Search results

  1. J

    Testing a low end card is it working properly

    I have an older intel quad xeon 775 2.5g system with an nvidia gts 250. I am looking for tests that confirm the graphics card is working properly. I was able to run the latest version of furmark without problem but would like a few others (free) tests or demos that this card should be able to...
  2. J

    Dreamweaver upgrade

    Looking for the most cost effective upgrade. Coming up from Macromedia Dreamweaver MX v6.0. The current pricing on Ebay for Dreamweaver CS3 v9 seems to range on the low end between 60-85 for a used retail copy. Thats my budget range. Does that pricing seem okay or should I be looking...
  3. J

    Where to find a 1156 Motherboard?

    If you are not ocing try here http://oemxs.us/shopping/index.php?subcats=Y&status=A&pshort=Y&pfull=Y&pname=Y&pkeywords=Y&search_performed=Y&cid=0&q=1156&x=-696&y=-122&dispatch=products.search#2
  4. J

    xp install on ssd - need post failure instruction

    secure erased w/ parted magic set up w/ Win 8 in usb attached enclosure installed in desktop started xp sp1 install with driver from MSI website , measured then upgraded to latest driver from AMD website from "2013", measured then upgraded to driver that was custom modified dated 2011...
  5. J

    xp install on ssd - need post failure instruction

    forgot to mention i did the offset and the alinment at the beginning after the secure erase
  6. J

    xp install on ssd - need post failure instruction

    okay this is where it stands now I found a driver to install with F6 at the start of XP installation someone custom modified it -dated DEC 2011 Drive is aligned but I will re-check it. Also given proper offset. Was zero written (secure erased) after a failed cloning attempt from a hard drive...
  7. J

    xp install on ssd - need post failure instruction

    Using 64gb ssd as boot for refurb of desktop want to make sure it is set up properly. tried cloning with included acronis software in kingston ssdnowv200 kit. Checked and saw that ssd was still using ide mode on motherboard - msi 785gt-e63. Found AHCI in Raid settings(...
  8. J

    cbl modem->cable router to get wireless and add ports - Help with settings

    was reading here http://www.tomshardware.com/forum/41083-42-using-cable-modem-cable-wireless-modem-router and it seemed like it might work The modem belongs to someone else didn't wan't to remove it just add what I needed from a part I already had cg3000d
  9. J

    cbl modem->cable router to get wireless and add ports - Help with settings

    Howdy all, I need to take the signal from a standard cable modem and pass it to a cable wireless router netgear cg3000D ( For reasons beyond my control I can't just replace the modem with the wireless cable router). I hope to add a wireless signal and a couple ports by doing this...
  10. J

    Refurb Pc into a nas box

    unfortunately board will only use 4gb memory
  11. J

    Refurb Pc into a nas box

    Looking for a low cost way to add some major storage space. Have an unused pc (case,pwr,mobo - IPILP-LC ,dvd,sata2 ports, onboard video,pciex16 Not really concerned about raid or keeping back ups, just want maximum space accessable over a network. Is it as simple as putting large drives...
  12. J

    DEAD: Smoking Hot Microcenter shippable 2500k's $140 plus shipping!

    Got it. Missed out last time - $99 deal. Was going to atlanta but couldn't be sure I'd get to the store so I waited untill I knew I could make it there - and of course they were labeled as sold out on the web page then so I didn't even try. Found out later that you could still get them if you...
  13. J

    Credit to Selma/Slickdeals - Amazon Parts Sale

    Wish I had some money right now. Up to 60% on PC Components :SanDisk ReadyCache 32 GB SATA 3 Solid State Drive $40, Kingston HyperX 3K 120 GB SSD $60, Kingston HyperX 3K 240 GB SSD $155, D-LinkRouter $64 and several others...
  14. J

    Lenovo ThinkCentre M90z / M70z AIO Desktop PCs recalled due to fire hazard

    Credit to Dealnews.com http://slickdeals.net/?sdtid=4365856&sdop=1&sdfid=9&trd=http+support+lenovo+com+en+US+d+T071924+rd&u2=http://support.lenovo.com/en_US/detail.page?DocID=HT071924#rd
  15. J

