Mailed Club3D support, they replied saying that there will be a DP1.4 to HDMI 2.1 adapter in 2020-Q1. I think we are going to see more adapters like this next year, maybe a graphics card with HDMI 2.1 as well.
Is there any solutions to get 4k 60p 10-bit 4:4:4 (RGB) on a HDMI 2.1 TV (LG E9) from a PC right now?
HDMI 2.0 does not have enought bandwidth to support 10bit with 4:4:4 chroma at 4k 60p as far as I know. Is there any adapter/cable which would convert the display port of the GPU (1080ti in my...
What I found out is that this AMD raidxpert creates a so called 'Legacy Array' for the new drives automatically if they already have data on them, and you can't (re)create legacy array yourself after you deleted them, like you can create the other volume types again. So it is better to create a...
Asus ROG Zenith Extreme
win 10 64bit
Raid created through the motherboard's BIOS RaidXpert utility (AMD)
I have 4x10TB hard disks in the system. I created one RAID0 array combining two of the drives, and I left the other two as is, but it created two more arrays for the two 'non-raid' drives as...
To any asus Z10PE D8 board user..
Under IntelRCSetup - QPI Configuration what happens if you set the Snoop Mode to Cluster On Die? I read it's great for high core-count systems but actually if I set it HWinfo displays only half of the L3 cache and it changes the infos displayed from the CPU. Is...
Can someone help me out pls?
I'm totally stuck with this turbo thing.
Got an Asus Z10PE D8 WS and 2x 2696v3 QGN7.
Before the ASUS board I got the x99 Taichi. I could delete the microcode (but not in UBU) and flash the bios easily. Then I was able to run the uefi shell to have the .efi driver...
Sorry for asking but there is way to much to read: how can you make the v3x4......efi to run automatically?
For the microcode part it is enough to delete the mcupdate file in sys32 or I should use a modified bios?
There are way too much .efis. How about the...
I guess stepping 1 CPUs are pickier with RAMs.
On the other hand I think Xeon CPUs are designed to work with server RAMs (ECC, registered) but they can work in a consumer x99 board with consumer RAM (like you mentioned) anyway..
Thank you very much for the details!
It turned out that I'll get 2 pieces of QGN7. I also have a SR1XK. I guess I keep the 2 QS chips and sell the SR1XK and then I'm not going to use 2 sligtly different ships. (since they not that different like an earlier ES chip as far as I know) What do you...
It can be CPU error
Even if it's not fitted properly can cause this problem but the socket has not much play with the cpu and with the cooler on it there's not much chance for this.
Faulty CPU can be
Thank you very much for the detailed reply and the pictures! Same board same second cpu and same cpu coolers will arrive soon haha. Will try out what you recommended.
How does a [SR1XK] E5-2696v3 (non-ES) would match to a [QGN7] one which is ES or QS but both has the same specs in CPU-Z except the ES mark behind the name in a dual socket asus z10pe d8 motherboard?
What method and ucode do you use to boost the clocks with the ASUS Z10PE-D8 WS and the 2696v3?
I used the taichi x99 to this date but I don't like it. (18 cores at 3.2Ghz)
The ASUS Z10PE-D8 WS is on the way (I only have 1x E5 2696v3 for now) that's why I'm asking and trying to save a lot of...
Have you found any answers? I'm in the same shoes.
What are the problems with the Asus board you mentioned?
I have better experience with Asus boards than ASRock ones in general. But this is an other scenario.
I'm thinking about buying the z10pe d8 or 16 from asus.
Don't know which one. I only have 4 ram sticks 16gb/stick atm. The d16 has that 'ipmi' built in while with the d8 it's a separate purchashe.
Would buy an other 2696v3 for that.
So you are experiancing same performance with the asrock...
I see. I have the cores at ~1,2ghz at idle (normal mode - not performance nor power saving) (windows - taichi - 2696 v3 - 50_vcc.efi or 50_39_vcc.efi)
Withouth microcode though I have to wait a bit after logging in to windows to have the cores at idle because they stay at ~2.3 ghz for a while.
You should delete microcode first.
On the upper picture you can see you have microcode 27 (uCU - 27) present. If you load 'v3x2_50_vcc.efi' after you deleted the microcode you should have no microcode loaded ( uCU - )
Maybe this also interacts with the 'v3x2_50_39_vcc.efi' which loads uCode 39...
You should definately try 'v3x2_50_39_vcc.efi' with microcode 39 built in or 'v3x2_50_vcc.efi' without a microcode.
https://drive.google.com/open?id=0B4nDSxzsKIeOWk1NenhDSEFRbnM - I uploaded them but have no credit
You should delete microcode and 'mcupdate_GenuineIntel.dll' from system32...
Can you disable some cores in the bios on the asus board like on the asrock one?
Then you should get higher frequencies even at stock. (without the 'hack')
I mean I get ~3,4ghz with 18 cores but with only 10 cores enabled I get ~3,9 Ghz on them.
That is what I'm interested in if you activate...
Why are those weird Mhz numbers? Are they fluctuating? Could you check it with cpu-z what mhz and how much points you get? You could try enabling only 10 cores/cpu in uefi bios. I get 3,9ghz stabile on 10 cores (out of 18). I wonder what that would be like on a dual cpu system.
This is what I achieved with the taichi - fully stabile - on 18 cores so far. Only blck changed (104.2) and with the v3x2_50_vcc.efi activated
This one with 10 cores. I don't know if it's stabile or not. (edit: not) Seems like there is a limit to increasing blck right? (while you don't freeze...
If I run cpu-z bench I get lower points when no other programs are used. When I run the benchmark when some other program generates some cpu load the points goes up higher. (~7300 vs ~8300)
Why is that?
I changed the ram order on the x99 taichi board like @XDrego said. (2-2 from outside, not A1...
I get the exact same results with the same board and cpu. (v3x2_50_39_vcc.efi)
That would have been my 1st question if it is normal or not.
In cpu-z I get 3.2Ghz but some other things like premiere pro rendering I get 3.1Ghz. ( no blck changed)
If I load 'v3x2_50_vcc.efi' (so no microcode loaded...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.