i need more than 700 watts of power. Is there a way to use two PSU in a system if I can physically fit them in. Like can I use two truepower 550 from Antec.
How can i force second power supply to supply power even though it is not plugged in to motherboard.
any ideas
I have an ANTEC 1440B case with the std 400 watt power supply. I am planning on running 15 LVD drives in a raid setup. THe motherboard is INTEL STL2 (dual PIII, 933). what are my options for more power. How much is required for such a setup? Can I splice two power supplies to get more power...
I need to up grade a few PII 233 machines. looking fora cheap solution good enough to beat 1000 celeron. need on board audio
any suggestions
:)
Srinivas
I am looking for a server case with split back plane and removable drive bays to use with a raid card and hot swappable drives. Anyone know where I an find them. looking to biuld a raid 5 ultra 160 system with 6 drives. Dual athlons.
andhra
I want to build a dual 1800 MPX system with Raid 5 with hot swap/plugging capability for the drives.
Is hot swap/plugging capability a feature or raid card or MOBO or the drive cage?
is there a case that can take a atx mobo and offer hot swap capability
I am planning to buy 50 systems for my company from Micron. They are using the MSI Nvidia board in their athlon based system. How is this board? Any input / Advise is appreciated. Thank you
<FONT size=2>
Hi,
I just installed a Tiger Tyan MP (bios ver 1.03) with two AMD 1800 MP. I am using Globalwin CAK38 heat sinks on the CPU's. The Heat Sinks have 6800 rpm fans. When I check the hardware monitoring in the BIOS, the temperature shows up as 75C for both the CPU's and the fan Speed...
Do 2460 and 2462 use the same power supply?
does the power supply coming with antec1240 support 2460.
what are model number and manufacturers that have PSU for 2460 and 2462.?
can the power supply that is compatible with 2462 be used with a normal ATX board?
I am getting a tyan 2460 with dual 1800's. the case will be Antec 1240. Should I buy the retail cpu's and use the fan it came with or buy oem and buy my own heat sink & fan.
if OEM which should I use. I know pal 8045 will not work with 2460.
thanks
<FONT color=#ff0000 size=5>is fsb setup in bios or by jumpers and are the increments by 1. Basically is it as good as in Abit KG7.
</FONT>
should I go for GA-7VTXH or EPOX EP-8KHA+ or MSI K7T266 PRO2
I am happy the way its running. If I can run my applications without uping the voltage at this speed with the stability, I am fine. I might try going up on the FSB.
Kg7-raid
1.4 Athlon
512 registered pc2100 Crucial DDR ram
ATI AIW radeon 32 MB
WINDOWS 2000 SP2
Sound blaster live
sx1040 case wih four case fans
seagate barracuda III ATA 100 20 gb drive
taisol heat sink with a delta fan
CPU scores from sandra @ 10 X 158
ALU - 4340
FPU - 2163
Memory scores...
Hi,
I will getting my KG7-Raid with 1.4 and 2 256 Registered crucial memory. this week.
any pit falls I need watch out for?
or any advise
edit
anybody read the following article
amd 760 - registered memory problems
does the problem exist still.
Hi I Pre ordered my KG7-Raid with a 1.4 from microbarn. should be here sometime next week. I am going with crucial registered memory, so that I can fill all the four slots ( 2 right now, more later when 512 come). Crucial has two registered (256 mb) memory modules. the differnece between them is...
Hi I am replaing abit kt7a-raid & 1.2 with 8k7a+ & 1.4. I have antec sx1030 case. Does the power suppy have any problem taking this board.
I am running abit board @ 9 X 145. very stable. would like OC 8k7a+ atleast by 10-15%. any problems? anything I should know before I buy.
also...
I am planning to get athlon 1.4. Looking for MOBO with audio
should I stick to Kt133a chipset, if yes which mobo would
should I go for KT266, if yes which mobo would
should I go with AMD's chip set, if yes which mobo would
not a serious over clocker
I have Abit-kt7a- raid and MSI k7tPro 2-a.
if I get 1.4 can I put it in abit k7ta, and use the present 1.2 (200fsb) in the MSI k7tPro 2-a.
also what would be a good board for Athlon 1.0
thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.