    Antec 450 watt power supply $29.99 @ Best Buy Model: VP450 SKU: 4070566

    http://www.hardwaresecrets.com/article/Antec-VP450-Power-Supply-Review/1487 Hardware Secrets says it's good stuffs for a basic system
  16. J

    Portable PC for 20 something niece - need recommendations - time is of the essence

    Ladies, Help me out here I have an early twenty something niece who wants a portable computer. She believes she is willing to spend up to $500 for the ideal machine. My challenge is that ideal means it caught here eye as unique, or different, combined with meeting an acceptable level of...
  17. J

    PCP&C Silencer 750 - $39.99 + shipping (refurb)

    Read this. http://www.hardwaresecrets.com/article/PC-Power-and-Cooling-Silencer-750-Quad-Power-Supply-Review/553/1 Might have to get one. must resist...... must resist...... might resist.......why resist?
  18. J

    Need Imaging Software for Multi Boot on Laptop

    I currently dual boot a laptop with Vista (installed first)/XP Pro and will probably at some point either add a win7 or switchout win7 for Vista and would also like to have a partition to experiment with linux. I am upgrading to 500gb hd from 120gb. Is there a hd cloning tool that will...
  19. J

    Need help locating source for locking cable clip

    No. you just break off the existing tab of a standard cable end,put the clip where the tab was, and insert into the jack.
  20. J

    Need help locating source for locking cable clip

    Howdy all, I need to locate a cheaper source for this part. http://tv-allowance.com/netprotector_tamper_clips.html It allows you to remove the little plastic tab on a rj45 connector, put the part in place and then when the connector+part goes into the female jack it locks in place to...
  21. J

    Directron - Cheiftec Midtower (older) - w/custom paint- $19.99 w $14? shipping

    Directron - Cheiftec/Antec Midtower style design (older) - w / custom paint jobs - $19.99 w $14? shipping For the right person these cases will be a steal Cheiftec/Antec style design - its a bit older but I expect any decent builder can work around any shortcomings (80mm fan openings...
  22. J

    Not a Deal - Just Asking - XP PRO Versions $50-$70 on Ebay -Legit or No ?

    If this is a bad idea/wrong forum or likely scam or cannot be posted here let me know. Can't ask here. This is only for posting a hot deal that you found to share with others. esquared Anandtech Senior Moderator
  23. J

    Planning for networking to use printers and share internal drives

    I am starting a project to get some printers and pcs on a small home network. Desktop / XP / multiple harddrives internal USB laser printer usb / inkjet 1 usb / inkjet 2 usb / scanner using a driver patch / trick to work with xp wireless router located nearby xp laptops / secure...
  24. J

    Is sharing internet connection through a single computer the answer to this problem?

    I am currently using an internet filtering service that requires that each pc have the software loaded that works with the servers that keep the list of acceptable sites. I would like to know if there is a way to set it up so that my cable codem feeds one computer running the software and that...
  25. J

    Off Topic - Anyboby remember this site - Help

    lists used pc's sortable by price processor speed hd size etc. - has the type and line drawing in red of a guy using a bull horn at the top of the page. I googled and asked but can't find it again. Stan
  26. J

    Ps2 mouse not working...details inside

    Howdy all, Chaintech vnf3-250 win xp xpro 512mb ram sempron 3100 oced from 1800 to @2385 stable with cpu burn and memtest 86 All was fine until I hooked the pc up to a kvm switch with another pc which was not booting that I wanted to work on. After I unhooked the kvm the new pc would...
  27. J

    Antec Cases B stock on sale

    Ripped from SlickDeals.net Credit goes to Askjosh Antec B site Antec's B stock comprises channel returned products that often were not opened or had no need to be refurbished. But Antec will not sell these as new product, so instead we've marked them down and offer them as B Stock in...
  28. J

    WIP: Karaktu's (and Zap's!) Unofficial Guide to mobile Celeron overclocking success!

    Have a question for you guys. I'm using a mobile celeron 1.6 on a biostar pt800 The sound craps above 107 fsb so I'm having to settle for stock speeds but that's ok this is a charity build. My problem is that with the last software installs, warpspeeder - biostar overclocking program and...
  29. J

    stb velocity 128 (riva 128) or ati rage 2c which is better

    rebuild for a friend, both are available . I looked around on the net and didn't find much to make a clear choice between the two. Anybody remember which would be better?
  30. J

    WIP: Karaktu's (and Zap's!) Unofficial Guide to mobile Celeron overclocking success!

    EP-4G4A+ EP-4SDA5+ EP-P4MKI-S Anybody familiar enough with these epox boards to know if they will overclock mobile celerons or mobile p4s?
  31. J

    Let it Die - iWinME no mouse unless boot in safe mode?

    went ahead and reloaded the os to make certain that mobo saw the ps2 perts - Thanks Anyways\
  32. J

    WIP: Karaktu's (and Zap's!) Unofficial Guide to mobile Celeron overclocking success!

    Need a quick opinion which is better a c4 2.9ghz @ 645fsb or a c4 3.2ghz @ 533 or c4 3.0 @ 800fsb? assuming all are stable with reasonable voltages ?
  33. J

    Let it Die - iWinME no mouse unless boot in safe mode?

    tried generic setting - same result tried microsoft ps2 mouse with com port adapter - detected as ps2 mouse - same result Should I expect an add in usb2.0 card and usb mouse to fix this or are there other things to try first?
  34. J

    Let it Die - iWinME no mouse unless boot in safe mode?

    bump for an answer please
  35. J

    Let it Die - iWinME no mouse unless boot in safe mode?

    I attempted to do a manual install because the os did not detect the mouse when I went throught add new hardware and tried the auto- detect. I picked from the harware list and wound up with two yellow ! in the control panel hardware list after rebooting but no mouse at the desktop.
  36. J

    Let it Die - iWinME no mouse unless boot in safe mode?

    ECS k7s5a duron 1000 128mb pc100 Win ME In normal mode no mouse, hardware listing shows mouse with exclamation indicator in yellow circle, if you use the keyboard to navigate down to it in the list, the list closes when you hit the enter key with the mouse highlighted. In safe mode I...
sale-70-410-exam    | Exam-200-125-pdf    | we-sale-70-410-exam    | hot-sale-70-410-exam    | Latest-exam-700-603-Dumps    | Dumps-98-363-exams-date    | Certs-200-125-date    | Dumps-300-075-exams-date    | hot-sale-book-C8010-726-book    | Hot-Sale-200-310-Exam    | Exam-Description-200-310-dumps?    | hot-sale-book-200-125-book    | Latest-Updated-300-209-Exam    | Dumps-210-260-exams-date    | Download-200-125-Exam-PDF    | Exam-Description-300-101-dumps    | Certs-300-101-date    | Hot-Sale-300-075-Exam    | Latest-exam-200-125-Dumps    | Exam-Description-200-125-dumps    | Latest-Updated-300-075-Exam    | hot-sale-book-210-260-book    | Dumps-200-901-exams-date    | Certs-200-901-date    | Latest-exam-1Z0-062-Dumps    | Hot-Sale-1Z0-062-Exam    | Certs-CSSLP-date    | 100%-Pass-70-383-Exams    | Latest-JN0-360-real-exam-questions    | 100%-Pass-4A0-100-Real-Exam-Questions    | Dumps-300-135-exams-date    | Passed-200-105-Tech-Exams    | Latest-Updated-200-310-Exam    | Download-300-070-Exam-PDF    | Hot-Sale-JN0-360-Exam    | 100%-Pass-JN0-360-Exams    | 100%-Pass-JN0-360-Real-Exam-Questions    | Dumps-JN0-360-exams-date    | Exam-Description-1Z0-876-dumps    | Latest-exam-1Z0-876-Dumps    | Dumps-HPE0-Y53-exams-date    | 2017-Latest-HPE0-Y53-Exam    | 100%-Pass-HPE0-Y53-Real-Exam-Questions    | Pass-4A0-100-Exam    | Latest-4A0-100-Questions    | Dumps-98-365-exams-date    | 2017-Latest-98-365-Exam    | 100%-Pass-VCS-254-Exams    | 2017-Latest-VCS-273-Exam    | Dumps-200-355-exams-date    | 2017-Latest-300-320-Exam    | Pass-300-101-Exam    | 100%-Pass-300-115-Exams    |
http://www.portvapes.co.uk/    | http://www.portvapes.co.uk/    |