    I was just reading about google fiber and found out Google gives you along with fiber, 1 tb of storage in the cloud. So basically with a fiber gigabit connection, google drive would be like a nas? Seems like an interesting concept. And also I'm guessing Google drive download and upload speeds...
  2. A

    Wndr4500 slow 2.4ghz band

    When I have a device connected to the 5 ghz band its works fine and I get 130mbps on speed test. However, on the 2.4ghz band I get max of 50mbps and this always changes to sometimes the connection being so slow nothing loads. I even tried putting my phone 1 foot away from the router and nothing...
  3. A

    2 seperate networks. One internet connection.

    The second network is so people on the first network can't access the second network such as when guests are over. Also, if the first network was to become infected with a virus, it wouldn't affect the second network. The first network is almost like a dmz
  4. A

    2 seperate networks. One internet connection.

    Well I'm creating a home network. And I'm wiring the house with cat 6 to have an Ethernet jack in each room. The second network is then for my server running as of now a website and also for a nas which stores a lot of pictures
  5. A

    2 seperate networks. One internet connection.

    I just realized: would all I need be a sepereate/ dedicated firewall which would connect to a port on my existing router and then any device connected to the firewall would not be accessible from the any device not connected to the firewall?
  6. A

    2 seperate networks. One internet connection.

    What problems would arise if I configured it correctly?
  7. A

    2 seperate networks. One internet connection.

    So I did some research and I'm not sure of what I have understood is right: If I connect the second router, whatever it may be, to the first router lan to lan, and setup some IP address stuff and get it working, then the second router should even be able to access the first router and all its...
  8. A

    2 seperate networks. One internet connection.

    I think I forgot to mention, but I'm buying an old wrt 54gl off eBay to have a second router. How would I go about doing something like this with 2 routers. And the part where the main network has access to the other but not the other way around doesn't have to happen but if it could that would...
  9. A

    2 seperate networks. One internet connection.

    In our house, I have one Comcast cable coming in that is connected to a modem. The modem is then connected to our router. I am in need of two separate networks. Since our main network will have a server, a nas, as well as my PC connected to it. The second network will have everything from...
  10. A

    Guest network setup on netgear router

    I have the netgear n900 router. To this router, I have connected a few servers, nas, and also wireless devices of anyone in the house. I have it setup so that the servers and nas are on the main network while everyone else is using the guest network which I enabled in the settings. So here's...
  11. A

    Canon dslr video lenses?

    True. Are there any canon eos lenses that have better stabilizers than others?
  12. A

    Canon dslr video lenses?

    I've already done that
  13. A

    Canon dslr video lenses?

    I have a canon 60d. From what I'm aware of, the 60d cannot autofocus continuously while taking a video regardless of the lense? What I mean by this is that it can't autofocus like a camcorder would or even some other dslrs I've seen such as the t5i. Also, I currently have the kit telephoto lense...
  14. A

    Splitting cat 6 cable

    Wow thanks for that information. I didn't know Ethernet cables worked like that. Where there's 1gb link up and down
  15. A

    Does this seem like a reasonable network setup

    I'm upgrading my network and here's my plan: in the basement, their will be a few servers, a nas, a gigabit switch, the modem, our voip Vonage box, and the patch panel. Then, on the main floor of the house in the living room, their will be a Ethernet cable coming from the basement to the living...
  16. A

    Splitting cat 6 cable

    LOL at that price that's not happening. I think I'll just run one cat 6 cable and use a gigabit switch in the living room. Then from their I can run another cable to the room with the PC and also just connect everything to the switch.
  17. A

    Splitting cat 6 cable

    Ok I'm just gonna explain my whole network setup: modem in basement connected to router in basement. Gigabit network switch connected to router. Servers,nas, and patch panel connected to this switch. Now, from what the conclusion seems to be is this: to my living room, I run one cat 5e or cat 6...
  18. A

    Splitting cat 6 cable

    Yes and my internet service is only 130Mbps. I need that 1gb connection for my PC only because of local file transfer a which I will use a lot.
  19. A

    Splitting cat 6 cable

    I have a PC that needs a dedicated 1gb connection. And the rest of my devices are fine with a gigabit switch. So that's why.
  20. A

    Splitting cat 6 cable

    I already said this. I don't want any device to run at 10gb. I only want to use a 10gb cable and split its bandwidth among let's say 10 1gb Ethernet cables
  21. A

