Thanks for the feedback.
I just did some research and I think either mATX or mITX would be fine and smaller than what I currently have. I'm not interested in a laptop.
These look really cool! The VivoPC seems a bit less powerful than I wanted, but the Brix is more capable. The...
I've been out of the computer market for a while, so I'm pretty rusty. My current machine was built back in early 2008 and it's a full-size desktop with:
Core2Duo E8400
4GB RAM
GT9600
etc
I'm looking to upgrade to a newer computer, and ideally I'd want something:
- Smaller
- Some...
I was able to get the ntpd <-> gps link working last night with some help from a gpsd mailing list. I had to compile ntpd from scratch so it would include the SHM (shared memory) driver to access the GPSD time.
The issue I'm seeing now is that the GPS reported time is ~24 seconds ahead of...
It should be the right IP. GPSD makes that information available to that address, according to a few different websites such as:
http://www.lammertbies.nl/comm/info/GPS-time.html
Hi,
I just purchased a USB GPS device looking to extract time information from GPSD and pass it to NTPD to get an accurate system clock. I'm using Ubuntu 10.04 LTS.
I believe the GPS is working because I can run xgps and see the satellites/time info/location/etc.
However I can't quite...
I'm going on a trip which leaves from JFK at the beginning of February, but I have to schedule a connecting flight to JFK airport first. I've never been to NYC before, is it worth visiting for a few days even if I'm going to freeze my ass off? Any recommendations on things to check out/see at...
I didn't get air in the line, but it did seem like there were bubbles of air coming out of the line (for the one brake pump we got in). That could explain why my brakes have always felt mushy.
I only bled a very little bit, so the resevoir was still practically at max. I know I didn't complete the job, since the pedal wouldnt come back up, I just decided to hold off for another day (possibly the same day when I attempt to replace my pads and rotors).
My car (04 Accord, manual trans), needed some maintenance so I decided to give it a shot myself yesterday. This was my first time working on a car so I expected some issues to popup. I changed the transmission fluid, rotated the tires, and was going to try and flush the brake fluid.
First...
I've made ice cream a few times following the Alton Brown base and it's always turned out well: http://www.foodnetwork.com/recipes/alton-brown/serious-vanilla-ice-cream-recipe/index.html
I've got a manual 4-cylinder 2004 Accord with almost 30k miles. It's been hard to follow the service manual since I hit the year markers long before I hit the mile markers. All I've really done up to this point are oil changes and tire rotations. I'm going to replace the air/cabin air filters...
Im flying into London with a friend and visiting France and Spain for 2.5 weeks. I'm pretty sure I want to visit Paris and Barcelona but don't really have a clue of what other cities to see or specifics of what to do yet. Any recommendations? This will be at the beginning of May...
Thanks!
I'm planning to dry mount some photos I had printed, but the tissue paper I have is 8x10, whereas some of the photos are larger (18x12). Will it be more difficult to mount/turn out poorly if I use multiple sheets of tissue for a single photo?
Thanks!
I know you are looking for further information about technical analysis, but if you haven't read "The Intelligent Investor" yet, you really should. It will definitely give you a more realistic perspective on things.
I had PRK done about 5 months ago. My vision is excellent now >20/20, and there were no long lasting side effects. No halos, dryness, etc. The first few days after the surgery were a bitch though.
Yep, 2:30 a side on med-high heat. Coated them with olive oil, s+p, rosemary before cooking. Poured a mix of honey, balsamic vinegar, garlic, olive oil over it after.
At the gym one of my coworkers told another that he thought I was on steroids :) I've upped my calorie intake to 4-4.5k for the past two months and I guess it has really helped.
zoo, animal park, balboa park, seals at la jolla cove, visit the midway, gaslamp district at night, check out the beach cities (del mar, encinitas, solana beach), sea world, etc
I used the jointer to get my first two perfectly flat reference edges from pieces of wood that were 'rough' lumber. The rough lumber has mild bows in it, and you place the concave edge face down, and a wide spiral cutter will flatten that side out (maybe after a few passes). You can then use a...
It's my friends shop, but he's a beginner too. He's always wanted to get into woodworking so he saved up a good chunk of money and finally went through with it. I got the wood from a hardwood supplier warehouse, it was about 28 bucks total for both pieces, and I had probably around 50%...
I started out with a simple basic project of building an end-grain cutting board based on the video tutorial I found from the Wood Whisperer. Overall, it went really smoothly, with a few minor hiccups (the belt sander will really f-up a piece of wood quick :P). Here are the pics:
The shop...
Not sure if this belongs here or in software, but...
A lot of times when I take basic P&S photos with my new camera, the flash will create bright spots on peoples foreheads from the combination of light + sweat/grease. Is there an easy way to touch these up with photoshop? I've mostly been...
I just got a quote from a highly recommended doctor who charges 3750 total for both eyes regardless of technology (Lasik, PRK, Custom, Wavefront, etc). Does this seem too high?
Thanks!
Is the picture quality with the SD870 (or any 8* series) going to be worth the extra ~$60 over the price of the SD1100 series? I want a decent P&S camera that will take decent pictures.
I did ask for store credit, that's all I expected. The tuner does not work completely, the remote doesn't work at all and I spent an hour with the manufacturers tech support trying random suggestions. Anyway, I filed a complaint with the BBB, doesn't seem like I have much other recourse.
I redeemed 5000 amex points for a $50 dell certificate and bought a tv tuner with it. TV tuner ends up being a piece of crap, so I ask for a refund and assume that I'll get to re-use my $50 certificate. Dell says the gift certificate is non-refundable and won't budge. I feel like I got...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.