    Splitting cat 6 cable

    Two my understanding a hub just splits the speed. So a gigabit Hub with let's say 5 ports would give each of the 5 ports 100mb speed regardless if a device is using their 100mb or not
  22. A

    Splitting cat 6 cable

    Yes that's what I need. How come they don't make any 10 gigabit hubs? That would easily solve my problem and be so cheap
  23. A

    Splitting cat 6 cable

    Misread it. So I guess I'm out of luck even if I chose to buy it
  24. A

    Splitting cat 6 cable

    I could do that, but I think you misunderstood the problem. The reason I'm running a cat 6 cable was so I only have to run 1 cable and utilize the speed of it and connect up to 10 devices and maintain 1 gigabit for each device. I don't really need any device to run at 10 gigabit speed
  25. A

    Splitting cat 6 cable

    Well I found this cisco switch for 170$ Cisco SG300-10 10-port Gigabit Managed Switch (SRW2008-K9-NA) https://www.amazon.com/dp/B0041ORN6U/ref=cm_sw_r_awd_CxUiwb20V02J7. But then I will need 2 of these and that's too much to spend since I need connect one end of the cable to this in the basement...
  26. A

    Splitting cat 6 cable

    The cheapest switch I found is a Cisco 10gigabit switch for 170$. Seems a bit too expensive since I'd be better off spending less by running seperate cat 5e cables to each device. But that would be a lot more difficult to do in our house.
  27. A

    Splitting cat 6 cable

    But what I'm trying to do with all this is have the infrastructure of my house be cat 6 and one cat 6 cable for all the places in my house since it would have enough bandwidth. I also need devices like my pc to have a sepereate gigabit connection since I will be doing file transfer with it.
  28. A

    Splitting cat 6 cable

    Well the setup is that in the basement I have all my network and I'm wiring the house to plug devices like our tv, Apple TV, and PS3 and also pc in another room. So I thought their would be a way I could run one Ethernet cable to our living room and use a cat 6 Hub to connect all other devices...
  29. A

    Splitting cat 6 cable

    But I don't need a switch, all I need is to split a cat 6 into seperate 1gb cables since one cat 6 is 10gb
  30. A

    Splitting cat 6 cable

    Not necessarily? U can get a hub for cat 5e and split 1 cable into more than one. Are there any similar stuff for cat 6 that split it into cat 5e
  31. A

    Splitting cat 6 cable

    If I'm wiring my house with cat 6, can I just run one cat 6 cable down my house to my basement and then split each end of the cat 6 cable into 10 cat 5e since cat 6 is 10gb and cat 5e is 1gb?
  32. A

    Automated remote desktop session time limit

    Well i dont want a client to reconnect again. Its a paid service and the password needs to change everytime a user connects
  33. A

    Automated remote desktop session time limit

    I would really appreciate if someone could help me as this would require programming maybe an application that would run in the backrground. I dont really know how to program so someone help. Thanks
  34. A

    Automated remote desktop session time limit

    Right now im running windows 10 enterprise on a vm using hyper-v. On this vm, i want a user to be able to connect with a code or password and then be automatically disconnected after 2 hours. I would like the 2 hour timer to run even when the users not connected. Also, i want a new code or...
  35. A

    Question about analog and digital audio

    Yeah thats why i don't know why companies don't just use rca on most condenser Mics. I have a condenser mic and theirs always a buzzing because of the 3.5mm jack having connection issues because they dont last
  36. A

    Question about analog and digital audio

    Ok thanks
  37. A

    Question about analog and digital audio

    So i have the soundblaster recon 3d pcie. Im guessing if i got a usb dac, it wouldn't really make that much of a difference? Im also thinking of getting an av receiver to connect speakers and everything into. So an optical cable to the av receiver from my soundcard should be just fine. Right?
  38. A

    Question about analog and digital audio

    Another question. Lets say i have a blu ray player or soundcard, with a good dac. Lets say this blu ray player or soundcard then has a digital output (optical) if i connect this blu ray player or soundcard to a speaker with optical connection and analog connection, would it be better to use...
  39. A

    Question about analog and digital audio

    S/pdif i believe means its digital. The connector can then be optical (toslink) or coaxial which i believe can work with any rca wire, correct?
  40. A

    Question about analog and digital audio

    Wow thanks for all that info man. Also, are rca connection for audio, left and right better than a singal 3.5mm connector for left and right. If their is no difference, how come some higher end soundcards and most amps have rca instead of 3.5mm jack
COMPANY
RESOURCES
FOLLOW
Top Bottom
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |